Possible Fuel Door Options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 02-21-2007, 01:58 PM

Hey guys,

Just dropped my 2wd blazer off at the bodyshop. Me and the guy were talking about what to do with the fuel neck. He told me he'd put a door and everything on it for me. Just trying to figure out which ones you guys were using that were easiest to attain. Also what all do I need off of it.

Here's a pic of my inspiration blazer and it has a round door. I would prefer a round one

**StingRay** · 02-21-2007, 02:16 PM

The 88-98 truck fuel doors are easy to come by and look pretty good grafted into a 67-72

5150 · 02-21-2007, 03:07 PM

Thanks Sting, that's what I was leaning towards. Just wanted to check all options.

meathead95 · 02-21-2007, 05:48 PM

go to the pull a part and start looking

matthufham · 02-21-2007, 06:36 PM

also you might want to cut out the sheetmetal around the door, instead of just pulling the door off, so you can graft the sheetmetal into your bed.

watahyahknow · 02-21-2007, 07:02 PM

i liked the gas cap behind the taillight from another thread , you could hinge the taillight down and get to the cap to fill her up nothing to mess up the nice lines of the truck

cstm68 · 02-21-2007, 07:39 PM

are you using sidemarkers ?? if you are then you could use the opening sidemarker way

watahyahknow · 02-21-2007, 07:44 PM

seen one where they used a deck- waterfiller from a boatstore he put it into the wood flooring of his pickup but i think it would fit on top of the bedside too frenched in a bit to look smoot

skokie · 02-21-2007, 07:45 PM

Just curious but can you use the side marker option on a swb fleet side?

**Palf70Step** · 02-21-2007, 08:01 PM

You may also want to look at some imports, that way you can get an inside cable release for the door. I think the Caravan's also have it available (Round with the release). I definitely thing the round doors fits the lines better than any of the square ones I have seen being used.

GREASEMONKEY72 · 02-21-2007, 08:09 PM

Quote:

Originally Posted by skokie

Just curious but can you use the side marker option on a swb fleet side?

yes you can

skokie · 02-21-2007, 08:31 PM

Quote:

Originally Posted by GREASEMONKEY72

yes you can

Got any pics of that? I would need to know where to graft the door in. BTW my fuelcellguy tank will be here tomorrow

5150 · 02-21-2007, 11:42 PM

Quote:

also you might want to cut out the sheetmetal around the door, instead of just pulling the door off, so you can graft the sheetmetal into your bed.

My body guy told me to make sure I cut a good bit around the door so he could have something to work with.

Quote:

are you using sidemarkers ?? if you are then you could use the opening sidemarker way

the entire blazer will be shaved. Nothing at all on it.

I REALLY like the tail light idea. I'm going to look at that a little closer. I'm going to try to find that thread and look at that.

HuggerCST · 02-21-2007, 11:55 PM

I like the one that glock35ipsc used. The cap doesn't have to be removed to fill, because the center pushes in. I think it would work good for a sidemarker filler since the sidemarker opening is small. If I would have seen this before I started the taillight filler, I probably would have gone the sidemarker route and saved some work, but I'm happy with how it turned out. Now if I can just save enough for a custom fuel cell.

5150 · 02-21-2007, 11:57 PM

What about yours Hugger?? I just found your post.

HuggerCST · 02-22-2007, 12:12 AM

Here's mine.

HuggerCST · 02-22-2007, 12:21 AM

The only thing about mine is that I had to use the trim to cover the gap below the light. I had to do this to give it enough clearance to open. You could recess the whole light enough to clear, but would probably have to do the others to match it. You can see where I trimmed it in this pic.

skokie · 02-22-2007, 02:00 AM

Quote:

Originally Posted by HuggerCST

I like the one that glock35ipsc used. The cap doesn't have to be removed to fill, because the center pushes in. I think it would work good for a sidemarker filler since the sidemarker opening is small. If I would have seen this before I started the taillight filler, I probably would have gone the sidemarker route and saved some work, but I'm happy with how it turned out. Now if I can just save enough for a custom fuel cell.

