sm465 to np205 coupler - The 1947 - Present Chevrolet & GMC Truck Message Board Network

403oldsman · 11-15-2006, 11:34 AM

I'm in the middle of an over haul of a sm465 in I need a new mainshaft and a coupler to my transfer case. The splines on the transfer case look fine but the mainshaft is about half there and the coupler is about a 1/16 there so i need a new one. My problem is finding a coupler that is 10 splined and 4.75" long. I found a mainshaft for about $75,and an overhaul kit for $150, but haven't found a couple for less than $90. If anyone knows where I can get these parts cheaper or a good quality ( if its good quality i dont have a problem with how much it costs like made in USA).

I problem that happened with the trans mission was the roller bearings between the input shaft and the mainshaft stopped rolling and when i would let the clutch out when it was in neutral it would kill the engine.

Does anyone know of anything else i should check while i have the tranny apart.

Thanks,
Mark

**Yukon Jack** · 11-15-2006, 02:49 PM

A guy over on ck5.com has some sleeves for sale in the tranny classified section for I believe $50.00 His username is thatk30guy.

Blazer1970 · 11-15-2006, 06:03 PM

Quote:

Originally Posted by Yukon Jack

A guy over on ck5.com has some sleeves for sale in the tranny classified section for I believe $50.00 His username is thatk30guy.

I can vouch for thatk30guy, he is a long time member at ck5, and I have purchased stuff from him before.

403oldsman · 11-15-2006, 10:13 PM

thanks for the help guys. I'll try to get in touch with him.

Mark

**kwmech** · 11-15-2006, 11:16 PM

You can get the couplers at the chevy dealer for about 40.

403oldsman · 11-16-2006, 10:08 AM

Do you know what the gm part number is?

Thanks
Mark

**kwmech** · 11-16-2006, 04:40 PM

GM part number is 6259656. My cost is 34.50 retails for 45.42

Dean · 11-16-2006, 07:05 PM

I got mine from GM also.

403oldsman · 11-17-2006, 12:02 PM

Thanks for the help. I have a buddy who can get parts at cost through gm so I'll see what i can do.

Thanks
Mark

**Yukon Jack** · 11-17-2006, 10:24 PM

I'm amazed at those prices, I could swear I saw them listed somewhere for like $90 or so - guess that just shows, always need to check out the GM parts department.

11-15-2006, 11:34 AM	#1
403oldsman Registered User Join Date: Mar 2005 Location: Van Horne, Iowa Posts: 46	sm465 to np205 coupler I'm in the middle of an over haul of a sm465 in I need a new mainshaft and a coupler to my transfer case. The splines on the transfer case look fine but the mainshaft is about half there and the coupler is about a 1/16 there so i need a new one. My problem is finding a coupler that is 10 splined and 4.75" long. I found a mainshaft for about $75,and an overhaul kit for $150, but haven't found a couple for less than $90. If anyone knows where I can get these parts cheaper or a good quality ( if its good quality i dont have a problem with how much it costs like made in USA). I problem that happened with the trans mission was the roller bearings between the input shaft and the mainshaft stopped rolling and when i would let the clutch out when it was in neutral it would kill the engine. Does anyone know of anything else i should check while i have the tranny apart. Thanks, Mark __________________ THERE is NO REPLACEMENT FOR DISPLACEMENT 1971 CHEVY 4X4 4SPD 406 CHEVY Lockers front and back 1978 BONNEVILLE 403 OLDS 1985 K1500 F5L912 Deutz Power (work in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=389561 1963 Oliver 1600 diesel 1956 Oliver Super 88

11-15-2006, 02:49 PM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: sm465 to np205 coupler A guy over on ck5.com has some sleeves for sale in the tranny classified section for I believe $50.00 His username is thatk30guy. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

11-15-2006, 10:13 PM	#4
403oldsman Registered User Join Date: Mar 2005 Location: Van Horne, Iowa Posts: 46	Re: sm465 to np205 coupler thanks for the help guys. I'll try to get in touch with him. Mark __________________ THERE is NO REPLACEMENT FOR DISPLACEMENT 1971 CHEVY 4X4 4SPD 406 CHEVY Lockers front and back 1978 BONNEVILLE 403 OLDS 1985 K1500 F5L912 Deutz Power (work in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=389561 1963 Oliver 1600 diesel 1956 Oliver Super 88

11-15-2006, 11:16 PM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: sm465 to np205 coupler You can get the couplers at the chevy dealer for about 40.

11-16-2006, 10:08 AM	#6
403oldsman Registered User Join Date: Mar 2005 Location: Van Horne, Iowa Posts: 46	Re: sm465 to np205 coupler Do you know what the gm part number is? Thanks Mark __________________ THERE is NO REPLACEMENT FOR DISPLACEMENT 1971 CHEVY 4X4 4SPD 406 CHEVY Lockers front and back 1978 BONNEVILLE 403 OLDS 1985 K1500 F5L912 Deutz Power (work in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=389561 1963 Oliver 1600 diesel 1956 Oliver Super 88

11-16-2006, 04:40 PM	#7
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: sm465 to np205 coupler GM part number is 6259656. My cost is 34.50 retails for 45.42

11-16-2006, 07:05 PM	#8
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Re: sm465 to np205 coupler I got mine from GM also.

11-17-2006, 12:02 PM	#9
403oldsman Registered User Join Date: Mar 2005 Location: Van Horne, Iowa Posts: 46	Re: sm465 to np205 coupler Thanks for the help. I have a buddy who can get parts at cost through gm so I'll see what i can do. Thanks Mark __________________ THERE is NO REPLACEMENT FOR DISPLACEMENT 1971 CHEVY 4X4 4SPD 406 CHEVY Lockers front and back 1978 BONNEVILLE 403 OLDS 1985 K1500 F5L912 Deutz Power (work in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=389561 1963 Oliver 1600 diesel 1956 Oliver Super 88

11-17-2006, 10:24 PM	#10
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: sm465 to np205 coupler I'm amazed at those prices, I could swear I saw them listed somewhere for like $90 or so - guess that just shows, always need to check out the GM parts department. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.