rocker panels......... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QKENUF4U · 11-21-2006, 09:42 PM

hey
so are the spot welds/little bit of sealant the only things holding the rockers on ??? if i drill the welds out willl the old rocker just fall off ? is there a write up on replaceing them ?
thanks
lance

Sweet72 · 11-21-2006, 09:47 PM

Yes the spot welds are all that holds 'em on. And no, they won't just fall off, some prying, cussing and chiseling is required to get them off. I don't know of a write up.

arkracing · 11-21-2006, 09:52 PM

Quote:

Originally Posted by Sweet72

Yes the spot welds are all that holds 'em on. And no, they won't just fall off, some prying, cussing and chiseling is required to get them off. I don't know of a write up.

Yeah what he said.

basically drill out all the spots welds with a spot weld cutter - try to pry it off and find the spot welds that you missed, and the ones that you didn't cut "centered" re-drill/repeat and continue till the rocker comes off.

Try not to damage anything else by bending and prying

**Hart_Rod** · 11-21-2006, 09:52 PM

Q check out my Burb link:

http://67-72chevytrucks.com/vboard/s...=200387&page=2

I just replaced the rockers and part of the floors on both side.

11-21-2006, 09:42 PM	#1
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	rocker panels......... hey so are the spot welds/little bit of sealant the only things holding the rockers on ??? if i drill the welds out willl the old rocker just fall off ? is there a write up on replaceing them ? thanks lance

11-21-2006, 09:47 PM	#2
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: rocker panels......... Yes the spot welds are all that holds 'em on. And no, they won't just fall off, some prying, cussing and chiseling is required to get them off. I don't know of a write up. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

11-21-2006, 09:52 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: rocker panels......... Q check out my Burb link: http://67-72chevytrucks.com/vboard/s...=200387&page=2 I just replaced the rockers and part of the floors on both side. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.