May 2007 - TOTM- But it Keeps on Running - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 05-26-2007, 07:35 PM

Entry #1
1969k10stepside's
1979 K10 Longbed

Worn 350 running on about 5 of its 8 cylinders.Motor is all stock.Rebuilt TH350 tranny,rebuilt NP203 T-case.Stock 12 bolt Corp. rear axle and 10 bolt Corp. front axle.4" Rancho Lift kit and worn and weather cracked 33" Wild Country tires.

**Palf70Step** · 05-26-2007, 07:49 PM

Entry #2

heavy71chevy's
1971 Custom/10

Green, Black ,rust and primer lol the bed is completly rusted out. I have a peice of plate steel thats woodscrewed down to cover the swiss cheese bed floor..both rockers had metal screen for windows rivited down and kitty haired over by the PO...the whole truck is mostly all had peices of everything bondoed up...there is no weather stripping on both the doors is non existent and the top of the windsheild frame is rusted thru in at least ten places..i have three dry rotted tires and one new kelly safari for one rim...the tailgate is rusted out completly also..every time it rains its like a lake inside..there no seat cover at all..its just foam..the headlights dance arund the road at night wildly due to a smashed up and cracked up grill shell...and the best part...i drive it 70 miles a day every day! lol its my only mode of transportation

**Palf70Step** · 05-26-2007, 07:52 PM

Entry #3
Srubydo1986's
1986 Chevy Silverado Longbed

2 different shades of brown. She's had a new engine and tranny installed. Every time she starts she make a real nice grinding noise (flywheel broken but still drivable) Bent rear bumper and some rust at the cab corners.

**Palf70Step** · 05-26-2007, 07:57 PM

Entry #4
hewlett2002000's
1966 Chevy LWB Fleetside

350, 4-speed standard, edelbrock performer intake, holley 600cfm

**Palf70Step** · 05-26-2007, 08:06 PM

Entry #5
Micky_D's
1980 GMC K15 Custom Deluxe

336,000 miles on the original engine. Tranny's been rebuilt, but that's it. The driver's side tank is rusted out, so you can only use the passenger's side 14 gallon one.

It starts every time I ask it to.
It goes wherever I point it.
It hauls whatever I throw in it.
It survived a side swipe by a Jeep Liberty without even a noticeably dent.
It's great for knocking over trees that blow over the wrong way when you're cutting them down.
It'll idle for 36 hours without even blinking keeping the battery charged so I can use my inverter when the power goes out to keep the furnace running.

It's NEVER stranded me. And some of the crap I've put it through, it should have told me to **** off years ago and left my sorry butt out in the middle of nowhere!! Even after blowing through a 6 foot snow drift to clear the driveway!!

**Palf70Step** · 05-26-2007, 08:11 PM

Entry #6
GREASEMONKEY72's
1972 Chevy Custom/10 LWB

350/th350 repainted by the po but its on waaay to thick and flaking off in spots, over spray everywhere both paint and primer, theres dings everywhere, left fender is dented to much to be fixed i think, little half moon dent in the top off the gate and another small one in the middle, left quarter under the side marker light is pushed in a bit, i got some out but not all, right rear wheel well has a tear in it in front of the tire and the bottom corner behind it was pushed up and in, i managed to pull that out, didn't have the support bar for that side so i had to make one, i had to weld all the bolts to the rear bumper cause the holes are rounded out, theres varies holes drilled in the bed floor, little bit of rust in the bottom of both kick panels, bucket seats out of something that are welding to square tubing which in turn is welding to the cab floor and the drivers seat is about 2in to far to the left and has a small 1/4in burn hole, only had the drivers seat belt when i got it so i put some belts out of jc whitney in it, the wiper sprayers dont work so i took them out and the resivour also, the front bumper is rust pitted like crazy and its so bad that theres a nice shiny spot where the plate used to be before i took it off, the grill is obviously not the stock one, but a 69-70 grill and bumper

