WIW - 71 SWB fleet 2WD in pieces? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 02-11-2007, 10:02 AM

It's local to me and easily delivered.

71 or 72 SWB, 2WD, rear coil, frame was stripped and repainted, new brake lines, front disc, new rad, cab was stripped and primed (good shape), steel bed with all panels to make it a 68 SWB. power steering and pump, comes with an average 350 and tranny. Tons of other parts to finish it but it's stripped to the bone right now. Good steel floor too.

My thoughts,
1. Use panels to complete my truck sell off my panels (SWB fleet)
2. Sell rolling chassis
3. Sell engine and tranny

Prices, opinions? Any interest in parts if I buy?

**special-K** · 02-11-2007, 11:23 AM

Hmmm...that`s tough.What are they asking for it?Are all those red panels original paint/rustfree?Is the cab solid or repaired?With the little I know,I`d say $750-1,000.

msgross · 02-11-2007, 12:10 PM

All panels are rust free, one bed side has small damage to rear area. Tailgate looks nice, fenders, cowl, hood, bedsides, rad support (new rad) are in good shape. Frame has been blasted and repainted and cab is ready for paint, good doors. Comes with engine and tranny (running). 5 lug disc conversion, brakes and PS w/pump. I don't think he's going to take much less than $2K since it's basically a 68 SWB Fleet ready for assymbly (minus body work/paint).

1969k10stepside · 02-11-2007, 12:12 PM

Id buy it if everything is good body wise.It will save you the trouble of replacing and repairing body panels.Are you planning on using that cab?
If you do,the truck wont be a matching numbers truck or even titled as a 4x4 unless you violate the law and switch cabs.Though....2k seems like alot of money to spend on a truck for parts.For 2k you could replace and buy alot of panels for your 68 and you wont get that much back selling it without a body.For 2k,I would pass and spend the money repairing and replacing what I already have

msgross · 02-11-2007, 12:43 PM

the only thing I wanted to use is the bed and rad w/support. The rest would sell as a rolling chasis w/cab. Doubt that I will jump on it but it would be a good start for a 2WD project.

HeavyD · 02-11-2007, 01:28 PM

Geez I don't think it is a bad deal at all, but that is probably because I live where everything is all rusted out. Depends on how much of it you can use I guess.

msgross · 02-11-2007, 03:31 PM

I can "make do" and fix mine. I would hate to get stuck with another truck (even though I would like a 2WD SWB fleet someday!) since the wife would kill me. Maybe better if I don't go for an entire truck.

If anyone is interested I can put you in contact with John that owns the truck.

**special-K** · 02-11-2007, 08:00 PM

So,he won`t part it to you?Dang!

msgross · 02-11-2007, 08:20 PM

I told him I wanted the bed but he wants to keep it together. He has 3 other trucks, one is driveable and a shed full of parts that he had on Ebay for $3500 (for all 4). He was tlaking 2500 for this truck and the running LWB 68.

vtblazer · 02-11-2007, 09:34 PM

Quote:

Originally Posted by msgross

I told him I wanted the bed but he wants to keep it together. He has 3 other trucks, one is driveable and a shed full of parts that he had on Ebay for $3500 (for all 4). He was tlaking 2500 for this truck and the running LWB 68.

Does he have a 67/68 front clip in there anywhere?

msgross · 02-11-2007, 09:46 PM

yep, hood is in the pic, rad support is correct and he said that he had the fenders in the shed. not sure about the inner fenders but he said it was all there to build a 68.

vtblazer · 02-12-2007, 01:01 PM

Quote:

Originally Posted by msgross

yep, hood is in the pic, rad support is correct and he said that he had the fenders in the shed. not sure about the inner fenders but he said it was all there to build a 68.

I guess I meant is there one available?

You had said you wanted some of those parts, right?

msgross · 02-12-2007, 01:20 PM

I could use a driver fender, inner fenders and rad support but can live without them if it comes to it. I have a great 67 fender but hate to cut out a marker light hole!

jb4short · 03-07-2007, 08:51 PM

Quote:

Originally Posted by msgross

It's local to me and easily delivered.

71 or 72 SWB, 2WD, rear coil, frame was stripped and repainted, new brake lines, front disc, new rad, cab was stripped and primed (good shape), steel bed with all panels to make it a 68 SWB. power steering and pump, comes with an average 350 and tranny. Tons of other parts to finish it but it's stripped to the bone right now. Good steel floor too.

My thoughts,
1. Use panels to complete my truck sell off my panels (SWB fleet)
2. Sell rolling chassis
3. Sell engine and tranny

Prices, opinions? Any interest in parts if I buy?

I'm interested. PM me if it's not sold.

msgross · 03-07-2007, 08:56 PM

I know another board member is talking with the guy...i'll let you know if he passes it up...

I see that your a new vendor...welcome...