Do you know if HuggerCST had to cut into the stake pocket at all?

cstm68 · 02-22-2007, 02:14 AM

Quote:

Originally Posted by skokie

Just curious but can you use the side marker option on a swb fleet side?

yes but i dont think anyone makes a kit. you will have to finde a fuel doore in a junk yard and use the hinge off of that iv herd that the s10 type work well

HuggerCST · 02-22-2007, 10:44 AM

Quote:

Originally Posted by skokie

Do you know if HuggerCST had to cut into the stake pocket at all?

I had to cut some of the metal out behind the tail light, but nothing inside the bed, or that will show.

Frizzle Fry · 02-22-2007, 12:26 PM

Another fuel door thread

**Hart_Rod** · 02-22-2007, 05:28 PM

I got this out of a 80's Nissan Sentra:

02-21-2007, 01:58 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Possible Fuel Door Options Hey guys, Just dropped my 2wd blazer off at the bodyshop. Me and the guy were talking about what to do with the fuel neck. He told me he'd put a door and everything on it for me. Just trying to figure out which ones you guys were using that were easiest to attain. Also what all do I need off of it. Here's a pic of my inspiration blazer and it has a round door. I would prefer a round one Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-21-2007, 02:16 PM	#2
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: Possible Fuel Door Options The 88-98 truck fuel doors are easy to come by and look pretty good grafted into a 67-72 __________________ Saskatoon, Saskatchewan Canada

02-21-2007, 03:07 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Possible Fuel Door Options Thanks Sting, that's what I was leaning towards. Just wanted to check all options. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-21-2007, 05:48 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Possible Fuel Door Options go to the pull a part and start looking __________________ 72 2wd blazer 72 swb 4x4

02-21-2007, 06:36 PM	#5
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Possible Fuel Door Options also you might want to cut out the sheetmetal around the door, instead of just pulling the door off, so you can graft the sheetmetal into your bed.

02-21-2007, 07:02 PM	#6
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Possible Fuel Door Options i liked the gas cap behind the taillight from another thread , you could hinge the taillight down and get to the cap to fill her up nothing to mess up the nice lines of the truck __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-21-2007, 07:39 PM	#7
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: Possible Fuel Door Options are you using sidemarkers ?? if you are then you could use the opening sidemarker way

02-21-2007, 07:44 PM	#8
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Possible Fuel Door Options seen one where they used a deck- waterfiller from a boatstore he put it into the wood flooring of his pickup but i think it would fit on top of the bedside too frenched in a bit to look smoot __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-21-2007, 07:45 PM	#9
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Re: Possible Fuel Door Options Just curious but can you use the side marker option on a swb fleet side? __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

02-21-2007, 08:01 PM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,220	Re: Possible Fuel Door Options You may also want to look at some imports, that way you can get an inside cable release for the door. I think the Caravan's also have it available (Round with the release). I definitely thing the round doors fits the lines better than any of the square ones I have seen being used. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 02-21-2007 at 08:02 PM.

02-21-2007, 11:55 PM	#14
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Possible Fuel Door Options I like the one that glock35ipsc used. The cap doesn't have to be removed to fill, because the center pushes in. I think it would work good for a sidemarker filler since the sidemarker opening is small. If I would have seen this before I started the taillight filler, I probably would have gone the sidemarker route and saved some work, but I'm happy with how it turned out. Now if I can just save enough for a custom fuel cell. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 02-22-2007 at 12:06 AM.

02-21-2007, 11:57 PM	#15
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Possible Fuel Door Options What about yours Hugger?? I just found your post. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-22-2007, 12:12 AM	#16
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Possible Fuel Door Options Here's mine. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-22-2007, 12:21 AM	#17
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Possible Fuel Door Options The only thing about mine is that I had to use the trim to cover the gap below the light. I had to do this to give it enough clearance to open. You could recess the whole light enough to clear, but would probably have to do the others to match it. You can see where I trimmed it in this pic. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-22-2007, 12:26 PM	#21
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Possible Fuel Door Options Another fuel door thread



Register or Log In To remove these advertisements.

02-22-2007, 05:28 PM	#22
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Possible Fuel Door Options I got this out of a 80's Nissan Sentra: Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Register or Log In To remove these advertisements.