72 Chevy Frame w/ 4.10 Eaton Rear axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 06-21-2007, 11:32 AM

-
Please respond in thread.

I have the frame from a '72 Chevy C-20 for sale. It was a driven truck about a year ago that has been dismantled. It has the complete front crossmember under it but the A-arms are shot. It has the front spindles w/rotors & calipers. The drivers side rotor looks good but the pass. side has some grooves in it. Front half of the frame is good but the back half is bad. The trailing arms are shot also. It has a 4.10 Eaton rear with a two piece drive shaft. I'll take $75 for the whole thing picked up here in South Central Iowa. This does not include the wheels & tires.

I have a cutting torch and Plasma cutter so you can take as much or as little of it as you want. Any questions post 'em up.

Thanks.

LockDoc (Leon)

masterbeavis · 06-21-2007, 10:17 PM

Have you checked the rearend for a detroit? All you have to do is lift one tire and try to spin the driveshaft.

You never know, you might find gold. (I did once on accident, almost gave a rearend away before I checked it)

**LockDoc** · 06-21-2007, 10:47 PM

-
Thanks for the tip MasterBeavis.

I took a couple of pics with the cover off and posted them a while back. The consensus was, no locker.....

LockDoc

masterbeavis · 06-22-2007, 12:08 AM

well, thats a dead giveaway, them pesky spider gears.... Maybe next time you otta spray some pesticide on the housing to make them go away....

06-21-2007, 11:32 AM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,402	72 Chevy Frame w/ 4.10 Eaton Rear axle - Please respond in thread. I have the frame from a '72 Chevy C-20 for sale. It was a driven truck about a year ago that has been dismantled. It has the complete front crossmember under it but the A-arms are shot. It has the front spindles w/rotors & calipers. The drivers side rotor looks good but the pass. side has some grooves in it. Front half of the frame is good but the back half is bad. The trailing arms are shot also. It has a 4.10 Eaton rear with a two piece drive shaft. I'll take $75 for the whole thing picked up here in South Central Iowa. This does not include the wheels & tires. I have a cutting torch and Plasma cutter so you can take as much or as little of it as you want. Any questions post 'em up. Thanks. LockDoc (Leon) Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 06-21-2007 at 11:38 AM.

06-21-2007, 10:17 PM	#2
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: 72 Chevy Frame w/ 4.10 Eaton Rear axle Have you checked the rearend for a detroit? All you have to do is lift one tire and try to spin the driveshaft. You never know, you might find gold. (I did once on accident, almost gave a rearend away before I checked it)

06-21-2007, 10:47 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,402	Re: 72 Chevy Frame w/ 4.10 Eaton Rear axle - Thanks for the tip MasterBeavis. I took a couple of pics with the cover off and posted them a while back. The consensus was, no locker..... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 06-21-2007 at 10:48 PM.

06-22-2007, 12:08 AM	#4
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: 72 Chevy Frame w/ 4.10 Eaton Rear axle well, thats a dead giveaway, them pesky spider gears.... Maybe next time you otta spray some pesticide on the housing to make them go away....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.