Measurements needed for: Side view mirror placement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70ChevyCST · 07-09-2007, 03:17 PM

I just bought this 1970 CST-10 pickup. An e-bay truck that needs a lot of things...including side view mirrors as you can see from the photo.

I just purchased this set of 1970-1972 reproduction chrome door mirrors....aka "sport mirrors" from Arrowhead truck parts (an e-bay store..I might add "Very nice guys to deal with I highly recommend them"!

Just wondering if anyone out there has the same mirrors (or similar ones at the very least). If you do and are satisfied with the location of them, could you possibly take the time to measure from the front door edge to mirror base and also from the door top (where window seals are located) to the mirror base for me? This would give me a good idea of where the proper placement is....for these mirrors on the doors. I sure would hate to guess, drill holes and then find out "I wish I would have put them just a little farther back or up...etc.etc. Even better yet....Is there documentation out there somewhere that shows door mirror location? Thanks guys, I appreciate it...
Bob

RedZ71 · 07-09-2007, 03:55 PM

those holes look like whats cracking thru some bondo on my door! ill sand and measure tonight!

handly link to where i can get some too??

70ChevyCST · 07-09-2007, 04:24 PM

Jonathan,
Here's a link to a set of mirrors just like the ones I got. They're $45.00 + $12.00 shipping! Excellent deal

http://cgi.ebay.com/ebaymotors/70-71...QQcmdZViewItem

I found this set AFTER I bought my set from Arrowhead truck parts.

http://motors.search.ebay.com/_W0QQs...headtruckparts

Isn't that the way it always goes? Not a big deal though (it's only a $13.00) difference because I payed $70.00 total. Also: I did have some shipping damage to a bumper I also ordered from him. He's sending me out another one ...no questions asked!! He's a good guy (Dominic) That's worth a lot in itself! Best wishes to you...

Bob

myoldchev · 07-09-2007, 05:08 PM

Here, check out this thread in FAQ. It should answer all your questions.
http://67-72chevytrucks.com/vboard/s...d.php?t=179279

70ChevyCST · 07-10-2007, 09:03 AM

Dan, Thanks a bunch...this is exactly what I needed. I don't know what I'd do without ALL of your help...You guys have guided me through so many problems with this truck already and I only joined a couple of months ago! And your help is especially appreciated right now Dan...Thanks again

Bob

07-09-2007, 03:17 PM	#1
70ChevyCST Registered User Join Date: May 2007 Location: usa Posts: 71	Measurements needed for: Side view mirror placement I just bought this 1970 CST-10 pickup. An e-bay truck that needs a lot of things...including side view mirrors as you can see from the photo. I just purchased this set of 1970-1972 reproduction chrome door mirrors....aka "sport mirrors" from Arrowhead truck parts (an e-bay store..I might add "Very nice guys to deal with I highly recommend them"! Just wondering if anyone out there has the same mirrors (or similar ones at the very least). If you do and are satisfied with the location of them, could you possibly take the time to measure from the front door edge to mirror base and also from the door top (where window seals are located) to the mirror base for me? This would give me a good idea of where the proper placement is....for these mirrors on the doors. I sure would hate to guess, drill holes and then find out "I wish I would have put them just a little farther back or up...etc.etc. Even better yet....Is there documentation out there somewhere that shows door mirror location? Thanks guys, I appreciate it... Bob __________________ I'm a grateful Christian not perfect in any way, but always striving to become better with Christ's help. I'm grateful for what He did for me on that cross at Calvary. I hope there is a desire in your heart for the same: If you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9

07-09-2007, 03:55 PM	#2
RedZ71 Junior Member Join Date: Jan 2007 Location: Dallas, TX Posts: 246	Re: Measurements needed for: Side view mirror placement those holes look like whats cracking thru some bondo on my door! ill sand and measure tonight! handly link to where i can get some too?? __________________ Jonathan 2001 ECSB Silverado Z71 1971 LB C10 Custom www.z71silverado.com

07-09-2007, 04:24 PM	#3
70ChevyCST Registered User Join Date: May 2007 Location: usa Posts: 71	Re: Measurements needed for: Side view mirror placement Jonathan, Here's a link to a set of mirrors just like the ones I got. They're $45.00 + $12.00 shipping! Excellent deal http://cgi.ebay.com/ebaymotors/70-71...QQcmdZViewItem I found this set AFTER I bought my set from Arrowhead truck parts. http://motors.search.ebay.com/_W0QQs...headtruckparts Isn't that the way it always goes? Not a big deal though (it's only a $13.00) difference because I payed $70.00 total. Also: I did have some shipping damage to a bumper I also ordered from him. He's sending me out another one ...no questions asked!! He's a good guy (Dominic) That's worth a lot in itself! Best wishes to you... Bob __________________ I'm a grateful Christian not perfect in any way, but always striving to become better with Christ's help. I'm grateful for what He did for me on that cross at Calvary. I hope there is a desire in your heart for the same: If you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9 Last edited by 70ChevyCST; 07-09-2007 at 04:26 PM. Reason: I would like to address the previous post personally

07-09-2007, 05:08 PM	#4
myoldchev Junior Member Join Date: Aug 2006 Location: WA Posts: 78	Re: Measurements needed for: Side view mirror placement Here, check out this thread in FAQ. It should answer all your questions. http://67-72chevytrucks.com/vboard/s...d.php?t=179279 __________________ DAN 69 CUSTOM 10 LWB:

07-10-2007, 09:03 AM	#5
70ChevyCST Registered User Join Date: May 2007 Location: usa Posts: 71	Re: Measurements needed for: Side view mirror placement Dan, Thanks a bunch...this is exactly what I needed. I don't know what I'd do without ALL of your help...You guys have guided me through so many problems with this truck already and I only joined a couple of months ago! And your help is especially appreciated right now Dan...Thanks again Bob __________________ I'm a grateful Christian not perfect in any way, but always striving to become better with Christ's help. I'm grateful for what He did for me on that cross at Calvary. I hope there is a desire in your heart for the same: If you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9 Last edited by 70ChevyCST; 07-10-2007 at 09:19 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.