What I have been up to.................progress finally - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 07-15-2007, 10:34 AM

Been busy tring to get my truck back on the road get gets pretty old looking at it sitting in the garage so I m on a mission to get it done and on the road paint maybe a ways down the road but at least I will be able to enjoy it... I stripped the frame down and welded up al the unused holes and got some por-15 on it,sectioned the crossmember and....btw the pics are backwards the top pic is where im at now..

LUV2XCLR8 · 07-15-2007, 10:38 AM

Any progress is better than no progress

FRENCHBLUE72 · 07-15-2007, 10:40 AM

air ride tech strong arms bags and more por-15

FRENCHBLUE72 · 07-15-2007, 10:49 AM

More air ride tech stuff and bags along with more por-15... I need to pull the rotors off and spindals and get powder coated....

FRENCHBLUE72 · 07-15-2007, 10:59 AM

All together and sitting on the ground.......... Got the steering all clearanced just need to get the box hooked to the column.. Stll needs to come back apart to route the airlines for the bags,powder coart the steering and touch up the por-15 on the crossmember..

FRENCHBLUE72 · 07-15-2007, 11:10 AM

truck on the ground before I tear apart the front clip for the firewall mods..

FRENCHBLUE72 · 07-15-2007, 11:24 AM

Blew the front clip off and started the firewall..

FRENCHBLUE72 · 07-15-2007, 11:28 AM

Lots of mud to sand today...... Hope fully Ill get it sanded and into primer today...

FRENCHBLUE72 · 07-15-2007, 11:32 AM

My new rockers cam yesterday so I figured that when my arms wear out from sanding I can work on the rocker replacement.... Hopefull this thread will get me to work on the truck and keep it going....

**Stocker** · 07-15-2007, 11:34 AM

Lookin' good!

LUV2XCLR8 · 07-15-2007, 02:31 PM

X2

masterbeavis · 07-15-2007, 04:11 PM

Progress is good. I opened the door on my blazer yesterday, was greeted with a million spider webs. I still have duct tape holding the smog pump from turning.... My dog didnt even want to get inside of it....

Is that bondo type filler on the firewall going to not shrink or crack after time?

bad6772 · 07-15-2007, 04:26 PM

looks great , did you fill the area on the firewall, where the wires sit on with mudd? or did you fill it with metal first. keep up the great work looks killer

FRENCHBLUE72 · 07-15-2007, 05:11 PM

Filled it with metal first took forever to weld and grind the the srtip of metal in....beavis if its gonna shrink so is the rest of the repairs that I have done.... Should be ok...

FRENCHBLUE72 · 07-15-2007, 06:24 PM

More por-15 on the inner firewall.....

FRENCHBLUE72 · 07-15-2007, 06:28 PM

Por-15 on the inner rocker and outter rocker.. I used silver por-15 on the floor boards..........

*72CSTC5* · 07-15-2007, 06:40 PM

Hey I like it, she looks good. You have alot of money in the front suspension there.

FRENCHBLUE72 · 07-15-2007, 06:49 PM

Too bad the rotors and spindals look like crap I still need to pull them off and powder coat them..

FRENCHBLUE72 · 07-15-2007, 10:36 PM

Got the rockers ready to weld in and some sanding done... Need some more sand paper....

**Palf70Step** · 07-16-2007, 05:36 AM

It's always good to move ahead. Truck is coming along nicely!

surf200010345287 · 07-16-2007, 05:44 PM

Awsome work. That looks sweeeet. Do you have a cnotch in the back with bags?

Scott68-93-97 · 07-19-2007, 07:16 PM

Speed up the progress on the 7duece maybe Ill see it on the road Ill be in grants pass around Oct. to visit family

Virginia72SWB4X4 · 07-19-2007, 07:45 PM

Looks great keep it up! I've got to dig into my rockers to, but the rest of the paint doesnt look to bad.
I dont want a smaller probelm to turn into a very expensive big one..

Gary

FRENCHBLUE72 · 07-19-2007, 08:07 PM

Surf no bags and no notch in the back.. yet.....

FRENCHBLUE72 · 07-22-2007, 03:05 PM

Almost done with the firewall should have pics up tonight..

