WTB Pair of 69-72 Fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4bynut · 06-30-2007, 04:52 PM

Hey everyone i need a pair of front fenders for my mud truck (69-72). They need to be nice. But the front cup can be bad since i'll be removing it. All the ones i have are bad by where fender meets the door. Anyway I'm in northwest IL, so the closer the better. Thanks Jason

WORNBRAKES · 06-30-2007, 05:00 PM

I have 2 drivers and 1 pass fender. Like you mentioned, the closer the better as I have shipped a few and it runs from $45-80. If interested, I need 45 for the pass side, 35 for the blue drivers (someone took a grinder to it but it is straight) and 50 for the other drivers side. All plus shipping. I think the set could be boxed together and go greyhound a little cheaper. LMK
Thanks

Green Machine · 06-30-2007, 11:28 PM

Did you see these? - I am going to part out this clip since no one wants it complete - send me a PM if you are interested in the fenders - I'm about 400 miles away - Road trip ???

GM

http://67-72chevytrucks.com/vboard/s...d.php?t=244866

wibilly · 07-01-2007, 01:02 AM

one of the bigest swap meets in the country is in your back yard in a week or so. Iola wi

4bynut · 07-02-2007, 11:14 AM

Wornbrakes - I'm interested in the grey fender and the white fender. Does the white one have a dent at the bottom by the door? Or is it just a illusion from the pic? Also i'm not sure if i have a greyhound pickup close to me.

GreenMachine - thanks, but i'm looking for a set without any rust at the bottom by the door.

Wibilly - I'm not going to be able to go.

Thanks Jason

WORNBRAKES · 07-02-2007, 12:59 PM

What you see on the white one is a shadow from the other fender. Leave me your zip and I will check DHL ground. I have sent a few that way. Look at this website and see if there is a city near yours that has a station. You cant search by zip you have to know the city.
http://www.shipgreyhound.com/
Thanks

WORNBRAKES · 07-02-2007, 11:17 PM

Jason,
I did some calculating on the fenders. All of this is using the zip code 61081 I found. I checked DHL, FedEx and Greyhound.
1 fender weighs 33 pounds and measures 62x33x8 building a box around it.
2 fenders mated together weigh 70 pounds and measure 62x33x17 in a box.
DHL Ground
92.00 together
FedEx Ground
129.00 together
Greyhound to De Kalb
73.00 together

If you can think of another method, I am up for it. My zip is 75189 but I will drop it off in Dallas if needed.
Thanks

4bynut · 07-03-2007, 04:24 AM

Thanks, for checking all that. Dekalb is not that far from work so grey hound would be OK. I'd like to wait and see if anyone closer may have something tho. But if i can't find something within a reasonable drive i'll get yours. Thanks again Jason

projectking · 07-03-2007, 05:45 AM

I know of a good pair of 69-72 fenders near Morris, Il

4bynut · 07-03-2007, 12:34 PM

Quote:

Originally Posted by projectking

I know of a good pair of 69-72 fenders near Morris, Il

Who has them and how much. Thanks Jason

wibilly · 07-05-2007, 01:09 PM

i have two driverstde and one repo pass side no rust ds of one has hole from bumper rubbing through and other has some filler on bottom cup on a dent

projectking · 07-05-2007, 04:53 PM

Quote:

Originally Posted by 4bynut

Who has them and how much. Thanks Jason

I'm trying to get in touch with him.

4bynut · 07-06-2007, 04:56 AM

Quote:

Originally Posted by projectking

I'm trying to get in touch with him.

Thanks

4bynut · 07-06-2007, 05:00 AM

Quote:

Originally Posted by wibilly

i have two driverstde and one repo pass side no rust ds of one has hole from bumper rubbing through and other has some filler on bottom cup on a dent

Could you post pics please. Jason

06-30-2007, 04:52 PM	#1
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	WTB Pair of 69-72 Fenders Hey everyone i need a pair of front fenders for my mud truck (69-72). They need to be nice. But the front cup can be bad since i'll be removing it. All the ones i have are bad by where fender meets the door. Anyway I'm in northwest IL, so the closer the better. Thanks Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

06-30-2007, 05:00 PM	#2
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: WTB Pair of 69-72 Fenders I have 2 drivers and 1 pass fender. Like you mentioned, the closer the better as I have shipped a few and it runs from $45-80. If interested, I need 45 for the pass side, 35 for the blue drivers (someone took a grinder to it but it is straight) and 50 for the other drivers side. All plus shipping. I think the set could be boxed together and go greyhound a little cheaper. LMK Thanks Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

06-30-2007, 11:28 PM	#3
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: WTB Pair of 69-72 Fenders Did you see these? - I am going to part out this clip since no one wants it complete - send me a PM if you are interested in the fenders - I'm about 400 miles away - Road trip ??? GM http://67-72chevytrucks.com/vboard/s...d.php?t=244866 __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0 Last edited by Green Machine; 06-30-2007 at 11:36 PM.

07-01-2007, 01:02 AM	#4
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: WTB Pair of 69-72 Fenders one of the bigest swap meets in the country is in your back yard in a week or so. Iola wi __________________ common sense isn't so common anymore

07-02-2007, 11:14 AM	#5
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: WTB Pair of 69-72 Fenders Wornbrakes - I'm interested in the grey fender and the white fender. Does the white one have a dent at the bottom by the door? Or is it just a illusion from the pic? Also i'm not sure if i have a greyhound pickup close to me. GreenMachine - thanks, but i'm looking for a set without any rust at the bottom by the door. Wibilly - I'm not going to be able to go. Thanks Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

07-02-2007, 12:59 PM	#6
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: WTB Pair of 69-72 Fenders What you see on the white one is a shadow from the other fender. Leave me your zip and I will check DHL ground. I have sent a few that way. Look at this website and see if there is a city near yours that has a station. You cant search by zip you have to know the city. http://www.shipgreyhound.com/ Thanks __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-02-2007, 11:17 PM	#7
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: WTB Pair of 69-72 Fenders Jason, I did some calculating on the fenders. All of this is using the zip code 61081 I found. I checked DHL, FedEx and Greyhound. 1 fender weighs 33 pounds and measures 62x33x8 building a box around it. 2 fenders mated together weigh 70 pounds and measure 62x33x17 in a box. DHL Ground 92.00 together FedEx Ground 129.00 together Greyhound to De Kalb 73.00 together If you can think of another method, I am up for it. My zip is 75189 but I will drop it off in Dallas if needed. Thanks __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-03-2007, 04:24 AM	#8
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: WTB Pair of 69-72 Fenders Thanks, for checking all that. Dekalb is not that far from work so grey hound would be OK. I'd like to wait and see if anyone closer may have something tho. But if i can't find something within a reasonable drive i'll get yours. Thanks again Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

07-03-2007, 05:45 AM	#9
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: WTB Pair of 69-72 Fenders I know of a good pair of 69-72 fenders near Morris, Il __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

07-05-2007, 01:09 PM	#11
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: WTB Pair of 69-72 Fenders i have two driverstde and one repo pass side no rust ds of one has hole from bumper rubbing through and other has some filler on bottom cup on a dent __________________ common sense isn't so common anymore



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.