shift indicator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brian lotze · 11-24-2002, 07:08 PM

I put in a 700r4 and would like the column shift indicator to show the correct gears. Does anyone make one for this application?
Thanks.

1967 Lwb fleetside, 383 stroker,700r4, a work in progress

*Shane* · 11-24-2002, 07:15 PM

try some of the street rod parts suppliers for this peice....the one name that comes to mind is IDIDIT.

http://www.ididitinc.com/ ...click on ACCESSORIES and then scroll down to the bottom of the page

Sweet Project by the way!!! Looks like a winner in the making!! Keep us posted with pics!

Hooter · 11-24-2002, 08:22 PM

welcome to the board!
Nice truck, same colour as mine to boot!
what are the specs on the motor?

brian lotze · 11-24-2002, 10:34 PM

Thank you Shane, for the link. Looks to be just what I want.
For Hooter , these are the engine specs.

383 cubic inch, balanced rotating assy., Vortec heads with guides cut and LT4 springs, Comp Cams Xtreme Energy 274, Performer intake, Performer 750 carb., HET with accel in cap coil, MSD 6 ignition, headers, correct-o-cap, made for you plug wire holders, Moroso wires,

700R4 built by BowTie Overdrives http://www.700r4.com/

brian lotze · 11-24-2002, 10:36 PM

Thank you Shane, for the link. Looks to be just what I want.
For Hooter and all, these are the engine specs.

383 cubic inch, balanced rotating assy., Vortec heads with guides cut and LT4 springs, Comp Cams Xtreme Energy 274, Performer intake, Performer 750 carb., HET with accel in cap coil, MSD 6 ignition, headers, correct-o-cap, made for you plug wire holders, Moroso wires,

700R4 built by BowTie Overdrives http://www.700r4.com/
2200 stall

brian lotze · 11-24-2002, 10:41 PM

Thank you Shane, for the link. Looks to be just what I want.
For Hooter and all, these are the engine specs.

383 cubic inch, balanced rotating assy., Vortec heads with guides cut and LT4 springs, Comp Cams Xtreme Energy 274, Performer intake, Performer 750 carb., HET with accel in cap coil, MSD 6 ignition, headers, correct-o-cap, made for you plug wire holders, Moroso wires,

700R4 built by BowTie Overdrives http://www.700r4.com/
2200 stall

Has 3"/4" springs only drop on it

I have 15x8 wheels. I want to know what would be some good tires sizes to fill up the wheelwell. I do not want them to stick out past the upper wheelwell edge.

Thanks again

11-24-2002, 07:08 PM	#1
brian lotze Registered User Join Date: Oct 2002 Location: se washington state Posts: 7	shift indicator I put in a 700r4 and would like the column shift indicator to show the correct gears. Does anyone make one for this application? Thanks. 1967 Lwb fleetside, 383 stroker,700r4, a work in progress Attached Images

11-24-2002, 08:22 PM	#3
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	welcome to the board! Nice truck, same colour as mine to boot! what are the specs on the motor? __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

11-24-2002, 10:34 PM	#4
brian lotze Registered User Join Date: Oct 2002 Location: se washington state Posts: 7	Thanks Thank you Shane, for the link. Looks to be just what I want. For Hooter , these are the engine specs. 383 cubic inch, balanced rotating assy., Vortec heads with guides cut and LT4 springs, Comp Cams Xtreme Energy 274, Performer intake, Performer 750 carb., HET with accel in cap coil, MSD 6 ignition, headers, correct-o-cap, made for you plug wire holders, Moroso wires, 700R4 built by BowTie Overdrives http://www.700r4.com/

11-24-2002, 10:36 PM	#5
brian lotze Registered User Join Date: Oct 2002 Location: se washington state Posts: 7	Thanks Thank you Shane, for the link. Looks to be just what I want. For Hooter and all, these are the engine specs. 383 cubic inch, balanced rotating assy., Vortec heads with guides cut and LT4 springs, Comp Cams Xtreme Energy 274, Performer intake, Performer 750 carb., HET with accel in cap coil, MSD 6 ignition, headers, correct-o-cap, made for you plug wire holders, Moroso wires, 700R4 built by BowTie Overdrives http://www.700r4.com/ 2200 stall

11-24-2002, 10:41 PM	#6
brian lotze Registered User Join Date: Oct 2002 Location: se washington state Posts: 7	Thanks Thank you Shane, for the link. Looks to be just what I want. For Hooter and all, these are the engine specs. 383 cubic inch, balanced rotating assy., Vortec heads with guides cut and LT4 springs, Comp Cams Xtreme Energy 274, Performer intake, Performer 750 carb., HET with accel in cap coil, MSD 6 ignition, headers, correct-o-cap, made for you plug wire holders, Moroso wires, 700R4 built by BowTie Overdrives http://www.700r4.com/ 2200 stall Has 3"/4" springs only drop on it I have 15x8 wheels. I want to know what would be some good tires sizes to fill up the wheelwell. I do not want them to stick out past the upper wheelwell edge. Thanks again Attached Images

11-24-2002, 07:15 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	try some of the street rod parts suppliers for this peice....the one name that comes to mind is IDIDIT. http://www.ididitinc.com/ ...click on ACCESSORIES and then scroll down to the bottom of the page Sweet Project by the way!!! Looks like a winner in the making!! Keep us posted with pics!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.