**special-K** · 03-08-2007, 09:29 AM

Is this the one Shannon is looking at?We talked on the phone yesterday.He`s working on it,if that`s the one.I gave him positive advise,but if that`s the one...it`s a better start than I envisioned.

msgross · 03-08-2007, 10:35 AM

I agree, someone has but a lot of hours on the frame and cab. A little body work and its ready to start assembly...

bigblockorange · 05-08-2007, 11:42 AM

Msgross does he still have the truck for sale? Rob

**special-K** · 05-13-2007, 09:24 AM

It got sold before Shannon could get it.

02-11-2007, 10:02 AM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	WIW - 71 SWB fleet 2WD in pieces? It's local to me and easily delivered. 71 or 72 SWB, 2WD, rear coil, frame was stripped and repainted, new brake lines, front disc, new rad, cab was stripped and primed (good shape), steel bed with all panels to make it a 68 SWB. power steering and pump, comes with an average 350 and tranny. Tons of other parts to finish it but it's stripped to the bone right now. Good steel floor too. My thoughts, 1. Use panels to complete my truck sell off my panels (SWB fleet) 2. Sell rolling chassis 3. Sell engine and tranny Prices, opinions? Any interest in parts if I buy? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-11-2007, 11:23 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW - 71 SWB fleet 2WD in pieces? Hmmm...that`s tough.What are they asking for it?Are all those red panels original paint/rustfree?Is the cab solid or repaired?With the little I know,I`d say $750-1,000. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-11-2007, 12:10 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? All panels are rust free, one bed side has small damage to rear area. Tailgate looks nice, fenders, cowl, hood, bedsides, rad support (new rad) are in good shape. Frame has been blasted and repainted and cab is ready for paint, good doors. Comes with engine and tranny (running). 5 lug disc conversion, brakes and PS w/pump. I don't think he's going to take much less than $2K since it's basically a 68 SWB Fleet ready for assymbly (minus body work/paint). __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 02-11-2007 at 12:11 PM.

02-11-2007, 12:12 PM	#4
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: WIW - 71 SWB fleet 2WD in pieces? Id buy it if everything is good body wise.It will save you the trouble of replacing and repairing body panels.Are you planning on using that cab? If you do,the truck wont be a matching numbers truck or even titled as a 4x4 unless you violate the law and switch cabs.Though....2k seems like alot of money to spend on a truck for parts.For 2k you could replace and buy alot of panels for your 68 and you wont get that much back selling it without a body.For 2k,I would pass and spend the money repairing and replacing what I already have Last edited by 1969k10stepside; 02-11-2007 at 12:15 PM.

02-11-2007, 12:43 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? the only thing I wanted to use is the bed and rad w/support. The rest would sell as a rolling chasis w/cab. Doubt that I will jump on it but it would be a good start for a 2WD project. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-11-2007, 01:28 PM	#6
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: WIW - 71 SWB fleet 2WD in pieces? Geez I don't think it is a bad deal at all, but that is probably because I live where everything is all rusted out. Depends on how much of it you can use I guess. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-11-2007, 03:31 PM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? I can "make do" and fix mine. I would hate to get stuck with another truck (even though I would like a 2WD SWB fleet someday!) since the wife would kill me. Maybe better if I don't go for an entire truck. If anyone is interested I can put you in contact with John that owns the truck. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-11-2007, 08:00 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW - 71 SWB fleet 2WD in pieces? So,he won`t part it to you?Dang! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-11-2007, 08:20 PM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? I told him I wanted the bed but he wants to keep it together. He has 3 other trucks, one is driveable and a shed full of parts that he had on Ebay for $3500 (for all 4). He was tlaking 2500 for this truck and the running LWB 68. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-11-2007, 09:46 PM	#11
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? yep, hood is in the pic, rad support is correct and he said that he had the fenders in the shed. not sure about the inner fenders but he said it was all there to build a 68. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-12-2007, 01:20 PM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? I could use a driver fender, inner fenders and rad support but can live without them if it comes to it. I have a great 67 fender but hate to cut out a marker light hole! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-07-2007, 08:56 PM	#15
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? I know another board member is talking with the guy...i'll let you know if he passes it up... I see that your a new vendor...welcome... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-08-2007, 09:29 AM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW - 71 SWB fleet 2WD in pieces? Is this the one Shannon is looking at?We talked on the phone yesterday.He`s working on it,if that`s the one.I gave him positive advise,but if that`s the one...it`s a better start than I envisioned. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2007, 10:35 AM	#17
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW - 71 SWB fleet 2WD in pieces? I agree, someone has but a lot of hours on the frame and cab. A little body work and its ready to start assembly... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

05-08-2007, 11:42 AM	#18
bigblockorange Senior Member Join Date: Jan 2007 Location: central pa Posts: 428	Re: WIW - 71 SWB fleet 2WD in pieces? Msgross does he still have the truck for sale? Rob __________________ I guess you could say I’m not really lazy I’m just real good at doing nothing!!!!



Register or Log In To remove these advertisements.

05-13-2007, 09:24 AM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WIW - 71 SWB fleet 2WD in pieces? It got sold before Shannon could get it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.