15 Trucks and Tons of Parts FOR SALE

[4x4titanium69]

Originally Posted by 1968SWBBigBlock

I am still looking for someone to buy this as a lot!!!!!
Any takers????

I am interested in a tach speed warning cluster and big block brackets thanks

[lpaine]

Any one of those fan shrouds a 4x4 type? If so, I would be interested in addition to my previous request. Thanks, Lew

[xshadow]

I'm interested in a long wide bed I could use a whole bed OR just bedsides.
would be happy even with one bedside.

i'm also interested in doors, speedo cable, pass side fender if you have a rust free one

[Driver177]

Put me in line if the lot gets broken up.. looking for an original 67 250 I-6 to rebuild .. have one?

[babyJay]

If I check my numbers and find I won the lottery last night I'll take the lot. Otherwise Interested in truck #12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side...If you decide to break 'em up.

[casterbuster]

Put me inline for a drivers side step fender with no wheel dish.

[500dana]

Interested in Custom Camper Doors/Emblems? dlelande@yahoo.com
Thanks!

[1968SWBBigBlock]

ohnojoe you are in line
Can you put me in line for the following;
A/C parts, diverter box, condenser, accumulator, accumulator bracket,accumulator hoses, the brackets and other little stuff
72 Sububan doors all 5, two front, one right hand rear and two barn doors, depending on condition
72 Grill inner and outer
Fenders
S-10 wiring harness (1995) including the under dash puter
tallhoedude you are in line
Please Put Me In Line For A Tilt Column,any Windshield Frames For Blazers
64GMC - PM sent
4x4Ti69 you are in line
am interested in a tach speed warning cluster and big block brackets thanks

[1968SWBBigBlock]

lpaine - I will find out _ I do know that thier is not a lot of 4x4 stuff
driver177 - you are in line - I do know we have a couple of 6cyl engs - unsure of the date codes
Babyjay - did you win the lottery? you are in line
Interested in truck #12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side
casterbuster you are in line Put me inline for a drivers side step fender with no wheel dish
500dana you are in line Custom Camper Doors/Emblems

[Parkerkl]

I am interested in a tach speed warning cluster and an am/fm radio. Like to get in line if you part out the lot.
thanks
ken

[68 P.O.S.]

I would like to get in line for a clean pair of 68 Chevy front fenders and a pair of 72 doors.

[bean]

how much for a passenger side rear fender and bedside for a 69 chevy short stepside?

[gregbr]

When will you decide to break it up? I need a really nice fleet side tailgate for my 70 GMC...perfer GMC with trim holes, but Chevy will work. Can Paypal ASAP, need a gate. Greg

[500dana]

Let me know when ready to sell! Thanks

[babyJay]

Originally Posted by 1968SWBBigBlock

Babyjay - did you win the lottery? you are in line

NO! Darn the luck! Tryin again tonight. Thanks!

[winston]

Put me in line for a set of rust free doors. Also a rust free cab if you have one. thanks winston.

[IvelDesigns]

i'll jump in line with everyone else on the following:

68 front fenders - inner and outer
67-68 core support
12 bolt posi - center section only
Tach Dash
Tilt Column

how much for these shipped to 50624?

It might not be a bad idea for you to split this lot up into 8-10 smaller lots, each in the 3-5k range and sell the trucks on their own. Hopefully you have a some people interested in the whole lot. There are certainly a couple bucks to be made here. That, and you have about 50 customers in line for them. Talk about turn key.

[Thealien]

I would be interested in a 72 tilt column

A set of GMC Jimmy trim rings/center caps also 72

a tach dash

front buckets

console

If there are any of these parts available and they don't sell as a lot.

Thanks
Mark

[lks dcvn]

If it gets parted out - let me know...add me to the line.

I am in Toledo, Ohio and can drive down to grab some rust free blazer doors and some inner fenders out of the pile.

Thanks-

Tom

[jfalesi]

I am interested in the NOS '70 grille. Please put me in line.

Thanks,

-Jamie

[my67c20]

Would like to grab me one of those 67-72 tailgates.

[slamin69]

Originally Posted by Driver177

Put me in line if the lot gets broken up.. looking for an original 67 250 I-6 to rebuild .. have one?

