Norcal: 70 or 71 Jimmy parts rig - The 1947 - Present Chevrolet & GMC Truck Message Board Network

masterbeavis · 01-07-2007, 11:01 PM

Allow me to begin by saying....

I am not parting this thing out!

Individual parts are NOT for sale unless you buy the whole truck

Sold this to a friend many moons ago, now its been dumped back into my lap. Currently located in Manteca CA.

Here is a link to more pictures
http://s14.photobucket.com/albums/a3...black%20jimmy/

I am not parting this thing out. Maybe if I say it enough I will make myself clear.

Here is what the truck has:
This thing has axles under it, unlike the first pic, this is how I found the truck.
(this hardtop is GONE,and is not included, but I will give you the one that came off of my blazer, (had a hole cut in it for a vent)
Front and rear axles. Front is 3.08, rear is 3.08??
shortblock, trans and transfer case. Engine turns freely, no pitting, could hone and re-ring
Bare heads are
462624 1978-81 350 1.94 / 1.5 Z-28 Camaro
462624 1976-87 305 - 350 1.94 / 1.5 r 2.02 / 1.6
462624 1975-86 350 - 400 76cc chamber

Decent tub, with no rot thru. It has rust, but no holes I can see. Does have issues around the windshield at the middle hardtop bolts.

Good tailgate, has one dent on the side, can be straigtened. The fin is semi straight.

has a rear driveshaft, but no yoke on the t-case
good black visors

Uncut dash, NON AC

Comes with a radiator support for a 71 chevy and a few other parts I cant name at the moment

Here is what the truck doesn't have.
Seats
Front driveshaft
Good wiring under the hood.
Busted fiberglass at the heater box
grille
front bumper (cow pusher included)
seats
Working brakes. When axles were taken, the system drained. Assume the MC is bad, and replace it.
Exhaust system

Unknowns:
Title. I dont have it, but I am in contact with the last registered owner, so getting papers will be easy once there is somebody on the hook.

condition of gas tank. Dunno if its full of bad gas, or empty. I will be the first person to find out after you drop the tank and tell me :P

If trans and transfer work. They spin, thats all I know.

this is the history of the vehicle as I know it. The truck belonged to a machinist. He lost his vision, and could not drive anymore. The truck was parked at a relatives house, and tweakers robbed the grille, aluminum heads, and go fast goodies under the hood. Truck was traded for yada yada yada a couple of times, now I have it. It is not stolen, nor is in the DMV computer, so no back fees. I am asking 600, or best reasonable offer.

masterbeavis · 01-07-2007, 11:05 PM

71jimmy · 01-08-2007, 02:07 PM

From the first pic, it looks like its got the front seats. I'm in need of a front drivers bucket with tracks. If you decide to part it put me in line first please.

I'm in Fair Oaks, just a stones throw from ya (if you have a good arm).

BigFishBobby · 01-08-2007, 02:44 PM

Man, I need some vent windows w/ good frames. If you part that thing out and the windows will fit my '69 C10, let me know.

masterbeavis · 01-08-2007, 09:51 PM

71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats)

Bigfishbobby: I just gave a set of doors away that had good vent parts, but nasty skins. Oh well. I have a couple more sets of doors kicking around, that once I get around to it, I will be dumping/hacking up. I must warn you however, that it wont be anytime soon, and once it does happen, I suck at shipping in a timely manner.

bad_turbo · 01-09-2007, 12:17 AM

trade ya a '67 burb 4x4

71jimmy · 01-09-2007, 12:22 AM

[QUOTE=masterbeavis;1976825]71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats)

Just my luck. I'm using a seat from a '74 now. Thanks for the reply.

EFI70Blazer · 01-09-2007, 04:22 AM

How much shipped to 97801 for the power brake booster support brackets?

EFI70Blazer · 01-09-2007, 04:28 AM

Also do you have these brackets and would you be willing to sell them?

69TowRig · 01-10-2007, 12:48 AM

I see Blue-dial locking hubs. What condition are the dials in? And if they are in VG condition would you part them?

71jimmy · 01-10-2007, 09:52 PM

Oh sorry, I didn't think you were selling parts off it just yet. I would be interested in the drivers seat if it is rebuildable and has the tracks. It must be for a '71/'72 and not the utility buckets. The '73 up seats are slightly different and the tracks will not fit the mounting holes. I currently have a '74 seat, so I know, already went down that road.

If you could post or email some pics, so I can get a general idea of what they are like. My email address is rolandkutz@comcast.net. And include your asking price.

Thanks

masterbeavis · 01-12-2007, 02:02 AM

ttt

LUV2XCLR8 · 01-12-2007, 07:01 PM

Is either one of the Fender badges in good condition, hard to tell from pic's

69TowRig · 01-14-2007, 12:46 PM

Quote:

Originally Posted by masterbeavis

69Towrig: The blue hubs are in OK condition. I would not want to use them on a show truck however. The chrome has been dinged from many wheel changes. The dials I dont recall if they are scratched or nicked, but I do know there is some oxidation, and deteriorating plastic that would need to be polished off.