**Palf70Step** · 05-26-2007, 08:15 PM

Entry #7
GMan69's
1969 Chevy C10 SWB Fleet

355 with an Edelbrock carb, RPM air gap intake, mild Isky solid lifter cam, Cloyes hex-a-just timing set, Z/28 oil pan with windage tray, Thorley tri-Y headers, AFR 190 heads (no longer produced) Comp pro magnum roller rockers, Spal electric fans, Putter's Custom Concepts intermittent wiper switch, Putter's Custom Concepts in-cab hood release, tilt column, '99 Suburban 2nd row seat, 3-point belts, compass/temp/auto-dim mirror, working factory AM radio with Audiovox FM converter.

Critical needs: BRAKES!!! (non-power drums just don't do too good), outer rockers, kick panels, radiator core support.

**Palf70Step** · 05-26-2007, 08:18 PM

Entry #8
Shaneschevys'
1972 Chevy C10 SWB Fleet

lowered 2 1/2 front & 4 rear. Vortec 350 with a 4l60e trans. I removed the turn signals out of the grill & put the 72 bumper back on. I wanted to leave a little of the 72 look on the truck

**Palf70Step** · 05-26-2007, 08:20 PM

Entry #9
Putter's
1969 Chevy C10 SWB Stepside

Engine is a 355 with T350
Van tilt.
Comp/Temp mirror from Caddy Escalade.
Suburban 2nd row leather seats.
Blazer tank with side marker filler.
DynaMat lined cab.
Stealth latches and hidden Nissan hangers on tailgate (no chains)
In-Cab hood release.
One-off custom built roll pan with LED taillights.
S-10 washer pump conversion for windshield.
Adjustable height Silverado shoulder seat belts.
Duel electric fans for cooling.

**Palf70Step** · 05-26-2007, 08:24 PM

Entry #10
jsbgump's
1968 Chevy C10 SWB Stepside

ECE 2.5/4 lowering kit with adjustable panhard and shock relocaters. 350/T350 Edelbrock carb & intake with a small cam. 3.73 posi rear

**Palf70Step** · 05-26-2007, 08:28 PM

Entry #11
Royo's
1969 Chevy LWB Fleet
454/700/12 bolt 3.73. ECE 2.5" drop spindles & cut coil in front and 6" in the back

**Palf70Step** · 05-26-2007, 08:32 PM

Entry #12
Igotachevyor2's
1958 Chevy Apache 3100

350 4 bolt motor bored .060
World Products Sportsman-II Heads
Edelbrock Performer Air Gap Intake
Hooker Headers
Holley carb
Cloyes noisy gear set
Crane Cams Energizer 274 HO6
Electric Fan
K&N Air Filter
POS dual exhaust
3 on the tree trans
stock rear and brakes
stock interior except for the pos bucket seats

16x10 American Racing wheels - rear Goodyear 285/60/16s, front Goodyear 225/60/16s
Strategically placed rust holes for weight reduction.
She fires up every time i drive it to work a few times a month to turn a few heads im not sure if it is the different colors they like or the loud exhaust maybe even the whining coming from the timing set.

**Palf70Step** · 05-26-2007, 08:36 PM

Entry #13
killthewabbit's
1978 Chevy C10 SWB Stepside

Vortec 350/T350. Mismatched tires, 3/4" plywood for bed wood, and the all important Indian Blanket $20.00 seat cover. There are rust holes in the fender, cab corners, and inner fenders. It looks like the tailgate metal actually separated from the latch and the PO booger-welded it back together. There's a cut down, bent-up, rusty-a$ed step bumper of unknown vintage booger-welded to the frame. I did manage to get all the leaks fixed except for a nasty steering box leak that made the side of the truck look like some kind of a leopard, and the bottom of the driver's inner fender look like I drove through a tar pit. If you look closely at the carpet, there's a giant oil stain where the pressure gauge line popped off one day and sprayed the carpet with really hot oil.

