71 Cab 4 Sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket · 01-16-2007, 10:20 PM

i think its all i need. i'm converting a 67 cab for use on a 70. the footbrake and fuse block the only difference between the years? oh, if the driver floor is in good shape, especially below the gas pedal, i could use it!

**Palf70Step** · 01-16-2007, 10:27 PM

71 cab would also be a cable throttle instead of a rod throttle. Gas pedal mounting and routing are different between 71 and the 67-70.

bucket · 01-16-2007, 10:33 PM

thanks bill. so it sounds like i'm good as long as i don't use that portion of this firewall.

**uncle** · 01-20-2007, 05:09 PM

Bucket, do you still need floor section?

bucket · 01-21-2007, 01:03 AM

yes i do. i still need the firewall section too. i could also use the ash tray bracket . let me know what i owe you.

thanks!

**uncle** · 01-21-2007, 08:54 AM

How much of the floor do you need?

bucket · 01-21-2007, 01:01 PM

uncle, i went out and looked at it again to get measurements. it is so small i will probably just make a patch out of scrap. its probably not worth your time to cut it out. i will just go with the piece of firewall and ash tray bracket if you have it.

Thanks!

**uncle** · 01-21-2007, 08:24 PM

72 swb chevy and bucket, I will get a quote on Monday. Thought I had a large enough box, but not. Sorry for the wait.

**uncle** · 01-22-2007, 05:13 PM

Bucket, I need your zip and are you talking about the ashtray bracket that screws in instead of being spot welded?

bucket · 01-22-2007, 05:22 PM

i'm replacing the bracket in my 67 cab that is spot welded, with one that will work for a 70 ash tray with the plastic buttons. not sure if 70 was spot welded or screwed in. i will look when i get home tonight. zip is 66205.

thanks!

bucket · 01-24-2007, 12:36 AM

uncle,

i need the bracket that is mounted with screws but i also need the plate spot welded at the bottom of the opening that the bracket screws to.

thanks

**uncle** · 01-24-2007, 04:19 PM

May take me a day or 2. I have some ,but it's a matter of putting my hands on them.

**uncle** · 02-05-2007, 04:34 PM

Bucket, is this the piece you want?

cgoodwin · 02-05-2007, 07:17 PM

what's left of the cab?

**uncle** · 02-05-2007, 08:45 PM

Just memories on that one. What are you looking for?

bucket · 02-05-2007, 10:52 PM

uncle,

i think that should work. let me know how much for the bracket and the portion of the firewall.

thanks

**uncle** · 02-06-2007, 08:58 PM

Pm sent.

72SWBChevy · 02-06-2007, 09:13 PM

pm sent

01-16-2007, 10:20 PM	#26
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale i think its all i need. i'm converting a 67 cab for use on a 70. the footbrake and fuse block the only difference between the years? oh, if the driver floor is in good shape, especially below the gas pedal, i could use it!

01-16-2007, 10:27 PM	#27
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,248	Re: 71 Cab 4 Sale 71 cab would also be a cable throttle instead of a rod throttle. Gas pedal mounting and routing are different between 71 and the 67-70. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-16-2007, 10:33 PM	#28
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale thanks bill. so it sounds like i'm good as long as i don't use that portion of this firewall.

01-20-2007, 05:09 PM	#29
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale Bucket, do you still need floor section? Attached Images

01-21-2007, 01:03 AM	#30
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale yes i do. i still need the firewall section too. i could also use the ash tray bracket . let me know what i owe you. thanks!

01-21-2007, 08:54 AM	#31
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale How much of the floor do you need?

01-21-2007, 01:01 PM	#32
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale uncle, i went out and looked at it again to get measurements. it is so small i will probably just make a patch out of scrap. its probably not worth your time to cut it out. i will just go with the piece of firewall and ash tray bracket if you have it. Thanks!

01-21-2007, 08:24 PM	#33
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale 72 swb chevy and bucket, I will get a quote on Monday. Thought I had a large enough box, but not. Sorry for the wait.

01-22-2007, 05:13 PM	#34
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale Bucket, I need your zip and are you talking about the ashtray bracket that screws in instead of being spot welded?

01-22-2007, 05:22 PM	#35
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale i'm replacing the bracket in my 67 cab that is spot welded, with one that will work for a 70 ash tray with the plastic buttons. not sure if 70 was spot welded or screwed in. i will look when i get home tonight. zip is 66205. thanks!

01-24-2007, 12:36 AM	#36
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale uncle, i need the bracket that is mounted with screws but i also need the plate spot welded at the bottom of the opening that the bracket screws to. thanks

01-24-2007, 04:19 PM	#37
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale May take me a day or 2. I have some ,but it's a matter of putting my hands on them.

02-05-2007, 04:34 PM	#38
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale Bucket, is this the piece you want? Attached Images

02-05-2007, 07:17 PM	#39
cgoodwin Registered User Join Date: Dec 2006 Location: winter haven, fl Posts: 56	Re: 71 Cab 4 Sale what's left of the cab?

02-05-2007, 08:45 PM	#40
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale Just memories on that one. What are you looking for?



Register or Log In To remove these advertisements.

02-05-2007, 10:52 PM	#41
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 71 Cab 4 Sale uncle, i think that should work. let me know how much for the bracket and the portion of the firewall. thanks

02-06-2007, 08:58 PM	#42
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 71 Cab 4 Sale Pm sent.

02-06-2007, 09:13 PM	#43
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 71 Cab 4 Sale pm sent __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

Register or Log In To remove these advertisements.