Identi Plate? Pop-Rivets Originals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 02-23-2007, 08:48 PM

Remeber that member that had the factory 'star' type rivets that hold the metal VIN plate to the inside of the drivers door? Does anybody remember who has these?

Thanks,
72longbed

1968SWBBigBlock · 02-23-2007, 08:52 PM

Ebay

byrd · 02-23-2007, 09:18 PM

trimtags.com

1BadSS · 02-23-2007, 09:28 PM

saw them on ebay for $48 for two of them.

piecesparts · 02-23-2007, 10:08 PM

Any idea what to search under on E-bay?

1972CheyenneSuper · 02-24-2007, 01:53 AM

They are called rosette rivets.

*72longbed* · 02-24-2007, 07:50 AM

1972CheyenneSuper,

that's the ones! Where can I get some?

Thanks,
Phil aka 72longbed

piecesparts · 02-24-2007, 12:23 PM

The important thing is that the "Rosette Rivets are different than the ones on my 68. The rivets there are more of a standard design rivet, but with a 5 sided head and not starred out like a Rosette.

sixtysevengmc · 02-24-2007, 12:55 PM

got Dremel?

1BadSS · 02-24-2007, 08:16 PM

http://cgi.ebay.com/ebaymotors/GM-RE...QQcmdZViewItem

There is the link to the rivets.

1BadSS · 02-24-2007, 08:16 PM

Quote:

Originally Posted by sixtysevengmc

got Dremel?

You don't need a dremel, just a punch and a drill.

*Shane* · 02-24-2007, 08:24 PM

Quote:

Originally Posted by 1BadSS

You don't need a dremel, just a punch and a drill.

I am assuming here, but I think he meant to "square off" a standard stainless rivet to make it look like a rosette rivet.

Americanrider · 02-24-2007, 11:56 PM

For the price of 2 rivets I can buy a whole kit of dremel attachments.

piecesparts · 02-25-2007, 11:21 AM

Look at it this way, you need 4 rivets for the job (to make it look right). The dremel is a great idea, BUT can you do it to make MR. Johnny LAW believe it is the correct process. That is why these sell for so much.

67mbsc · 02-25-2007, 11:55 AM

Quote:

Originally Posted by 1BadSS

saw them on ebay for $48 for two of them.

Can't ya get them from the dealer???

Rokcrln · 02-25-2007, 12:35 PM

Just bought 4 sets for some of my projects. One was a cab change from rust and the other is just a full out resto and did not want to leave the plate on for blasting, body work and paint. Well worth the small cost. Their was a guy on here awhile ago selling them for $25ea so $50 for a set of 4 is a good deal.

Kevin
LFD Inc.

1972CheyenneSuper · 02-25-2007, 09:32 PM

....

piecesparts · 02-25-2007, 09:42 PM

Believe me, those things are hard and do not squeeze evenly. I have enven cut the section out of the door frame of a atruck to try something like this. sometimes it works, sometimes ayou get a mess.

Huck · 02-25-2007, 09:46 PM

Yep, done that--pretty easy on a truck. Unfortunately on a blazer or suburban, you can't get behind the b-pillar as it is a closed box. So just pop some out of a junk yard truck and reuse them.

2nd_wnd · 02-25-2007, 10:09 PM

I can get my hands on some similiar type. im going to take a dremel to some and see if i can get them the same.
I'll let you know if i can make it work, might be worth $10.00 a piece

1BadSS · 02-25-2007, 10:19 PM

Cheapskates the bunch of ya!

02-23-2007, 08:48 PM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Identi Plate? Pop-Rivets Originals Remeber that member that had the factory 'star' type rivets that hold the metal VIN plate to the inside of the drivers door? Does anybody remember who has these? Thanks, 72longbed

02-23-2007, 08:52 PM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Identi Plate? Pop-Rivets Originals Ebay __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

02-23-2007, 09:28 PM	#4
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: Identi Plate? Pop-Rivets Originals saw them on ebay for $48 for two of them. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

02-23-2007, 10:08 PM	#5
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Identi Plate? Pop-Rivets Originals Any idea what to search under on E-bay?

02-24-2007, 01:53 AM	#6
1972CheyenneSuper Registered User Join Date: Feb 2006 Location: ND Posts: 215	Re: Identi Plate? Pop-Rivets Originals They are called rosette rivets.

02-24-2007, 07:50 AM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: Identi Plate? Pop-Rivets Originals 1972CheyenneSuper, that's the ones! Where can I get some? Thanks, Phil aka 72longbed

02-24-2007, 12:23 PM	#8
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Identi Plate? Pop-Rivets Originals The important thing is that the "Rosette Rivets are different than the ones on my 68. The rivets there are more of a standard design rivet, but with a 5 sided head and not starred out like a Rosette.

02-24-2007, 12:55 PM	#9
sixtysevengmc village idiot Join Date: Oct 2006 Location: Barbourville,KY Posts: 178	Re: Identi Plate? Pop-Rivets Originals got Dremel?

02-24-2007, 08:16 PM	#10
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: Identi Plate? Pop-Rivets Originals http://cgi.ebay.com/ebaymotors/GM-RE...QQcmdZViewItem There is the link to the rivets. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

02-24-2007, 11:56 PM	#13
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: Identi Plate? Pop-Rivets Originals For the price of 2 rivets I can buy a whole kit of dremel attachments.

02-25-2007, 11:21 AM	#14
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Identi Plate? Pop-Rivets Originals Look at it this way, you need 4 rivets for the job (to make it look right). The dremel is a great idea, BUT can you do it to make MR. Johnny LAW believe it is the correct process. That is why these sell for so much.

02-25-2007, 12:35 PM	#16
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Identi Plate? Pop-Rivets Originals Just bought 4 sets for some of my projects. One was a cab change from rust and the other is just a full out resto and did not want to leave the plate on for blasting, body work and paint. Well worth the small cost. Their was a guy on here awhile ago selling them for $25ea so $50 for a set of 4 is a good deal. Kevin LFD Inc.

02-25-2007, 09:32 PM	#17
1972CheyenneSuper Registered User Join Date: Feb 2006 Location: ND Posts: 215	Re: Identi Plate? Pop-Rivets Originals .... Last edited by 1972CheyenneSuper; 11-18-2008 at 06:57 PM.

02-25-2007, 09:42 PM	#18
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Identi Plate? Pop-Rivets Originals Believe me, those things are hard and do not squeeze evenly. I have enven cut the section out of the door frame of a atruck to try something like this. sometimes it works, sometimes ayou get a mess.

02-25-2007, 09:46 PM	#19
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: Identi Plate? Pop-Rivets Originals Yep, done that--pretty easy on a truck. Unfortunately on a blazer or suburban, you can't get behind the b-pillar as it is a closed box. So just pop some out of a junk yard truck and reuse them.



Register or Log In To remove these advertisements.

02-25-2007, 10:09 PM	#20
2nd_wnd Registered User Join Date: Feb 2007 Location: Winston Salem, NC Posts: 310	Re: Identi Plate? Pop-Rivets Originals I can get my hands on some similiar type. im going to take a dremel to some and see if i can get them the same. I'll let you know if i can make it work, might be worth $10.00 a piece __________________ 72 LWB

02-25-2007, 10:19 PM	#21
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: Identi Plate? Pop-Rivets Originals Cheapskates the bunch of ya! __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

Register or Log In To remove these advertisements.