radiators widths, hmm

[Fast68Chevy]

ok there are two widths of radiators not only in 67-72 but in 73-80, there is one thats wider, about 28 3/4 or so and a place ot move pass side lower retainer and upper retainers more to the right hand side of truck to use them, the 19" tall ones*
now what happens if I wanted to use a 28 3/4 wide one that i have and i moved the retainers over, what kind of lower hose issues would i run into, i assume this was used only in the BB trucks ?

hmmmm,..


------------------
Randy- Lincoln, IL
randy@ccaonline.com 2177353230
*many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham

current fleet: -71 C-10 350/CH465/3.07- basketcase, #1
-90 Cavalier 2.2L sky blue, a driver
-84 Z28 5.0L/700R4/3.73 daily driver
-84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2
-82 purple Trans Am, project #3
*Paint is overrated*
© RSS Enterprises 2000

[Fast68Chevy]

ttt

[BobM]

Rads for the I6 engines used a shorter rad which used the inside mount. The V8 engines took a longer rad which used the outside mount. Rad hose will depend on engine size, motor mount location, and water pump type.

[Fast68Chevy]

duh for me, thats right... this support is a 250 one, oops, i assumed was V8 cuz thats what im used ot havin, time to break out drill and relocate lower bracket then,

thanks !