need disc brake code - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davesamnesia · 11-08-2006, 08:06 PM

I installed front disc brakes on my 70 Blazer and am going to change the decal in glove box. Does anyone have the correct code and listing for this on a 4wd? Thanks, Dave

Longhorn Man · 11-08-2006, 09:01 PM

there is no code, it was never an option

PanelDeland · 11-08-2006, 09:04 PM

Uhhhhhhh,It's the 70 in your sig,right?
If so you probably already know this,but just didn't think.There isn't a code for disc in 70 since it wasn't an option.Unless the 4X4 did have that option.
In fact I didn't find an option code for the 71 either since it was standard then.Maybe someone will clarify if I ttt for ya.

davesamnesia · 11-09-2006, 04:25 AM

I know that this wasn't an option on the '70 but was on '72. That is the front axle I am using. Just wanted to make a new ID sticker. If I ever sell this (which I doubt) It'll take someone a case of beer, and a lot of head scratching to figure it out. Here is what it looks like after paint. New motor, trans, 4:10 posi gears,discs and a whole lot of work.
Dave

Longhorn Man · 11-09-2006, 06:05 AM

nope, never an option.
Disks were standard in 71 to date.

11-08-2006, 08:06 PM	#1
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	need disc brake code I installed front disc brakes on my 70 Blazer and am going to change the decal in glove box. Does anyone have the correct code and listing for this on a 4wd? Thanks, Dave __________________ 70 K5 350/350 Air Dave

11-08-2006, 09:01 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: need disc brake code there is no code, it was never an option

11-08-2006, 09:04 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: need disc brake code Uhhhhhhh,It's the 70 in your sig,right? If so you probably already know this,but just didn't think.There isn't a code for disc in 70 since it wasn't an option.Unless the 4X4 did have that option. In fact I didn't find an option code for the 71 either since it was standard then.Maybe someone will clarify if I ttt for ya. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-09-2006, 04:25 AM	#4
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: need disc brake code I know that this wasn't an option on the '70 but was on '72. That is the front axle I am using. Just wanted to make a new ID sticker. If I ever sell this (which I doubt) It'll take someone a case of beer, and a lot of head scratching to figure it out. Here is what it looks like after paint. New motor, trans, 4:10 posi gears,discs and a whole lot of work. Dave Attached Images __________________ 70 K5 350/350 Air Dave

11-09-2006, 06:05 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: need disc brake code nope, never an option. Disks were standard in 71 to date.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.