![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Mejor Que Nada
Join Date: Jun 2006
Location: texas
Posts: 232
|
Emergency Brake Problems need help
Well I went tuesday to try to get the truck inspected, all was going well until they tried the emergency brake. Lines are froze up, pedal works fine but brakes do not hold. I have soaked all lines with pentrating oil still not loosened up.
You guys have any ideas? Any pointers would be great.
__________________
The only thing that separates "Dreams" from "Reality" is TIME and MONEY!!! |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Emergency Brake Problems need help
you can either fix them or replace them(commonally available at auto parts satores)
either way you should remove old ones from the backing plates/ to fix soak in a bucket filled with a mixture of atf and kero overnight then you flex the crap out of them in s shape vigerously to try and break up the internal rust then try pulling the cable out thru the housing working it back and forth when you get the cable out of the housing wire brush real good and put a coat of wheel bearing grease on the cable and you should be good to go// i only fix the real old and rare ones that aren't available as over the counter replacements
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,513
|
Re: Emergency Brake Problems need help
-
You will probably have to replace the e-brake cable assemblys that connect to the rear backing plates. Probably not what you wanted to hear though..... ![]() LockDock
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#4 |
Mejor Que Nada
Join Date: Jun 2006
Location: texas
Posts: 232
|
Re: Emergency Brake Problems need help
Will I have to replace the intire cable or just the rear cables
__________________
The only thing that separates "Dreams" from "Reality" is TIME and MONEY!!! |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Emergency Brake Problems need help
if the front cables move freely then you only replace the rears that are connected to the backing plates
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#6 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,513
|
Re: Emergency Brake Problems need help
Could be both. I would unhook the rears and test the front. You may have to have someone underneath the truck to pull on the cable when you release the handle, to see if it moves OK. Usually the cable freezes up inside the sleeves on the rear ones.....
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Re: Emergency Brake Problems need help
Just buy new, not hard to instal, maybe do a brake job also while you are in the rear. Parts aren't too expensive and you will have an assembly that will last a long long time!!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|