**Palf70Step** · 05-26-2007, 08:38 PM

Entry #14
Mrbosum1's
1968 Chevy C10 SWB Stepside

Inline 6, with a 4 speed tranny on the floor

**Palf70Step** · 05-26-2007, 08:45 PM

Entry #15
panhandler62's
1968 Chevy C20 LWB Fleet

jsbgump · 05-26-2007, 09:13 PM

well my vote is in

bigblock79 · 05-26-2007, 10:44 PM

my vote is in

dan42 · 05-27-2007, 02:08 AM

My vote is in -

jamis · 05-27-2007, 06:22 PM

This was a hard on to vote on.

**Canadian694x4** · 05-27-2007, 09:31 PM

Tough one...All worthy candiates!

el-cid · 05-27-2007, 11:42 PM

You gotta' love real world trucks

.

GREASEMONKEY72 · 05-28-2007, 04:40 AM

i dont know if i want to win this one or not

doesnt look like i will anyway though

hewlett2002000 · 05-28-2007, 09:24 AM

"This was a hard on to vote on." ? lol

jamis · 05-28-2007, 01:45 PM

Quote:

Originally Posted by hewlett2002000

"This was a hard on to vote on." ? lol

My bad LOL

It was a hard one to vote on LOL

GREASEMONKEY72 · 05-29-2007, 06:10 AM

Quote:

Originally Posted by jamis

My bad LOL

It was a hard one to vote on LOL

becarefull

View Poll Results: May 2007 TOTM- But it Keeps on Running
1969k10stepside - 1979 K10 Longbed	16	15.24%
heavy71chevy - 1971 Custom/10	5	4.76%
Scrubydo1986 - 1986 Silverado Longbed	1	0.95%
hewlett2002000 - 1966 Chevy LWB Fleet	7	6.67%
Micky_D - 1980 GMC K15 Custom Deluce	20	19.05%
GREASEMONKEY72 - 1972 Custom/10 Longbed	7	6.67%
GMan69 - 1969 Chevy C10 SWB Fleet	8	7.62%
Shaneschevys - 1972 Chevy C10 SWB Fleet	5	4.76%
Putter - 1969 Chevy C10 SWB Stepside	5	4.76%
jsbgump - 1968 Chevy C10 SWB Stepside	6	5.71%
Royo - 1969 Chevy C10 LWB	3	2.86%
Igotachevyor2 - 1958 Chevy Apache 3100	10	9.52%
killthewabbit - 1978 Chevy C10 SWB Stepside	6	5.71%
Mrbosum1 - 1968 Chevy C10 SWB Stepside	3	2.86%
panhandler62 - 1968 Chevy C20 LWB Fleet	3	2.86%
Voters: 105. You may not vote on this poll

05-26-2007, 09:13 PM	#16
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: May 2007 - TOTM- But it Keeps on Running well my vote is in __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

05-26-2007, 10:44 PM	#17
bigblock79 67 Chevy Stepside Join Date: Mar 2007 Location: Jonesville NC Posts: 836	Re: May 2007 - TOTM- But it Keeps on Running my vote is in __________________ 1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11

05-27-2007, 02:08 AM	#18
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: May 2007 - TOTM- But it Keeps on Running My vote is in - __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

05-27-2007, 06:22 PM	#19
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	Re: May 2007 - TOTM- But it Keeps on Running This was a hard on to vote on. __________________ F.A.S.T. President and Founder Fabricators for the Advancement of Sawsall Technology "A fear of the Sawsall is a sign of retarded sexual and emotional maturity." ~Sigmund Freud, "General Introduction to Psychoanalysis"

05-26-2007, 07:35 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	May 2007 - TOTM- But it Keeps on Running Entry #1 1969k10stepside's 1979 K10 Longbed Worn 350 running on about 5 of its 8 cylinders.Motor is all stock.Rebuilt TH350 tranny,rebuilt NP203 T-case.Stock 12 bolt Corp. rear axle and 10 bolt Corp. front axle.4" Rancho Lift kit and worn and weather cracked 33" Wild Country tires. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 05-26-2007 at 07:58 PM.

