Looking for Corvette suspension and rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**John Fabris** · 07-12-2007, 10:05 AM

Hi All,

I just listed a few thing on ebay like a tilt colunm (van), t400 throttle assebly, reman brake booster, 67 dash and some other goodies to raise $$ for my new 67 short fleet. (EBAY LINK) I had these parts stashed for this truck, but now I am going to build a full custom out of it and now I am looking for front and rear corvette suspension from 1984 to 1996 as well as the black five star corvette wheels. Just checking here to see if anyone has any leads on these parts...

robin58 · 07-12-2007, 10:28 AM

Are you going to manufacture your own Corvettte crossmember or use a kit like Flat Out Engineering's? If using Flat Out, they sometimes have access to used parts. Otherwise eBay will often have listings. My son paid under $200 for the upper lower and control arms, spindles, rotors, calipers and steering rack.

Progressive Automotive sells complete kits including the Corvette parts which are rebuilt although they don't list your model truck as one they make a "kit" for.

Another source for used parts:

http://www.contemporarycorvette.com/

**John Fabris** · 07-12-2007, 10:35 AM

Thanks Robin. I am planning on trying out the Flat Out Engineering's kit. I have been looking around on Craigslist, Ebay and by word of mouth. Looking to get the suspension in the next two weeks as I have all of the sheetmetal on the truck and really need to get the suspension in place to center the wheels and see what the ride hight will be. Once that is done, then I will start mods to the truck and frame... Main theme for this truck is SMOOOOOTH...

GMC AMI · 07-13-2007, 12:06 PM

I guess you would not be interested in an original 72 corvette GM highrise intake? GM stamped snow F. intake?

*trkklr77* · 07-13-2007, 12:19 PM

i would though, price?

what time frame of vette rear suspension are you looking for? my buddy has a couple of mid 70's diff, arms, shafts, knuckle, spindle, rotor setups.

70rs/ss · 07-13-2007, 01:14 PM

Check with porterbuilt, his dropmember is engineered to take the vette front and rear. I have seen it in person, very nice!!

**John Fabris** · 07-13-2007, 01:18 PM

Updated my post, I am looking for 84-96 corvette suspension...

I have been looking at porterbuilt's peice, pretty nice!! Pricey too... (about twice the $$ of what flat out has thou)

07-12-2007, 10:05 AM	#1
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Looking for Corvette suspension and rims Hi All, I just listed a few thing on ebay like a tilt colunm (van), t400 throttle assebly, reman brake booster, 67 dash and some other goodies to raise $$ for my new 67 short fleet. (EBAY LINK) I had these parts stashed for this truck, but now I am going to build a full custom out of it and now I am looking for front and rear corvette suspension from 1984 to 1996 as well as the black five star corvette wheels. Just checking here to see if anyone has any leads on these parts... __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 07-13-2007 at 01:16 PM.

07-12-2007, 10:28 AM	#2
robin58 Registered User Join Date: May 2007 Location: Louisiana Posts: 763	Re: Looking for Corvette suspension and rims Are you going to manufacture your own Corvettte crossmember or use a kit like Flat Out Engineering's? If using Flat Out, they sometimes have access to used parts. Otherwise eBay will often have listings. My son paid under $200 for the upper lower and control arms, spindles, rotors, calipers and steering rack. Progressive Automotive sells complete kits including the Corvette parts which are rebuilt although they don't list your model truck as one they make a "kit" for. Another source for used parts: http://www.contemporarycorvette.com/

07-12-2007, 10:35 AM	#3
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Looking for Corvette suspension and rims Thanks Robin. I am planning on trying out the Flat Out Engineering's kit. I have been looking around on Craigslist, Ebay and by word of mouth. Looking to get the suspension in the next two weeks as I have all of the sheetmetal on the truck and really need to get the suspension in place to center the wheels and see what the ride hight will be. Once that is done, then I will start mods to the truck and frame... Main theme for this truck is SMOOOOOTH... __________________ John Fabris 67 C10 SWB

07-13-2007, 12:06 PM	#4
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Re: Looking for Corvette suspension and rims I guess you would not be interested in an original 72 corvette GM highrise intake? GM stamped snow F. intake?

07-13-2007, 12:19 PM	#5
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: Looking for Corvette suspension and rims i would though, price? what time frame of vette rear suspension are you looking for? my buddy has a couple of mid 70's diff, arms, shafts, knuckle, spindle, rotor setups.

07-13-2007, 01:14 PM	#6
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Looking for Corvette suspension and rims Check with porterbuilt, his dropmember is engineered to take the vette front and rear. I have seen it in person, very nice!!

07-13-2007, 01:18 PM	#7
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Looking for Corvette suspension and rims Updated my post, I am looking for 84-96 corvette suspension... I have been looking at porterbuilt's peice, pretty nice!! Pricey too... (about twice the $$ of what flat out has thou) __________________ John Fabris 67 C10 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.