How do I know If my Frame is Twisted or Bent?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smoknbarrels · 02-19-2007, 02:43 AM

I took the bed off my lwb and I am planning on cutting the frame and making it into a nice short box truck... but after looking at the back two supports connecting the frame rails together they do not measure square..? is this correct? it just doesn't seem right..
does anyone know a good and accurate way to check if a '67 frame is straight?

FarmTruk · 02-19-2007, 03:05 AM

If there's no obstructions, you can measure the frame in an X-pattern...ie: Left front to Right rear, and Right front to Left rear. Measure at same points and see if there's any difference.

Slammed66 · 02-19-2007, 03:28 AM

The 2nd crossmember in by the hard bar mount it mounted at an angle, this may be throwing you off .

fastwillie 696969 · 02-19-2007, 09:53 AM

is the right side higher than the left side my frame is twisted i noticed my bed is titling to one side got under it and found the frame at the rivets is spread

sameyrasmea72 · 02-19-2007, 11:40 AM

It is normal for the support to be at an angle.

Bob Moore · 02-19-2007, 03:52 PM

There is a ton of information shared on this site. It would help if members would read what others have posted. Maybe you could answer your question before posting it.

If you have not purchased a "Factory Assembly Manual" and a "Factory Shop Manual", I strongly advise you to do so.

This comment is not directed at smokenbarrels. As posted by FarmTruk and Slammed66, measure your frame diagonally. The 2nd from rear is mounted "non-square" and plays tricks on your eyes. You should not have a problem when you shorten your frame if you take care and double check and triple check your measurments before you cut.

smoknbarrels · 02-19-2007, 05:43 PM

Thanks guys, I was confused there for a min., yea that pan hard bar bracket is not straight..
I will be using a older thread illustraiting how to shorten the frame.. it looked very detailed.

65-72 chevytoys · 02-19-2007, 05:49 PM

Here are some typical frame specs to use to see if it is twisted.

http://www.chuckschevytruckpages.com/framespecs.html

LUV2XCLR8 · 02-19-2007, 06:06 PM

Good info on that Linky

1969k10stepside · 02-19-2007, 06:58 PM

Quote:

Originally Posted by FarmTruk

If there's no obstructions, you can measure the frame in an X-pattern...ie: Left front to Right rear, and Right front to Left rear. Measure at same points and see if there's any difference.

Thats the way I checked my truck frame

02-19-2007, 02:43 AM	#1
smoknbarrels Registered Mail Join Date: Jun 2006 Location: Alberta, Canada Posts: 513	How do I know If my Frame is Twisted or Bent?? I took the bed off my lwb and I am planning on cutting the frame and making it into a nice short box truck... but after looking at the back two supports connecting the frame rails together they do not measure square..? is this correct? it just doesn't seem right.. does anyone know a good and accurate way to check if a '67 frame is straight? __________________ '67 chev 496, lwb to swb, bagged - pro street project

02-19-2007, 03:05 AM	#2
FarmTruk In Memoriam... Join Date: Nov 2006 Location: Wallburg, NC Posts: 1,216	Re: How do I know If my Frame is Twisted or Bent?? If there's no obstructions, you can measure the frame in an X-pattern...ie: Left front to Right rear, and Right front to Left rear. Measure at same points and see if there's any difference. __________________ '68 C10 SWB 307ci 2BBL *FarmTruk Pics Here* *"You know, doing what is right is easy. The problem is knowing what is right."*

02-19-2007, 03:28 AM	#3
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: How do I know If my Frame is Twisted or Bent?? The 2nd crossmember in by the hard bar mount it mounted at an angle, this may be throwing you off . __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

02-19-2007, 09:53 AM	#4
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: How do I know If my Frame is Twisted or Bent?? is the right side higher than the left side my frame is twisted i noticed my bed is titling to one side got under it and found the frame at the rivets is spread __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

02-19-2007, 11:40 AM	#5
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: How do I know If my Frame is Twisted or Bent?? It is normal for the support to be at an angle. Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

02-19-2007, 03:52 PM	#6
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: How do I know If my Frame is Twisted or Bent?? There is a ton of information shared on this site. It would help if members would read what others have posted. Maybe you could answer your question before posting it. If you have not purchased a "Factory Assembly Manual" and a "Factory Shop Manual", I strongly advise you to do so. This comment is not directed at smokenbarrels. As posted by FarmTruk and Slammed66, measure your frame diagonally. The 2nd from rear is mounted "non-square" and plays tricks on your eyes. You should not have a problem when you shorten your frame if you take care and double check and triple check your measurments before you cut. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

02-19-2007, 05:43 PM	#7
smoknbarrels Registered Mail Join Date: Jun 2006 Location: Alberta, Canada Posts: 513	Re: How do I know If my Frame is Twisted or Bent?? Thanks guys, I was confused there for a min., yea that pan hard bar bracket is not straight.. I will be using a older thread illustraiting how to shorten the frame.. it looked very detailed. __________________ '67 chev 496, lwb to swb, bagged - pro street project

02-19-2007, 05:49 PM	#8
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: How do I know If my Frame is Twisted or Bent?? Here are some typical frame specs to use to see if it is twisted. http://www.chuckschevytruckpages.com/framespecs.html __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

02-19-2007, 06:06 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: How do I know If my Frame is Twisted or Bent?? Good info on that Linky __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.