Anyone kniow where to get this part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 01-31-2007, 01:17 PM

It is the rubber boot seal for the brake rod. i have not found anyone who sells it.

Mike

jacobs · 01-31-2007, 01:28 PM

Awile back I also looked for one but couldn't find any. I used a piece of old inner tube with a slit cut in it. Once installed, it doesn't show.

dave2953 · 01-31-2007, 01:41 PM

Early Classic has them. I tried to paste the link, but it didn't work.

Go to earlyclassic.com and look under Brakes. It's the last part listed on the 4th page. Hope this helps.

**Palf70Step** · 01-31-2007, 01:42 PM

Tim Christian is where I got mine.

Probably any of the board vendors has them.

71chevytruckguy · 01-31-2007, 02:06 PM

classic muscle carries them. they're a gm resto parts dealer. they sell everything for our trucks that gm still makes. chris.

www.oldmusclecars.com

Aarons72s · 01-31-2007, 03:50 PM

Kennys trucks out side of tulsa stocks them. Go to www.kennystrucks.com.

70GMCer · 01-31-2007, 05:36 PM

Got mine from GM. They are still available as of this past Fall. Don't have the number though, sorry.....

mrbud · 01-31-2007, 05:57 PM

New guy here ,My first post.The part number for the rubber boot is
#3759198.I bought 3 last year at the local chevy dealer.
Bud

centsless · 01-31-2007, 06:20 PM

Quote:

Originally Posted by mrbud

New guy here ,My first post.The part number for the rubber boot is
#3759198.I bought 3 last year at the local chevy dealer.
Bud

Welcome to the board from MD!!!!!! Thanks for the part # !

72SWBChevy · 01-31-2007, 07:14 PM

part #3759198 www.gmpartsdirect.com
They have it. Good luck

Bob Moore · 01-31-2007, 07:55 PM

GMCPaul's also.

01-31-2007, 01:17 PM	#1
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Anyone know where to get this part It is the rubber boot seal for the brake rod. i have not found anyone who sells it. Mike Attached Images __________________ Mike Redpath Last edited by Musclerodz; 01-31-2007 at 01:17 PM.

01-31-2007, 01:28 PM	#2
jacobs Registered User Join Date: Sep 2005 Location: 9000' Mountain Man Posts: 326	Re: Anyone kniow where to get this part Awile back I also looked for one but couldn't find any. I used a piece of old inner tube with a slit cut in it. Once installed, it doesn't show.

01-31-2007, 01:42 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Anyone kniow where to get this part Tim Christian is where I got mine. Probably any of the board vendors has them. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-31-2007, 02:06 PM	#5
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Anyone kniow where to get this part classic muscle carries them. they're a gm resto parts dealer. they sell everything for our trucks that gm still makes. chris. www.oldmusclecars.com __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-31-2007, 03:50 PM	#6
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Anyone kniow where to get this part Kennys trucks out side of tulsa stocks them. Go to www.kennystrucks.com.

01-31-2007, 01:41 PM	#3
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: Anyone kniow where to get this part Early Classic has them. I tried to paste the link, but it didn't work. Go to earlyclassic.com and look under Brakes. It's the last part listed on the 4th page. Hope this helps. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 Last edited by dave2953; 01-31-2007 at 01:44 PM.

01-31-2007, 05:36 PM	#7
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Anyone kniow where to get this part Got mine from GM. They are still available as of this past Fall. Don't have the number though, sorry..... __________________ 1997 GMC Sierra Ext 1965 Mustang

01-31-2007, 05:57 PM	#8
mrbud Registered User Join Date: Jan 2007 Location: Alverton Pa Posts: 31	Re: Anyone kniow where to get this part New guy here ,My first post.The part number for the rubber boot is #3759198.I bought 3 last year at the local chevy dealer. Bud Last edited by mrbud; 01-31-2007 at 06:00 PM.

01-31-2007, 07:14 PM	#10
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: Anyone kniow where to get this part part #3759198 www.gmpartsdirect.com They have it. Good luck __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

01-31-2007, 07:55 PM	#11
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Anyone kniow where to get this part GMCPaul's also. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.