Misc. parts F/S

[msgross]

Originally Posted by BowTieOgre

Im not sure how I would ship something like that which is why I listed it in the will NOT ship list...any suggestions? It looks like DHL would be about $80 which doesnt seem very cost effective.

Former 67R10 here btw. Fly Army!

hmmm, Apaches huh... sorry! at least you stayed emplyed being a mechanic on those!

just kidding, My new boss (LTC) is a gundriver and the funny thing is our unit is Utility/Cargo all the way. Needless to say he get a few jabs from us Hawk guys whenever we get a chance.

I thought it wouldn't hurt to ask on the fenders, they are a little big and bulky. thanks.. Pensacola, FL...great place i watched an airshow on the beach on year

[BowTieOgre]

Originally Posted by msgross

hmmm, Apaches huh... sorry! at least you stayed emplyed being a mechanic on those!

Ouch, and the ref takes a point away! All good man, I know how you lawn dart guys can get.

I just weighed the inners in the garage on a bathroom scale (not too accurate i know) and it was more than I had guessed and totally not worth it for the shape these are in. GL finding some near you.

[BowTieOgre]

Ttt

[Scott Johnson]

I would like the carrier out of the 12 bolt if it is a series 4 and you are willing to part it and ship.

[BowTieOgre]

Originally Posted by Scott Johnson

I would like the carrier out of the 12 bolt if it is a series 4 and you are willing to part it and ship.

Unfortunately it is a 3 series.

[blue 71]

would you take $25 shipped to 72022 on the bumper guards,
also do you have an ac condensor, how much.

thanks richard

[BowTieOgre]

Originally Posted by blue 71

would you take $25 shipped to 72022 on the bumper guards,
also do you have an ac condensor, how much.

thanks richard

I will take $25 shipped and yes I do have a condenser, I will get a pic up tomorrow.

[neal]

I'm grounded till I find a pully for my sagniaw p/s pump. I'm here in Pensacola also. I'm going up to burger king tommrow evening. Do you go up there?

[BowTieOgre]

I have wanted to ever since a buddy of mine at the office (who has a Lemans and a few C4s) mentioned it. If I can get the HEI in my Blazer in time I might ride up there. I dont have anything to help you out but I would love to hang out and shoot the ****e.

[neal]

I'm at 969-1961

[70STOVEBOLT]

Are the wheelwells sold? If not, put me in line for them. Also, could you PM me some more pics of the tailgate, I'm very interested if it's not bowed and doesn't have a lot of bondo/filler.

Thanks,
Stovebolt

[daves71k5]

Interested in tailgate, does it have any bow to it? would like more pics if possible of it. Is there much filler in it ? Can send out money tomorrow if in good enough shape. thanks Dave

[BowTieOgre]

Originally Posted by daves71k5

Interested in tailgate, does it have any bow to it? would like more pics if possible of it. Is there much filler in it ? Can send out money tomorrow if in good enough shape. thanks Dave

There is no bow to it but it does have some mud on the lower potion on the inside. A PO must have done it but I stripped all the old paint off of it and sealed it with plans on sanding it all down and using it on my truck but im not going the fleetside route anymore.

Here is a pic just before I bought it.



And here is a pic of the worst of the mud.

[blue 71]

pm sent on bumper guards & condensor

[BowTieOgre]

Originally Posted by blue 71

pm sent on bumper guards & condensor

Here are a few pics of the condensor and a closer shot of the typical handling wounds. Let me know if you are still interested.

[blue 71]

pm sent

[BowTieOgre]

You may not have seen the link in my original post but I have some LT1 parts for sale. All are out of a '96 Z28 with approx. 86k miles. Prices are OBO and INCLUDE shipping.

OBD2 PCM - $50
Engine/trans harness - $65
Intake complete with fuel rails, injectors, fuel pressure reg, throttle body and associated sensors - $120

OR

Buy it all for $200 shipped

[IvelDesigns]

can you get me a pic of the "Longbed lower drivers side rear corner patch panel"? I'm assuming you're talking about behind the rear wheel, below the body line. if so, what's shipping on that to 50325?

I also want the c-notch if it has all of the bolts and install directions. (not to worried about the directions)

[BowTieOgre]

I will get a pic up in the next day or so but yes it is for a longbed from the wheel opening to the rear from the body line down.

[tallhoedude]

How About A Set Of Doors To Summitville,in 46070.got Any More Pics Of Doors?thanks

[IvelDesigns]

Originally Posted by BowTieOgre

I will get a pic up in the next day or so but yes it is for a longbed from the wheel opening to the rear from the body line down.

perfect. I'll take it and the notch. send me a PM with the pic and payment info.

thanks!!

[BowTieOgre]

Im sorry Ivel, I was mistaken. (ive been sick lately) The bed patch panel is for the passenger side. I have one for the drivers side but half of it was cut off and used. I need to get some pics up tonight.

Tallhoedude - I can get some pics up but I really dont think it would be worth it to ship the doors and its a real PITA to get something like that packaged up.

[Hart_Rod]

Kris - Long time no see!!! Sorry to hear you've been sick. I'll jump in line for the notch in case someone passes on it. I'll be at the shop most of next week trying to make some progress on the Burb. Come by if you get a chance.

Rob

[BowTieOgre]

Originally Posted by Hart_Rod

Kris - Long time no see!!! Sorry to hear you've been sick. I'll jump in line for the notch in case someone passes on it. I'll be at the shop most of next week trying to make some progress on the Burb. Come by if you get a chance.

Rob

Yeah I know man, its been a while. Between work, the 1 year old, the holidays and BOTH the truck projects most of my extra time has been occupied with sleep. Glad to hear you are trucking along on the Burb. I will make it out as soon as I can!

If IvelDesigns passes on the notch then its yours.

[IvelDesigns]

Originally Posted by BowTieOgre

Im sorry Ivel, I was mistaken. (ive been sick lately) The bed patch panel is for the passenger side. I have one for the drivers side but half of it was cut off and used. I need to get some pics up tonight.

Tallhoedude - I can get some pics up but I really dont think it would be worth it to ship the doors and its a real PITA to get something like that packaged up.

All i really need is 5 inches of the panel for the driver side. that's 5 inches starting from the wheel well end of the panel. If you have that half, take a pic and send it to me. i'll still take it if it's what i need.