05-26-2007, 07:49 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #2 heavy71chevy's 1971 Custom/10 Green, Black ,rust and primer lol the bed is completly rusted out. I have a peice of plate steel thats woodscrewed down to cover the swiss cheese bed floor..both rockers had metal screen for windows rivited down and kitty haired over by the PO...the whole truck is mostly all had peices of everything bondoed up...there is no weather stripping on both the doors is non existent and the top of the windsheild frame is rusted thru in at least ten places..i have three dry rotted tires and one new kelly safari for one rim...the tailgate is rusted out completly also..every time it rains its like a lake inside..there no seat cover at all..its just foam..the headlights dance arund the road at night wildly due to a smashed up and cracked up grill shell...and the best part...i drive it 70 miles a day every day! lol its my only mode of transportation Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 05-26-2007 at 07:59 PM.

05-26-2007, 07:52 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #3 Srubydo1986's 1986 Chevy Silverado Longbed 2 different shades of brown. She's had a new engine and tranny installed. Every time she starts she make a real nice grinding noise (flywheel broken but still drivable) Bent rear bumper and some rust at the cab corners. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 05-26-2007 at 08:00 PM.

05-26-2007, 07:57 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #4 hewlett2002000's 1966 Chevy LWB Fleetside 350, 4-speed standard, edelbrock performer intake, holley 600cfm Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:06 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #5 Micky_D's 1980 GMC K15 Custom Deluxe 336,000 miles on the original engine. Tranny's been rebuilt, but that's it. The driver's side tank is rusted out, so you can only use the passenger's side 14 gallon one. It starts every time I ask it to. It goes wherever I point it. It hauls whatever I throw in it. It survived a side swipe by a Jeep Liberty without even a noticeably dent. It's great for knocking over trees that blow over the wrong way when you're cutting them down. It'll idle for 36 hours without even blinking keeping the battery charged so I can use my inverter when the power goes out to keep the furnace running. It's NEVER stranded me. And some of the crap I've put it through, it should have told me to ** off years ago and left my sorry butt out in the middle of nowhere!! Even after blowing through a 6 foot snow drift to clear the driveway!! Attached Images __________________ Bill** 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:11 PM	#6
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #6 GREASEMONKEY72's 1972 Chevy Custom/10 LWB 350/th350 repainted by the po but its on waaay to thick and flaking off in spots, over spray everywhere both paint and primer, theres dings everywhere, left fender is dented to much to be fixed i think, little half moon dent in the top off the gate and another small one in the middle, left quarter under the side marker light is pushed in a bit, i got some out but not all, right rear wheel well has a tear in it in front of the tire and the bottom corner behind it was pushed up and in, i managed to pull that out, didn't have the support bar for that side so i had to make one, i had to weld all the bolts to the rear bumper cause the holes are rounded out, theres varies holes drilled in the bed floor, little bit of rust in the bottom of both kick panels, bucket seats out of something that are welding to square tubing which in turn is welding to the cab floor and the drivers seat is about 2in to far to the left and has a small 1/4in burn hole, only had the drivers seat belt when i got it so i put some belts out of jc whitney in it, the wiper sprayers dont work so i took them out and the resivour also, the front bumper is rust pitted like crazy and its so bad that theres a nice shiny spot where the plate used to be before i took it off, the grill is obviously not the stock one, but a 69-70 grill and bumper Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:15 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #7 GMan69's 1969 Chevy C10 SWB Fleet 355 with an Edelbrock carb, RPM air gap intake, mild Isky solid lifter cam, Cloyes hex-a-just timing set, Z/28 oil pan with windage tray, Thorley tri-Y headers, AFR 190 heads (no longer produced) Comp pro magnum roller rockers, Spal electric fans, Putter's Custom Concepts intermittent wiper switch, Putter's Custom Concepts in-cab hood release, tilt column, '99 Suburban 2nd row seat, 3-point belts, compass/temp/auto-dim mirror, working factory AM radio with Audiovox FM converter. Critical needs: BRAKES!!! (non-power drums just don't do too good), outer rockers, kick panels, radiator core support. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:18 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #8 Shaneschevys' 1972 Chevy C10 SWB Fleet lowered 2 1/2 front & 4 rear. Vortec 350 with a 4l60e trans. I removed the turn signals out of the grill & put the 72 bumper back on. I wanted to leave a little of the 72 look on the truck Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:20 PM	#9
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #9 Putter's 1969 Chevy C10 SWB Stepside Engine is a 355 with T350 Van tilt. Comp/Temp mirror from Caddy Escalade. Suburban 2nd row leather seats. Blazer tank with side marker filler. DynaMat lined cab. Stealth latches and hidden Nissan hangers on tailgate (no chains) In-Cab hood release. One-off custom built roll pan with LED taillights. S-10 washer pump conversion for windshield. Adjustable height Silverado shoulder seat belts. Duel electric fans for cooling. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:24 PM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #10 jsbgump's 1968 Chevy C10 SWB Stepside ECE 2.5/4 lowering kit with adjustable panhard and shock relocaters. 350/T350 Edelbrock carb & intake with a small cam. 3.73 posi rear Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

