dimmer switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 03-25-2007, 07:37 PM

Question wanting to move my floor dimmer switch. Does all the power for the headlights run thru this switch and it just switches the flow from one wire to the next?

Is it possible to move it to a dash mounted toggle of some kind?

If so what kind of switch would I need?

Thanks

76bonanza · 03-26-2007, 06:48 AM

TTT anyone?

cdowns · 03-26-2007, 07:10 AM

yes it can be done using a double throw toggle switch, quite easy to do actually

Critter · 03-26-2007, 12:31 PM

You mean you've never done the "no headlight stomp" due to a bad dimmer switch? That's when you are driving around at night, step on the switch to swap the beams, and you lose your headlights. You then proceed to stomp around on the d@mn thing like a fool until you get them to come back on!

All kidding aside there are 3 wires running into the switch, one is the power coming in, one is the high beam feed, the other is the low beam feed. Sorry, I have forgotten the color codes for each. So yes, a double throw toggle will work fine, just be careful to get a switch that can handle the proper amperage.

76bonanza · 03-26-2007, 02:52 PM

That is what I was wondering how many amps would you guys say is needed? I see alot of 20 amp switches but not sure if that would be enuf?

Thanks

cdowns · 03-26-2007, 02:59 PM

headlamp circuit uses a 15amp fuse

76bonanza · 03-26-2007, 03:35 PM

never thought about that so 20 will be more than enuf.

72 68 andmore · 03-26-2007, 04:40 PM

I did it, I am paraplegic so I had to, I used a switch I got from Ron Francis wiring...look em up on the net. Tell him what you are doing the guy is cool he will give you instructions and the switch .

PanelDeland · 03-26-2007, 07:24 PM

As long as you're doing it you might as well go ahead and do the relay upgrade.Your lights will be much brighter.

76bonanza · 03-26-2007, 10:50 PM

I was thinking that also If I do the relay upgrade kit. Then am I right in assuming that the dimmer switch no longer will have high amps running thru it and I would be free to use just about any toggle switch I would like?

03-25-2007, 07:37 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	dimmer switch Question wanting to move my floor dimmer switch. Does all the power for the headlights run thru this switch and it just switches the flow from one wire to the next? Is it possible to move it to a dash mounted toggle of some kind? If so what kind of switch would I need? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

03-26-2007, 06:48 AM	#2
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: dimmer switch TTT anyone? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

03-26-2007, 07:10 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: dimmer switch yes it can be done using a double throw toggle switch, quite easy to do actually __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-26-2007, 12:31 PM	#4
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: dimmer switch You mean you've never done the "no headlight stomp" due to a bad dimmer switch? That's when you are driving around at night, step on the switch to swap the beams, and you lose your headlights. You then proceed to stomp around on the d@mn thing like a fool until you get them to come back on! All kidding aside there are 3 wires running into the switch, one is the power coming in, one is the high beam feed, the other is the low beam feed. Sorry, I have forgotten the color codes for each. So yes, a double throw toggle will work fine, just be careful to get a switch that can handle the proper amperage. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

03-26-2007, 02:52 PM	#5
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: dimmer switch That is what I was wondering how many amps would you guys say is needed? I see alot of 20 amp switches but not sure if that would be enuf? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

03-26-2007, 02:59 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: dimmer switch headlamp circuit uses a 15amp fuse __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-26-2007, 03:35 PM	#7
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: dimmer switch never thought about that so 20 will be more than enuf. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

03-26-2007, 04:40 PM	#8
72 68 andmore Registered User Join Date: Sep 2006 Location: Canada Posts: 54	Re: dimmer switch I did it, I am paraplegic so I had to, I used a switch I got from Ron Francis wiring...look em up on the net. Tell him what you are doing the guy is cool he will give you instructions and the switch .

03-26-2007, 07:24 PM	#9
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: dimmer switch As long as you're doing it you might as well go ahead and do the relay upgrade.Your lights will be much brighter. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

03-26-2007, 10:50 PM	#10
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: dimmer switch I was thinking that also If I do the relay upgrade kit. Then am I right in assuming that the dimmer switch no longer will have high amps running thru it and I would be free to use just about any toggle switch I would like? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.