My blazer pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HAVA79 · 05-20-2007, 01:33 PM

I hope that these post ok.

HAVA79 · 05-20-2007, 01:38 PM

More pics. Try to imagine the blaz a bright yellow(maybe next fall). I still have to add the new air ride management and finish some firewall work. Then lots or odds and ends...........jesse

HAVA79 · 05-20-2007, 01:42 PM

Thanks for all the help in getting the blaz this far. I read these forums regularly

HAVA79 · 05-20-2007, 01:46 PM

still more pics...........

HAVA79 · 05-20-2007, 01:50 PM

Last set.........for now

los-lowrider · 05-20-2007, 02:04 PM

Sweeeet one you got there!

Pyrotechnic · 05-20-2007, 02:20 PM

Lookin' CLEAN!

What serpentine setup is that? I've never seen one with the A/C compressor on the passenger side like that.

bigblock79 · 05-20-2007, 02:26 PM

nice truck

boatpuller · 05-20-2007, 02:30 PM

that is one fine blazer........how'd a/c turn out,happy with it?

los-lowrider · 05-20-2007, 02:35 PM

How much did you drop it? And what size are the wheels?

benoit454 · 05-20-2007, 02:58 PM

Nice ride.

What kind of drop does it have, and is that a vintage air setup or what?

HAVA79 · 05-20-2007, 03:05 PM

serp setup is from gm performance(all new) you can get the same stuff from early to mid 90's camaro I think. Others will have way more info. the kit from gm ram me about 750.00$ all new and every nut and bolt to complete(reverse water pump, power steering pump, alt., air compressor, idler). Boatpuller, I love the A/C from vintage

, It is above my expectations!!(yet pricey

)

The tires are 245/40/20 front and 295/40/20 very pleased here also, next fronts might be 245/50/20. Just a little more sidewall, this is driven as much as possible

HAVA79 · 05-20-2007, 03:11 PM

Drop: all airride, four-link in the rear with Blackbirds rear disk conversion(highly recommend) standard bags and plates up front. The air bottle will be coming out of the rear and in goes the new airride electrics with a 5 gal. tank and two compressors with valves and pressure solenoids. I just dont trust the 10 pound bottle, no way to generate your own air if you have a problem.(tried to go simple and cheap, just dont trust it on a 5 hour drive to san diego

)

alextreme76 · 05-20-2007, 04:08 PM

gosh, there are so many AZ members on this forum!

cochino12 · 05-20-2007, 08:36 PM

Very nice Blazer, would you mind taking a closer pic of the roll pan? I'm curious how far the tank hangs below the rollpan. Thanks and the seats look great, do you mind me asking what it cost to get the rear recovered?

Eyegore · 05-20-2007, 08:52 PM

Very nice.

HAVA79 · 05-20-2007, 08:55 PM

rollpan was on the blaz when i purchased it. the tank hangs down pretty far

. I am still trying to decide to put a bumper back on or not. I need a trailer(hidden) hitch to tow my boat and I think the stock hitches will hang down way too far

. I like the pan so will try to have a custom hitch built for it.

As far as the rear seat, I had the seat done and the carbon fiber looking side panels, along with the carpet glued to the mat over the dynamat at the same time. I am not sure about just the seat price, I do know that using GM material is more than just about anything else

. But I wanted it to match the fronts...........jesse

gchemist · 05-20-2007, 09:31 PM

Nice setup. What type crate motor is that? How did you route the heater hose? I'm trying to work mine out. Does your water pump have two ports or one port? I'm adding a similiar serpentine belt to my 83.

HAVA79 · 05-20-2007, 10:02 PM

Motor is a zz4, the water pump is a reverse rotation short for the serp setup. I believe it only has one port for the heater hose other heater hose is on the intake. Do a search for Gilbert cheverolet, they used to be named sallee chevy, very good info on the performance parts stuff.

boxrodz · 05-21-2007, 12:36 AM

Good looking Blazer, inside and out.

BTW, what's sitting on the roof?

gchemist · 05-21-2007, 08:57 AM

Which hose did you use as a supply? Return?
Does the bracket to the passenger side head only use two bolts?

Ric83 · 05-21-2007, 01:20 PM

Sweet looking blazer!! Good idea on the front tire meat. I was looking at the pix saying " that would look sweeter with more meat on the front wheels" lol

69BBsuburban · 05-21-2007, 01:47 PM

Malo83 · 05-21-2007, 04:36 PM

Very,Very Nice

, love that smooth clean look, what color is she?
John

HAVA79 · 05-21-2007, 06:41 PM

Malo- she is a $h!!tty champange color and a 20 footer at that

, the paint is horrible but the body is rust free and I have dynamated the whole interior. she will be a rich bright yellow hopefully soon, just trying to get her just right before teardown for paint. Besides I need a little seat time, tired of just working on her

.

05-20-2007, 01:33 PM	#1
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	My blazer pics I hope that these post ok. Attached Images

05-20-2007, 01:38 PM	#2
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics More pics. Try to imagine the blaz a bright yellow(maybe next fall). I still have to add the new air ride management and finish some firewall work. Then lots or odds and ends...........jesse Attached Images

05-20-2007, 01:42 PM	#3
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics Thanks for all the help in getting the blaz this far. I read these forums regularly Attached Images

05-20-2007, 01:46 PM	#4
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics still more pics........... Attached Images

05-20-2007, 01:50 PM	#5
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics Last set.........for now Attached Images

05-20-2007, 02:04 PM	#6
los-lowrider Registered User Join Date: Feb 2005 Location: Germany, Krefeld Posts: 180	Re: My blazer pics Sweeeet one you got there! __________________ Best Regards from Germany! *www.los-lowrider.com*

05-20-2007, 02:20 PM	#7
Pyrotechnic Registered User Join Date: Feb 2007 Location: Austin, TX Posts: 3,930	Re: My blazer pics Lookin' CLEAN! What serpentine setup is that? I've never seen one with the A/C compressor on the passenger side like that.