If the dials are in good shape other than normal oxidation (mine have had Channel Locks on them a time or three) then I am interested if you end up parting them.

agronomya · 01-14-2007, 02:19 PM

Could you check the gas pedal assmebly on it for me? I need a replacement for my '69 and all 67'-70's are the same and it changed in '71. The version I need will be mounted to the firewall and the brake booster is in the way in your photo so I couldn't tell myself. I've asked a lot of people for this and haven't gotten anywhere yet but not having a gas pedal is driving me nuts.

AA

masterbeavis · 01-15-2007, 02:31 AM

one badge is in good shape, the other is missing the "MY" part of the foil.
The hubs don't have any channel lock marks on them.
The gas pedal assembly is the cable style, 71-71 type.

agronomya · 01-15-2007, 11:13 AM

OK, thanks anyways man.

masterbeavis · 08-04-2010, 09:50 PM

My friend who bought this from me wants it out of his yard, I am stuck with this thing again......

Rochlow · 08-04-2010, 10:08 PM

How is the radiator support under the battery? Is it rusted?

ConnDemned · 08-05-2010, 02:26 AM

How much for the back bumper brackets?

bigbluthng · 08-07-2010, 01:34 AM

pm sent. interested in the whole thing but had specific questions about the frame and susp. thanks

ConnDemned · 08-07-2010, 02:53 AM

Sorry thought you were parting it since everyone was asking about other parts. Guess I should have read it better. Hope you the best on its sale.

masterbeavis · 08-08-2010, 09:07 PM

no worries, three years ago I was entertaining the idea of parting it out if it did not sell as an entire unit. If it continues to sit, I will take motor/trans and linkages out and sell off carcass.

masterbeavis · 08-08-2010, 10:41 PM

**BIGJAKE97** · 08-09-2010, 01:53 AM

hey tony. so how much do you want for the jimmy this time around? is it a driver now? how much without engine/tranny/transfer? -jake

if you remeber, i bought those blazer bucket seats from you back in november of 2008.

01-07-2007, 11:01 PM	#1
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Norcal: 70 or 71 Jimmy parts rig Allow me to begin by saying.... I am not parting this thing out! Individual parts are NOT for sale unless you buy the whole truck Sold this to a friend many moons ago, now its been dumped back into my lap. Currently located in Manteca CA. Here is a link to more pictures http://s14.photobucket.com/albums/a3...black%20jimmy/ I am not parting this thing out. Maybe if I say it enough I will make myself clear. Here is what the truck has: This thing has axles under it, unlike the first pic, this is how I found the truck. (this hardtop is GONE,and is not included, but I will give you the one that came off of my blazer, (had a hole cut in it for a vent) Front and rear axles. Front is 3.08, rear is 3.08?? shortblock, trans and transfer case. Engine turns freely, no pitting, could hone and re-ring Bare heads are 462624 1978-81 350 1.94 / 1.5 Z-28 Camaro 462624 1976-87 305 - 350 1.94 / 1.5 r 2.02 / 1.6 462624 1975-86 350 - 400 76cc chamber Decent tub, with no rot thru. It has rust, but no holes I can see. Does have issues around the windshield at the middle hardtop bolts. Good tailgate, has one dent on the side, can be straigtened. The fin is semi straight. has a rear driveshaft, but no yoke on the t-case good black visors Uncut dash, NON AC Comes with a radiator support for a 71 chevy and a few other parts I cant name at the moment Here is what the truck doesn't have. Seats Front driveshaft Good wiring under the hood. Busted fiberglass at the heater box grille front bumper (cow pusher included) seats Working brakes. When axles were taken, the system drained. Assume the MC is bad, and replace it. Exhaust system Unknowns: Title. I dont have it, but I am in contact with the last registered owner, so getting papers will be easy once there is somebody on the hook. condition of gas tank. Dunno if its full of bad gas, or empty. I will be the first person to find out after you drop the tank and tell me :P If trans and transfer work. They spin, thats all I know. this is the history of the vehicle as I know it. The truck belonged to a machinist. He lost his vision, and could not drive anymore. The truck was parked at a relatives house, and tweakers robbed the grille, aluminum heads, and go fast goodies under the hood. Truck was traded for yada yada yada a couple of times, now I have it. It is not stolen, nor is in the DMV computer, so no back fees. I am asking 600, or best reasonable offer. Last edited by masterbeavis; 08-09-2010 at 12:05 AM.

01-07-2007, 11:05 PM	#2
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig Last edited by masterbeavis; 01-10-2007 at 01:32 AM.

01-08-2007, 02:07 PM	#3
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Re: Norcal: 70 or 71 Jimmy parts rig From the first pic, it looks like its got the front seats. I'm in need of a front drivers bucket with tracks. If you decide to part it put me in line first please. I'm in Fair Oaks, just a stones throw from ya (if you have a good arm). __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

01-08-2007, 02:44 PM	#4
BigFishBobby Registered User Join Date: Dec 2006 Location: OZ Posts: 75	Re: Norcal: 70 or 71 Jimmy parts rig Man, I need some vent windows w/ good frames. If you part that thing out and the windows will fit my '69 C10, let me know.