I have a 6 out of a 67 camaro with low miles Barry 303-895-7221

[slamin69]

Originally Posted by 1968SWBBigBlock

http://s162.photobucket.com/albums/t...72chevytrucks/
67-72 Chevy Truck Parts & Complete Trucks once in a lifetime

Up for sale today we have an entire warehouse full of trucks & Parts.
We have a selection of parts that have been pulled off of trucks since 1970.
Tons of the good stuff and tons of the small parts that are not made and tons driver/rough quality material.
Reserve is set at a conservative estimate of what the complete trucks would sell for on the open market. The balance of the parts could all be gravy. Again this is a conservative reserve.
Trucks and parts can be viewed by appointment only. They are located in a secure guarded location. Walk thrus are encouraged; we want you to understand what your money will be buying. This is truly a once in a lifetime opportunity for the hottest truck on the market.
I will start with the trucks and rolling chassis and finish off with estimates on the parts.
Pictures are attached; more can be taken as needed. Please ask your questions early and make your appointment for a personal walk thru

1. 1970 Longhorn Factory big block truck, motor is out and needs rebuilt, Montana truck, very solid, tool box door in good shape, Air Conditioning, Automatic T400 transmission, Big Block
2. 1968, 37,000 miles, ¾ Ton custom Camper, original bed has been off for many years since this had a camper on the chassis, very nice bed, surface rust other wise very nice, great cab
3. 68 LWB ¾ ton 327 automatic, engine is out of the truck, Oregon and North Carolina truck, never in salt, exceptional
4. 1968 1 ton flat bed, Okalahoma truck, 67,000 miles 327 4 speed aftermarket air, used to service horses, great body
5. 1971 Chevy ½ ton long bed, California truck with California emissions still in place, 6 Cyl, 3 speed, original bed was stolen, replacement Wyoming bed
6. 1968 Chevy ½ ton long bed, unfinished project, great un-restored bed and parts, engine is out, minor cab rust, owner had a heart attack and could not finish this nice truck
7. 1972 Chevy ½ tom long bed, unfinished restoration, great cab and front clip, new 350 & Turbo 350 transmission, no bed
8. 1972 Chevy ½ ton Short bed, cab needs one rocker, North Carolina truck
9. 1968 Chevy long bed with nice flatbed, 400 small block with turbo 350, automatic, power steering, North Carolina truck with some rust, drives good
10. 1970 Chevy long bed, 350, 3 speed, shifts perfect, low mileage truck, some rust
11. 1972 Short bed with Cheyenne package complete, rusty low mileage truck but it is totally complete and restorable
12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side
13. 1968 short bed ½ ton frame from North Carolina
14. 1972 Chevy 1 ton rolling chassis in good shape
15. 1967 Chevy 1 ton rolling chassis with 2 cyl dump bed & pto (maybe sold)

Now for the parts, this is a partial listing and is expected to be near accurate. It would take us weeks to count all of the parts in this place.

Dash’s – 20+ including several tach dash’s, 67-68 tach dash’s, speed warning dash, and lots of gauge dash’s
Blazer top - 1
Step side bed sides
Front clips – 12+
Doors – 20+
Gas Tanks – blazer & pickup 12+
Tailgates - 13+
Heater Cores -6+
Radiators- 18+
Fan shrouds – 7+
Air conditioning boxes – 7+
2 Pallets full of small block heads including Camel Hump Heads
Bumpers – 30+ Chrome and Painted
Glove box doors – 15+
Hub Caps
Trim Rings
Transmissions – T400, T350, 3 speed, 4 Speed
Trailing arms – 30 sets
16+ Rearends – ½ ton, ¾ ton,1 ton, posi and open
Hoods – 7 +
Roofs – 3
30+ Drive shafts
Carrier Bearings
P/S boxes and pumps – 10+
Air Cleaners
Clutches
Pressure Plates
Flywheels
Flex plates
Radios
Pallet full of body trim
7 grills including one NOS 1970 grill
Small block and big block motors
Intake manifolds
Exhaust Manifolds
Steering columns including tilt, automatic and stick combinations
Black Center Console
Bell housings
Power brake set ups – 10+
Cross members for all transmissions 12+
Torque Converters – 10+
Wiring harnesses
Windshield cowls – 8+
Head liners – 6+
Rally wheels
Nuts, bolts and Misc items

I have done my best to describe all of these parts and trucks as best we can, I am sure you will find several treasures that have long since been forgotten.
These parts have been since 1970. The man that owns this material is forming a new business and needs his warehouse back.
If you have an interest he also has for additional money beyond the closing price of the auction, 65 Chevy fleet side bed sides and tailgate very nice, 55 Tbird deck lid and doors, a ton of S10 parts and several parts trucks, and several Cadillac’s.

Buyer is responsible for removing all of the material in a timely manner – this is open to discussion for your sake and ours. Payment must be made via bank certified check, or cash. We are more than willing to work with any serious buyer. The building is equipped with a freight elevator to help in moving things to the first floor.

