I need help adjusting Kickdown cable on a TH350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevylowrider · 11-20-2006, 08:29 PM

I swapped my edelbrock 1406 out & installe d aRoad Demon, now my truck doesn't kick down into passing gear, I know I have to hold the pedeal to the floor to adjust the kickdown cable, I just don't get how to adjust it, do you have to remove the cable from it's bracket? or is it that little tab on the cable directly in front of the bracket? (you can see it in the closeup shot) I'd appreciate it if anyone could tell me how to adjust it, thank you.

qksilver · 11-20-2006, 08:53 PM

Is it still hooked up at the transmission end?
I have had one fall off after messing around with a new carb

71chevylowrider · 11-20-2006, 08:55 PM

it's still hooked up, if I pull on it I can feel where it finally starts pulling on the linkage of the tranny. I never took it off of the bracket so it kept it from coming off down below

jhow66 · 11-20-2006, 11:56 PM

Pull up on the cable lock shown in photo-push pedal to floor-with petal to floor push the cable lock back down.

71chevylowrider · 11-21-2006, 12:23 PM

Thanks JW, It's hard to see way back there, at least now I know what to pry up on.

11-20-2006, 08:29 PM	#1
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	I need help adjusting Kickdown cable on a TH350 I swapped my edelbrock 1406 out & installe d aRoad Demon, now my truck doesn't kick down into passing gear, I know I have to hold the pedeal to the floor to adjust the kickdown cable, I just don't get how to adjust it, do you have to remove the cable from it's bracket? or is it that little tab on the cable directly in front of the bracket? (you can see it in the closeup shot) I'd appreciate it if anyone could tell me how to adjust it, thank you. Attached Images

11-20-2006, 08:53 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: I need help adjusting Kickdown cable on a TH350 Is it still hooked up at the transmission end? I have had one fall off after messing around with a new carb

11-20-2006, 08:55 PM	#3
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: I need help adjusting Kickdown cable on a TH350 it's still hooked up, if I pull on it I can feel where it finally starts pulling on the linkage of the tranny. I never took it off of the bracket so it kept it from coming off down below

11-20-2006, 11:56 PM	#4
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: I need help adjusting Kickdown cable on a TH350 Pull up on the cable lock shown in photo-push pedal to floor-with petal to floor push the cable lock back down. Attached Images __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

11-21-2006, 12:23 PM	#5
71chevylowrider Senior Member Join Date: Sep 2006 Location: Vancouver, WA Posts: 1,015	Re: I need help adjusting Kickdown cable on a TH350 Thanks JW, It's hard to see way back there, at least now I know what to pry up on.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.