question for 69 longhorn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MITCH1914 · 12-03-2002, 11:02 AM

i remember talking to you about mounting some 325/50/15 bfg's drag radials on some 15x10 rallys. you were in the process of changing the offset on you rallys to make the 325's fit.

i finally got a pair of those 325/15 drag radials and i was wondering if you have yours mounted and what they look like on the truck?

thanks

crazy longhorn · 12-03-2002, 11:20 AM

No, I dont have them mounted yet. The tubs are done, & the wheels are setup with 6 1/2" bs, .....but still on the bench(need tires), probably be around tax return time. The spacing on the front side of the wheel is very close to an 8" ralley, so from a side shot they shouldnt be noticeable......crazy AL (69 longhorn)

MITCH1914 · 12-03-2002, 11:45 AM

thanks for the feetback. i am looking forward to mounting mine sometime this week. when i get tem on i'll post a pic.

MITCH1914

crazy longhorn · 12-03-2002, 12:30 PM

Ill be lookin for the pics Mitch. what did you end up with for back spacing?

MITCH1914 · 12-03-2002, 01:31 PM

right now i'll be mounting the 325's on the 15x8's that i have now, but i did order a set of 15x10's this week with a 6 in ch back spacing.

the reason i am mounting them on my 15x8' this week i have a co-worker who has a mustang he thinks he can beat me. so i am going to bust his head this friday after work. he does not know that i have a 125 nos shot.

(the hooser quicktimes that i had are worn out)

MITCH1914

crazy longhorn · 12-03-2002, 01:36 PM

Hehe!......another Poopstang bites the dust!

BUXMAN66 · 12-03-2002, 02:02 PM

killer!roast 'em!!! all ford owners are evil and must die!lol just kiddin'!

12-03-2002, 11:02 AM	#1
MITCH1914 Registered User Join Date: Mar 2001 Location: indianapolis,indiana,usa Posts: 506	question for 69 longhorn i remember talking to you about mounting some 325/50/15 bfg's drag radials on some 15x10 rallys. you were in the process of changing the offset on you rallys to make the 325's fit. i finally got a pair of those 325/15 drag radials and i was wondering if you have yours mounted and what they look like on the truck? thanks

12-03-2002, 11:20 AM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	No, I dont have them mounted yet. The tubs are done, & the wheels are setup with 6 1/2" bs, .....but still on the bench(need tires), probably be around tax return time. The spacing on the front side of the wheel is very close to an 8" ralley, so from a side shot they shouldnt be noticeable......crazy AL (69 longhorn) __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-03-2002, 11:45 AM	#3
MITCH1914 Registered User Join Date: Mar 2001 Location: indianapolis,indiana,usa Posts: 506	thanks thanks for the feetback. i am looking forward to mounting mine sometime this week. when i get tem on i'll post a pic. MITCH1914

12-03-2002, 12:30 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Ill be lookin for the pics Mitch. what did you end up with for back spacing? __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-03-2002, 01:36 PM	#6
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Hehe!......another Poopstang bites the dust! __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-03-2002, 01:31 PM	#5
MITCH1914 Registered User Join Date: Mar 2001 Location: indianapolis,indiana,usa Posts: 506	right now i'll be mounting the 325's on the 15x8's that i have now, but i did order a set of 15x10's this week with a 6 in ch back spacing. the reason i am mounting them on my 15x8' this week i have a co-worker who has a mustang he thinks he can beat me. so i am going to bust his head this friday after work. he does not know that i have a 125 nos shot. (the hooser quicktimes that i had are worn out) MITCH1914

12-03-2002, 02:02 PM	#7
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	killer!roast 'em!!! all ford owners are evil and must die!lol just kiddin'! __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.