We are asking $37,000.00 for the entire lot.
Bill Boyd
509 Raccoon Lane
Sunbury Ohio 43074
wjnboyd@msn.com
740-965-5251- Home

put me inline for a tach cluster

[slamin69]

Originally Posted by 1968SWBBigBlock

http://s162.photobucket.com/albums/t...72chevytrucks/
67-72 Chevy Truck Parts & Complete Trucks once in a lifetime

Up for sale today we have an entire warehouse full of trucks & Parts.
We have a selection of parts that have been pulled off of trucks since 1970.
Tons of the good stuff and tons of the small parts that are not made and tons driver/rough quality material.
Reserve is set at a conservative estimate of what the complete trucks would sell for on the open market. The balance of the parts could all be gravy. Again this is a conservative reserve.
Trucks and parts can be viewed by appointment only. They are located in a secure guarded location. Walk thrus are encouraged; we want you to understand what your money will be buying. This is truly a once in a lifetime opportunity for the hottest truck on the market.
I will start with the trucks and rolling chassis and finish off with estimates on the parts.
Pictures are attached; more can be taken as needed. Please ask your questions early and make your appointment for a personal walk thru

1. 1970 Longhorn Factory big block truck, motor is out and needs rebuilt, Montana truck, very solid, tool box door in good shape, Air Conditioning, Automatic T400 transmission, Big Block
2. 1968, 37,000 miles, ¾ Ton custom Camper, original bed has been off for many years since this had a camper on the chassis, very nice bed, surface rust other wise very nice, great cab
3. 68 LWB ¾ ton 327 automatic, engine is out of the truck, Oregon and North Carolina truck, never in salt, exceptional
4. 1968 1 ton flat bed, Okalahoma truck, 67,000 miles 327 4 speed aftermarket air, used to service horses, great body
5. 1971 Chevy ½ ton long bed, California truck with California emissions still in place, 6 Cyl, 3 speed, original bed was stolen, replacement Wyoming bed
6. 1968 Chevy ½ ton long bed, unfinished project, great un-restored bed and parts, engine is out, minor cab rust, owner had a heart attack and could not finish this nice truck
7. 1972 Chevy ½ tom long bed, unfinished restoration, great cab and front clip, new 350 & Turbo 350 transmission, no bed
8. 1972 Chevy ½ ton Short bed, cab needs one rocker, North Carolina truck
9. 1968 Chevy long bed with nice flatbed, 400 small block with turbo 350, automatic, power steering, North Carolina truck with some rust, drives good
10. 1970 Chevy long bed, 350, 3 speed, shifts perfect, low mileage truck, some rust
11. 1972 Short bed with Cheyenne package complete, rusty low mileage truck but it is totally complete and restorable
12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side
13. 1968 short bed ½ ton frame from North Carolina
14. 1972 Chevy 1 ton rolling chassis in good shape
15. 1967 Chevy 1 ton rolling chassis with 2 cyl dump bed & pto (maybe sold)

Now for the parts, this is a partial listing and is expected to be near accurate. It would take us weeks to count all of the parts in this place.

Dash’s – 20+ including several tach dash’s, 67-68 tach dash’s, speed warning dash, and lots of gauge dash’s
Blazer top - 1
Step side bed sides
Front clips – 12+
Doors – 20+
Gas Tanks – blazer & pickup 12+
Tailgates - 13+
Heater Cores -6+
Radiators- 18+
Fan shrouds – 7+
Air conditioning boxes – 7+
2 Pallets full of small block heads including Camel Hump Heads
Bumpers – 30+ Chrome and Painted
Glove box doors – 15+
Hub Caps
Trim Rings
Transmissions – T400, T350, 3 speed, 4 Speed
Trailing arms – 30 sets
16+ Rearends – ½ ton, ¾ ton,1 ton, posi and open
Hoods – 7 +
Roofs – 3
30+ Drive shafts
Carrier Bearings
P/S boxes and pumps – 10+
Air Cleaners
Clutches
Pressure Plates
Flywheels
Flex plates
Radios
Pallet full of body trim
7 grills including one NOS 1970 grill
Small block and big block motors
Intake manifolds
Exhaust Manifolds
Steering columns including tilt, automatic and stick combinations
Black Center Console
Bell housings
Power brake set ups – 10+
Cross members for all transmissions 12+
Torque Converters – 10+
Wiring harnesses
Windshield cowls – 8+
Head liners – 6+
Rally wheels
Nuts, bolts and Misc items

I have done my best to describe all of these parts and trucks as best we can, I am sure you will find several treasures that have long since been forgotten.
These parts have been since 1970. The man that owns this material is forming a new business and needs his warehouse back.
If you have an interest he also has for additional money beyond the closing price of the auction, 65 Chevy fleet side bed sides and tailgate very nice, 55 Tbird deck lid and doors, a ton of S10 parts and several parts trucks, and several Cadillac’s.

Buyer is responsible for removing all of the material in a timely manner – this is open to discussion for your sake and ours. Payment must be made via bank certified check, or cash. We are more than willing to work with any serious buyer. The building is equipped with a freight elevator to help in moving things to the first floor.

We are asking $37,000.00 for the entire lot.
Bill Boyd
509 Raccoon Lane
Sunbury Ohio 43074
wjnboyd@msn.com
740-965-5251- Home

i will also take a double humpper heads

[my1970c10]

i need a crossmember for an automatic , turbo 350 for a 1970 c10 lwb. please email me whinegar72@hotmail.com or call 540-493-1094 , if you are within driving distance of the Roanoke Va, area or i will pay for shipping . thanks willis