05-20-2007, 02:26 PM	#8
bigblock79 67 Chevy Stepside Join Date: Mar 2007 Location: Jonesville NC Posts: 836	Re: My blazer pics nice truck __________________ 1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11

05-20-2007, 02:30 PM	#9
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: My blazer pics that is one fine blazer........how'd a/c turn out,happy with it? Attached Images __________________ " Never look up a dead dogs butt."

05-20-2007, 02:35 PM	#10
los-lowrider Registered User Join Date: Feb 2005 Location: Germany, Krefeld Posts: 180	Re: My blazer pics How much did you drop it? And what size are the wheels? __________________ Best Regards from Germany! *www.los-lowrider.com*

05-20-2007, 02:58 PM	#11
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: My blazer pics Nice ride. What kind of drop does it have, and is that a vintage air setup or what? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

05-20-2007, 03:05 PM	#12
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics serp setup is from gm performance(all new) you can get the same stuff from early to mid 90's camaro I think. Others will have way more info. the kit from gm ram me about 750.00$ all new and every nut and bolt to complete(reverse water pump, power steering pump, alt., air compressor, idler). Boatpuller, I love the A/C from vintage , It is above my expectations!!(yet pricey ) The tires are 245/40/20 front and 295/40/20 very pleased here also, next fronts might be 245/50/20. Just a little more sidewall, this is driven as much as possible

05-20-2007, 03:11 PM	#13
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics Drop: all airride, four-link in the rear with Blackbirds rear disk conversion(highly recommend) standard bags and plates up front. The air bottle will be coming out of the rear and in goes the new airride electrics with a 5 gal. tank and two compressors with valves and pressure solenoids. I just dont trust the 10 pound bottle, no way to generate your own air if you have a problem.(tried to go simple and cheap, just dont trust it on a 5 hour drive to san diego )

05-20-2007, 04:08 PM	#14
alextreme76 Registered User Join Date: Apr 2007 Location: Arizona Posts: 45	Re: My blazer pics gosh, there are so many AZ members on this forum! __________________ '86 Longbed 305 quasi-rat-rod father/son project

05-20-2007, 08:36 PM	#15
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: My blazer pics Very nice Blazer, would you mind taking a closer pic of the roll pan? I'm curious how far the tank hangs below the rollpan. Thanks and the seats look great, do you mind me asking what it cost to get the rear recovered? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 05-20-2007 at 08:38 PM.



Register or Log In To remove these advertisements.

05-20-2007, 08:52 PM	#16
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: My blazer pics Very nice. __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

05-20-2007, 08:55 PM	#17
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics rollpan was on the blaz when i purchased it. the tank hangs down pretty far . I am still trying to decide to put a bumper back on or not. I need a trailer(hidden) hitch to tow my boat and I think the stock hitches will hang down way too far . I like the pan so will try to have a custom hitch built for it. As far as the rear seat, I had the seat done and the carbon fiber looking side panels, along with the carpet glued to the mat over the dynamat at the same time. I am not sure about just the seat price, I do know that using GM material is more than just about anything else . But I wanted it to match the fronts...........jesse

05-20-2007, 09:31 PM	#18
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: My blazer pics Nice setup. What type crate motor is that? How did you route the heater hose? I'm trying to work mine out. Does your water pump have two ports or one port? I'm adding a similiar serpentine belt to my 83. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-20-2007, 10:02 PM	#19
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics Motor is a zz4, the water pump is a reverse rotation short for the serp setup. I believe it only has one port for the heater hose other heater hose is on the intake. Do a search for Gilbert cheverolet, they used to be named sallee chevy, very good info on the performance parts stuff.

05-21-2007, 12:36 AM	#20
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Re: My blazer pics Good looking Blazer, inside and out. BTW, what's sitting on the roof? __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...

05-21-2007, 08:57 AM	#21
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: My blazer pics Which hose did you use as a supply? Return? Does the bracket to the passenger side head only use two bolts? __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

05-21-2007, 01:20 PM	#22
Ric83 Registered User Join Date: Jan 2003 Location: Austin, TX Posts: 824	Re: My blazer pics Sweet looking blazer!! Good idea on the front tire meat. I was looking at the pix saying " that would look sweeter with more meat on the front wheels" lol __________________ Ric '83 Silverado SWB Fleetside Here she is

05-21-2007, 01:47 PM	#23
69BBsuburban Right in front of you. Join Date: Jan 2006 Location: Roy, Wa Posts: 584	Re: My blazer pics __________________ Pinstriping by Josh '78 Chevy Silverado SWB (lowered, 454) '90 Chevy Sport Truck '68 Dodge Charger R/T 1930 Ford Model A

05-21-2007, 04:36 PM	#24
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: My blazer pics Very,Very Nice , love that smooth clean look, what color is she? John

05-21-2007, 06:41 PM	#25
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Re: My blazer pics Malo- she is a $h!!tty champange color and a 20 footer at that , the paint is horrible but the body is rust free and I have dynamated the whole interior. she will be a rich bright yellow hopefully soon, just trying to get her just right before teardown for paint. Besides I need a little seat time, tired of just working on her .

Register or Log In To remove these advertisements.