Any Pre-Fab kits or Roll Cage Plans for the 67-72 C-10 cabs?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lil-Joe · 04-16-2007, 07:24 PM

I want to put a rollcage in my Pro-Street 69 C-10. Are there any Plans for a build it yourself cage or one that I can buy?( one that won't cost more than my truck) I don't need "IHRA Specs", just a nice cage to fit the "theme" of my veh. tube [pipe] size and how many Points are up in the air......thats why I need some Ideas, examples and Pics would be nice.

Thanks

Lil-Joe

Psycho71 · 04-16-2007, 09:14 PM

I have yet to see one listed for 67-72. I have seen them for 73+ though. Not sure what the differences are. Call Summit or Jegs and ask them, they both sell one for the 73+ trucks.

Jay

RACINJASON22 · 04-16-2007, 10:05 PM

I haven't seen any in kit form yet either, but IMO the kits never fit as well as custom install either. Unless they have been around the block for awhile.

You best bet Is to contact race car builder and get quotes on having them bend you one up. Then drop off your truck and have them fit it for you. You can have them do the install or take it home after its bent and do it in stages as you build goes along.

You are on the east coast you should have no problem finding a race car fab shop with all the dirt trackas around here. If you do have troble finfding one contact me and I can hook ya up with some only a state away. Good luck with your build RJ22

IGOR · 04-16-2007, 11:02 PM

Right here - pre-fab kit for a 67-72 truck just under the GM cars at top of page...

http://www.swracecars.com/app_listing.asp

Lil-Joe · 04-17-2007, 09:48 AM

Thank's everyone for all your input..............It's been very helpfull. I hope to get some pics up soon, but It's still snowing in the Buffalo-Lackawanna area!!!

04-16-2007, 07:24 PM	#1
Lil-Joe Registered User Join Date: Jan 2007 Location: Lackawanna, New York Posts: 30	Any Pre-Fab kits or Roll Cage Plans for the 67-72 C-10 cabs?? I want to put a rollcage in my Pro-Street 69 C-10. Are there any Plans for a build it yourself cage or one that I can buy?( one that won't cost more than my truck) I don't need "IHRA Specs", just a nice cage to fit the "theme" of my veh. tube [pipe] size and how many Points are up in the air......thats why I need some Ideas, examples and Pics would be nice. Thanks Lil-Joe __________________ 1969 chevy C-20 (soon to be shortened & Tubbed C-10) 1990 Astro AWD 3" Lift w/Laredo tires 10 spkr. 800w system and DVD player for the long trips (got it for free) and been trying very hard to "De Socker-Mom it !

04-16-2007, 09:14 PM	#2
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: Any Pre-Fab kits or Roll Cage Plans for the 67-72 C-10 cabs?? I have yet to see one listed for 67-72. I have seen them for 73+ though. Not sure what the differences are. Call Summit or Jegs and ask them, they both sell one for the 73+ trucks. Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

04-16-2007, 10:05 PM	#3
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: Any Pre-Fab kits or Roll Cage Plans for the 67-72 C-10 cabs?? I haven't seen any in kit form yet either, but IMO the kits never fit as well as custom install either. Unless they have been around the block for awhile. You best bet Is to contact race car builder and get quotes on having them bend you one up. Then drop off your truck and have them fit it for you. You can have them do the install or take it home after its bent and do it in stages as you build goes along. You are on the east coast you should have no problem finding a race car fab shop with all the dirt trackas around here. If you do have troble finfding one contact me and I can hook ya up with some only a state away. Good luck with your build RJ22 __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

04-16-2007, 11:02 PM	#4
IGOR Registered User Join Date: Feb 2003 Location: Damascus, OR Posts: 260	Re: Any Pre-Fab kits or Roll Cage Plans for the 67-72 C-10 cabs?? Right here - pre-fab kit for a 67-72 truck just under the GM cars at top of page... http://www.swracecars.com/app_listing.asp __________________ -Ben 1972 CST K5 - Undergoing frame off, 8.1/4L80E/NP205, 3/4 ton, 8" lift, currently a pile of parts that when assembled resemble a Blazer 1972 K10 - Rust Bucket, TBD 1976 C10 SWB, 350 / T350 My blazer build thread: https://ck5.com/forums/builds/72-k5-...17-update.410/

04-17-2007, 09:48 AM	#5
Lil-Joe Registered User Join Date: Jan 2007 Location: Lackawanna, New York Posts: 30	Re: Any Pre-Fab kits or Roll Cage Plans for the 67-72 C-10 cabs?? Thank's everyone for all your input..............It's been very helpfull. I hope to get some pics up soon, but It's still snowing in the Buffalo-Lackawanna area!!! __________________ 1969 chevy C-20 (soon to be shortened & Tubbed C-10) 1990 Astro AWD 3" Lift w/Laredo tires 10 spkr. 800w system and DVD player for the long trips (got it for free) and been trying very hard to "De Socker-Mom it !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.