01-08-2007, 09:51 PM	#5
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig 71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats) Bigfishbobby: I just gave a set of doors away that had good vent parts, but nasty skins. Oh well. I have a couple more sets of doors kicking around, that once I get around to it, I will be dumping/hacking up. I must warn you however, that it wont be anytime soon, and once it does happen, I suck at shipping in a timely manner.

01-09-2007, 12:17 AM	#6
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: Norcal: 70 or 71 Jimmy parts rig trade ya a '67 burb 4x4 __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

01-09-2007, 12:22 AM	#7
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Re: Norcal: 70 or 71 Jimmy parts rig [QUOTE=masterbeavis;1976825]71Jimmy: The bucket seats are trashed. They were not bolted in, and are not the correct color for this rig. I assume they were for this rig, but I would have to try and install them to find out. (could be '73 or newer seats) Just my luck. I'm using a seat from a '74 now. Thanks for the reply. __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

01-09-2007, 04:22 AM	#8
EFI70Blazer Active Member Join Date: Apr 2006 Location: Pendleton, OR Posts: 243	Re: Norcal: 70 or 71 Jimmy parts rig How much shipped to 97801 for the power brake booster support brackets? __________________ Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)

01-09-2007, 04:28 AM	#9
EFI70Blazer Active Member Join Date: Apr 2006 Location: Pendleton, OR Posts: 243	Re: Norcal: 70 or 71 Jimmy parts rig Also do you have these brackets and would you be willing to sell them? __________________ Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)

01-10-2007, 12:48 AM	#10
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Norcal: 70 or 71 Jimmy parts rig I see Blue-dial locking hubs. What condition are the dials in? And if they are in VG condition would you part them? __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

01-10-2007, 09:52 PM	#11
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	Re: Norcal: 70 or 71 Jimmy parts rig Oh sorry, I didn't think you were selling parts off it just yet. I would be interested in the drivers seat if it is rebuildable and has the tracks. It must be for a '71/'72 and not the utility buckets. The '73 up seats are slightly different and the tracks will not fit the mounting holes. I currently have a '74 seat, so I know, already went down that road. If you could post or email some pics, so I can get a general idea of what they are like. My email address is rolandkutz@comcast.net. And include your asking price. Thanks __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

01-12-2007, 02:02 AM	#12
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig ttt

01-12-2007, 07:01 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Norcal: 70 or 71 Jimmy parts rig Is either one of the Fender badges in good condition, hard to tell from pic's __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-14-2007, 02:19 PM	#15
agronomya Junior Member Join Date: Jan 2007 Location: Lubbock, TX Posts: 77	Re: Norcal: 70 or 71 Jimmy parts rig Could you check the gas pedal assmebly on it for me? I need a replacement for my '69 and all 67'-70's are the same and it changed in '71. The version I need will be mounted to the firewall and the brake booster is in the way in your photo so I couldn't tell myself. I've asked a lot of people for this and haven't gotten anywhere yet but not having a gas pedal is driving me nuts. AA __________________ They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month

01-15-2007, 02:31 AM	#16
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig one badge is in good shape, the other is missing the "MY" part of the foil. The hubs don't have any channel lock marks on them. The gas pedal assembly is the cable style, 71-71 type.



Register or Log In To remove these advertisements.

01-15-2007, 11:13 AM	#17
agronomya Junior Member Join Date: Jan 2007 Location: Lubbock, TX Posts: 77	Re: Norcal: 70 or 71 Jimmy parts rig OK, thanks anyways man. __________________ They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month

08-04-2010, 09:50 PM	#18
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig My friend who bought this from me wants it out of his yard, I am stuck with this thing again...... __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

08-04-2010, 10:08 PM	#19
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Norcal: 70 or 71 Jimmy parts rig How is the radiator support under the battery? Is it rusted?

08-05-2010, 02:26 AM	#20
ConnDemned Registered User Join Date: Jul 2005 Location: Spanaway, WA Posts: 103	Re: Norcal: 70 or 71 Jimmy parts rig How much for the back bumper brackets?

08-07-2010, 01:34 AM	#21
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	Re: Norcal: 70 or 71 Jimmy parts rig pm sent. interested in the whole thing but had specific questions about the frame and susp. thanks __________________

08-07-2010, 02:53 AM	#22
ConnDemned Registered User Join Date: Jul 2005 Location: Spanaway, WA Posts: 103	Re: Norcal: 70 or 71 Jimmy parts rig Sorry thought you were parting it since everyone was asking about other parts. Guess I should have read it better. Hope you the best on its sale.

08-08-2010, 09:07 PM	#23
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig no worries, three years ago I was entertaining the idea of parting it out if it did not sell as an entire unit. If it continues to sit, I will take motor/trans and linkages out and sell off carcass. __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

08-08-2010, 10:41 PM	#24
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Norcal: 70 or 71 Jimmy parts rig __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

08-09-2010, 01:53 AM	#25
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: Norcal: 70 or 71 Jimmy parts rig hey tony. so how much do you want for the jimmy this time around? is it a driver now? how much without engine/tranny/transfer? -jake if you remeber, i bought those blazer bucket seats from you back in november of 2008. __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

Register or Log In To remove these advertisements.