any have any problems here and did you fix it - The 1947 - Present Chevrolet & GMC Truck Message Board Network

deer slayer · 07-10-2007, 11:24 PM

i did a roof and back cab swap and all my measurements are correct but my gap by the pillar goes from 1/2 at bottom to0 at top just wondering if anybody else had this issue and how it was fixed it fit the same before i cut it

**Palf70Step** · 07-11-2007, 05:32 AM

You might need to shim your door hinge(s) to get the gap closer. They were not that great to begin with. I have seen some do some pulling/manipulation of the window frame to try and even them out also.

How are the rest of the gaps? Top, rear bottom?

deer slayer · 07-11-2007, 03:59 PM

the back is nice and i dont have the rocker on yet but the frame looks out of wack i pulled the frame back last night and it looked alot better i wanna try to stay as far away from shims as possible the truck i oringanly bought had like half inch shims

07-10-2007, 11:24 PM	#1
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	any have any problems here and did you fix it i did a roof and back cab swap and all my measurements are correct but my gap by the pillar goes from 1/2 at bottom to0 at top just wondering if anybody else had this issue and how it was fixed it fit the same before i cut it Attached Images

07-11-2007, 05:32 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: any have any problems here and did you fix it You might need to shim your door hinge(s) to get the gap closer. They were not that great to begin with. I have seen some do some pulling/manipulation of the window frame to try and even them out also. How are the rest of the gaps? Top, rear bottom? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 07-11-2007 at 05:33 AM.

07-11-2007, 03:59 PM	#3
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: any have any problems here and did you fix it the back is nice and i dont have the rocker on yet but the frame looks out of wack i pulled the frame back last night and it looked alot better i wanna try to stay as far away from shims as possible the truck i oringanly bought had like half inch shims



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.