10-15-2006, 12:14 AM | #1 |
Senior Member
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 3,904
|
I made it!!with pics this time
Hey guys, I made it back from Ga. I looked liked the beverly hillbillys. I bought a 68 swb fleetside off ebay. When I went down there, The guy said you can have everything here for a 67 -72 chevy gmc truck for such price. With a little thinking and looking at what he had. I bought it all or all I could fit on my truck and trailer. I now have a 454 bb long block 400 sb block only350 sb block only . 2 67 68 grills 2 67 68 hoods. 2 short fleet beds which are in really solid shape. a couple of sets of doors. and a few other things. I will have to get pictures later. Now that I have a big block to work with I might be putting it in my ride. I was going to put a 383 stroker in but now I don't know.
Last edited by BarryB; 10-16-2006 at 06:16 PM. |
10-15-2006, 12:26 AM | #2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: I made it!!
look at the prices for everything you'll need on that big block before you decide to go that route. Everything from carb to pan, and from flywheel to fan. You'll probably start to cry.
|
10-15-2006, 02:12 AM | #3 |
Registered User
Join Date: Apr 2006
Location: oklahoma
Posts: 10,669
|
Re: I made it!!
It sounds like you made a killing down there. Cant wait to see the pics.
Aaron |
10-15-2006, 03:07 AM | #4 |
KEEP ON TRUCKIN'
Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,730
|
Re: I made it!!
Damn! I wish I was still in the states, I would help you use some of those parts.
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" |
10-15-2006, 07:44 AM | #5 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: I made it!!
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
10-15-2006, 08:37 AM | #6 |
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
|
Re: I made it!!
Congrats on your score. Good to hear that all the good deals aren't a 1000 miles away.
__________________
Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
10-15-2006, 08:37 AM | #7 |
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: I made it!!
I agree if I would have just went with a 350 the truck would have been a driver by now....
__________________
GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
10-15-2006, 09:24 AM | #8 |
Registered User
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
Re: I made it!!
IT COSTS ME TWICE AS MUCH TO BUILD A BIG BLOCK AS IT DOES TO BUILD A SMALL BLOCK... SO WHAT... YOU WIND UP WITH THREE Xs THE MOTOR TOO. IF YOU CAN'T AFFORD TO PAY.... WELL YOU CAN'T PLAY EITHER. I KNOW... I KNOW.... THE JUNKYARDS ARE JUST FULL OF $200 CADDY MOTORS... I WONDER WHY??? JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
10-15-2006, 10:49 AM | #9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: I made it!!
No, i wasn't even going there, I've seen plenty of times, where the coolness factor of a big block gets in the way and then you end up way over budget. Big block chevy parts are stupid expensive, and there is no way to deny that.
|
10-15-2006, 11:08 AM | #10 |
Senior Member
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 3,904
|
Re: I made it!!
As for the the big block parts I will need. It is only missing an intake. I have the heads, flywheel balancer oilpan etc.. And I also got a boat load of Holley parts. Now the brackets that I would need for the acc. Doesn't have air. but it does have power steering. any body know how hard these parts are hard these parts are to get.
|
10-15-2006, 11:39 AM | #11 |
Senior Member
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 3,904
|
Re: I made it!!
I will be trying to sell some of the parts I will not be using. but i am not sure yet what exactlly I will be needing to keep. So keep your eyes out in the classifieds.
|
10-15-2006, 06:40 PM | #12 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: I made it!!
keep me in mind for one of the short beds.
Thanks, Steve |
11-17-2006, 06:04 PM | #13 |
Senior Member
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,476
|
Re: I made it!!
What's up with the tailgate with the letters upside down??? THAT's gotta be rare...
I'm going nuts...
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 |
11-17-2006, 06:30 PM | #14 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: I made it!!
Also in the 1st pic that bed that's upside down, weird body line
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
11-17-2006, 06:31 PM | #15 |
village idiot
Join Date: Oct 2006
Location: Barbourville,KY
Posts: 176
|
Re: I made it!!
|
11-17-2006, 09:24 PM | #16 |
Born To Lose Club
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,307
|
Re: I made it!!
Conngrats!
__________________
Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
11-17-2006, 09:41 PM | #17 |
Registered User
Join Date: Oct 2006
Location: Porterville, CA
Posts: 146
|
Re: I made it!!
if you decide to sell one of thoes beds send me a PM please. very nice.
|
11-17-2006, 11:44 PM | #18 | |
Senior Member
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 3,904
|
Re: I made it!!
Quote:
No really the guy I bought it off of, is a body fabricator and he cut the panel and flipped it over for the same effect it is having on here already. I am most likely going to leave it that way. |
|
11-18-2006, 12:05 AM | #19 |
Registered User
Join Date: Oct 2006
Location: Evans, Colorado
Posts: 530
|
Re: I made it!!
I like the topper!
|
11-18-2006, 12:20 AM | #20 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: I made it!!
Now that tailgate is different! It would take a while to decide on that one. Or is this just proof that it pays to always wear a respirator?
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
Bookmarks |
|
|