will this work for p/s on a 292? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC 3 · 05-02-2002, 09:02 AM

Pulled a power brake bracket off of a '78 1 ton that had power brakes which run off of a pump that looks identical to a p/s pump. It was mounted on the drivers side above the alternator. will this bracket work for my p/s set up thanks

boilrman · 05-02-2002, 10:21 AM

sounds like it may. Does the bracket also have a spot for holding the alternator?

When I converted my non p/s 250 to p/s, the bracket for the alternator I had was no longer needed.

------------------
1971 Chevy 1/2t, 350 -- SOLD
1998 Yamaha V-Star 650
1970 Chevy 3/4t, I6(freshly rebuilt), 4 speed
Keokuk,IA

http://communities.msn.com/SchweringFamily/shoebox.msnw

MSN Messenger = boilrman
Find a job you love and you'll never have to work a day in your life.

JJR · 05-02-2002, 11:54 AM

Does the 1-ton have a 292? If so, the pump mounting brackets would work for your 292.

*Fast68Chevy* · 05-02-2002, 02:44 PM

1 ton wil be 292 if original

that hydraulic brakes steering combo is called hydroboost, is hydraulic power brake booste,r not a vacuum power booster, hydraulic boost is commonly found on 70s and 80s caprices and buicks and olds cars with olds 350 diesel originally, i have cut up a couple of such cars out here wish i had saved the hydroboosts off them,

in fact my new neighbor has a demo car, a 79 buick park avenue with hydroboost brakes steering pump combo, car is a junker ruster and is all strippee ready to be trashed in demo this summer, its a HUGE thing everyone wants in it, over a 100 cars a year locally get ruined in it, not many left, ppl pay lotsd of $$$$$ for a rear wheel drive car of any kind and especially wagons which you wont get your hands on one in this region because are gone from existence due to all this every year in every town aorund,. no 60s cars and no early 70s cars left either at all, none not a one now. late 70s are few and far between, and all the trucks are engine donors so there goes all trucks also, we arent winning here, if its not rust cancer epidemic then its demo derbies.

good luck !

------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham

current fleet: -71 C-10 350/CH465/3.07- basketcase
-84 Z28 5.0L/700R4/3.73 daily driver
-84 Firebird/SE 2.8L/T-5/3.73/engine bad
-82 purple Trans Am, project #2
*Paint is overrated*
© RSS Enterprises 2000

[This message has been edited by Fast68Chevy (edited May 02, 2002).]

05-02-2002, 09:02 AM	#1
GMC 3 Registered User Join Date: Dec 2001 Location: Philadelphia, pa. U.S.A. Posts: 87	will this work for p/s on a 292? Pulled a power brake bracket off of a '78 1 ton that had power brakes which run off of a pump that looks identical to a p/s pump. It was mounted on the drivers side above the alternator. will this bracket work for my p/s set up thanks

05-02-2002, 11:54 AM	#3
JJR Registered User Join Date: Apr 2000 Location: Leesburg, GA Posts: 746	Does the 1-ton have a 292? If so, the pump mounting brackets would work for your 292. __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed

05-02-2002, 10:21 AM	#2
boilrman 70 Chevy 3/4t Join Date: Sep 2000 Location: Kokomo,IN USA Posts: 1,230	sounds like it may. Does the bracket also have a spot for holding the alternator? When I converted my non p/s 250 to p/s, the bracket for the alternator I had was no longer needed. ------------------ 1971 Chevy 1/2t, 350 -- SOLD 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6(freshly rebuilt), 4 speed Keokuk,IA http://communities.msn.com/SchweringFamily/shoebox.msnw MSN Messenger = boilrman Find a job you love and you'll never have to work a day in your life. __________________ Find a job you love and you'll never have to work a day in your life. 1998 Yamaha V-Star 650 1970 Chevy 3/4t, I6 (rebuilt), 4 speed Kokomo,IN

05-02-2002, 02:44 PM	#4
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	1 ton wil be 292 if original that hydraulic brakes steering combo is called hydroboost, is hydraulic power brake booste,r not a vacuum power booster, hydraulic boost is commonly found on 70s and 80s caprices and buicks and olds cars with olds 350 diesel originally, i have cut up a couple of such cars out here wish i had saved the hydroboosts off them, in fact my new neighbor has a demo car, a 79 buick park avenue with hydroboost brakes steering pump combo, car is a junker ruster and is all strippee ready to be trashed in demo this summer, its a HUGE thing everyone wants in it, over a 100 cars a year locally get ruined in it, not many left, ppl pay lotsd of $$$$$ for a rear wheel drive car of any kind and especially wagons which you wont get your hands on one in this region because are gone from existence due to all this every year in every town aorund,. no 60s cars and no early 70s cars left either at all, none not a one now. late 70s are few and far between, and all the trucks are engine donors so there goes all trucks also, we arent winning here, if its not rust cancer epidemic then its demo derbies. good luck ! ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham current fleet: -71 C-10 350/CH465/3.07- basketcase -84 Z28 5.0L/700R4/3.73 daily driver -84 Firebird/SE 2.8L/T-5/3.73/engine bad -82 purple Trans Am, project #2 Paint is overrated* © RSS Enterprises 2000 [This message has been edited by Fast68Chevy (edited May 02, 2002).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.