05-26-2007, 08:28 PM	#11
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #11 Royo's 1969 Chevy LWB Fleet 454/700/12 bolt 3.73. ECE 2.5" drop spindles & cut coil in front and 6" in the back Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:32 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #12 Igotachevyor2's 1958 Chevy Apache 3100 350 4 bolt motor bored .060 World Products Sportsman-II Heads Edelbrock Performer Air Gap Intake Hooker Headers Holley carb Cloyes noisy gear set Crane Cams Energizer 274 HO6 Electric Fan K&N Air Filter POS dual exhaust 3 on the tree trans stock rear and brakes stock interior except for the pos bucket seats 16x10 American Racing wheels - rear Goodyear 285/60/16s, front Goodyear 225/60/16s Strategically placed rust holes for weight reduction. She fires up every time i drive it to work a few times a month to turn a few heads im not sure if it is the different colors they like or the loud exhaust maybe even the whining coming from the timing set. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:36 PM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #13 killthewabbit's 1978 Chevy C10 SWB Stepside Vortec 350/T350. Mismatched tires, 3/4" plywood for bed wood, and the all important Indian Blanket $20.00 seat cover. There are rust holes in the fender, cab corners, and inner fenders. It looks like the tailgate metal actually separated from the latch and the PO booger-welded it back together. There's a cut down, bent-up, rusty-a$ed step bumper of unknown vintage booger-welded to the frame. I did manage to get all the leaks fixed except for a nasty steering box leak that made the side of the truck look like some kind of a leopard, and the bottom of the driver's inner fender look like I drove through a tar pit. If you look closely at the carpet, there's a giant oil stain where the pressure gauge line popped off one day and sprayed the carpet with really hot oil. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:38 PM	#14
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #14 Mrbosum1's 1968 Chevy C10 SWB Stepside Inline 6, with a 4 speed tranny on the floor Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-26-2007, 08:45 PM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: May 2007 - TOTM- But it Keeps on Running Entry #15 panhandler62's 1968 Chevy C20 LWB Fleet Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-27-2007, 09:31 PM	#20
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,308	Re: May 2007 - TOTM- But it Keeps on Running Tough one...All worthy candiates! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

05-27-2007, 11:42 PM	#21
el-cid Registered User Join Date: May 2007 Location: Anaconda, MT, USA Posts: 5	Re: May 2007 - TOTM- But it Keeps on Running You gotta' love real world trucks .

05-28-2007, 04:40 AM	#22
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: May 2007 - TOTM- But it Keeps on Running i dont know if i want to win this one or not doesnt look like i will anyway though __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

05-28-2007, 09:24 AM	#23
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: May 2007 - TOTM- But it Keeps on Running "This was a hard on to vote on." ? lol __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

Register or Log In To remove these advertisements.