07-15-2007, 10:34 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	The 7deuce Project By Frenchblue72........07 Been busy tring to get my truck back on the road get gets pretty old looking at it sitting in the garage so I m on a mission to get it done and on the road paint maybe a ways down the road but at least I will be able to enjoy it... I stripped the frame down and welded up al the unused holes and got some por-15 on it,sectioned the crossmember and....btw the pics are backwards the top pic is where im at now.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 07-15-2007 at 10:37 PM.

07-15-2007, 10:38 AM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: What I have been up to.................progress finally Any progress is better than no progress __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-15-2007, 10:40 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally air ride tech strong arms bags and more por-15 Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 10:49 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally More air ride tech stuff and bags along with more por-15... I need to pull the rotors off and spindals and get powder coated.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 07-15-2007 at 10:52 AM.

07-15-2007, 10:59 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally All together and sitting on the ground.......... Got the steering all clearanced just need to get the box hooked to the column.. Stll needs to come back apart to route the airlines for the bags,powder coart the steering and touch up the por-15 on the crossmember.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 07-15-2007 at 11:02 AM.

07-15-2007, 11:10 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally truck on the ground before I tear apart the front clip for the firewall mods.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 11:24 AM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Blew the front clip off and started the firewall.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 11:28 AM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Lots of mud to sand today...... Hope fully Ill get it sanded and into primer today... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 11:32 AM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally My new rockers cam yesterday so I figured that when my arms wear out from sanding I can work on the rocker replacement.... Hopefull this thread will get me to work on the truck and keep it going.... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 11:34 AM	#10
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,695	Re: What I have been up to.................progress finally Lookin' good! __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

07-15-2007, 02:31 PM	#11
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: What I have been up to.................progress finally X2 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-15-2007, 04:11 PM	#12
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: What I have been up to.................progress finally Progress is good. I opened the door on my blazer yesterday, was greeted with a million spider webs. I still have duct tape holding the smog pump from turning.... My dog didnt even want to get inside of it.... Is that bondo type filler on the firewall going to not shrink or crack after time?

07-15-2007, 04:26 PM	#13
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: What I have been up to.................progress finally looks great , did you fill the area on the firewall, where the wires sit on with mudd? or did you fill it with metal first. keep up the great work looks killer

07-15-2007, 05:11 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Filled it with metal first took forever to weld and grind the the srtip of metal in....beavis if its gonna shrink so is the rest of the repairs that I have done.... Should be ok... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 06:24 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally More por-15 on the inner firewall..... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

07-15-2007, 06:28 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Por-15 on the inner rocker and outter rocker.. I used silver por-15 on the floor boards.......... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 06:40 PM	#17
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: What I have been up to.................progress finally Hey I like it, she looks good. You have alot of money in the front suspension there.

07-15-2007, 06:49 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Too bad the rotors and spindals look like crap I still need to pull them off and powder coat them.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 10:36 PM	#19
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Got the rockers ready to weld in and some sanding done... Need some more sand paper.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-16-2007, 05:36 AM	#20
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,086	Re: What I have been up to.................progress finally It's always good to move ahead. Truck is coming along nicely! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-16-2007, 05:44 PM	#21
surf200010345287 Registered User Join Date: Jan 2007 Location: Washington Posts: 8	Re: What I have been up to.................progress finally Awsome work. That looks sweeeet. Do you have a cnotch in the back with bags?

07-19-2007, 07:16 PM	#22
Scott68-93-97 Registered User Join Date: Jul 2006 Location: Fair Oaks, CA Posts: 475	Re: What I have been up to.................progress finally Speed up the progress on the 7duece maybe Ill see it on the road Ill be in grants pass around Oct. to visit family __________________ 1968 Short Fleet 350/700r4 http://67-72chevytrucks.com/vboard/s...d.php?t=249435 1997 Bagged XtdCab Vortec350/4L60e http://67-72chevytrucks.com/vboard/s...44#post2286144 1993 XtdCab Longbed 4x4 6.5Turbo/NV4500 "Daily Driver" 1985 Toyota XtdCab 4x4 22re/W-56/Dual T-cases, Doug Thorley Header, Homebrew front and rear spring packs, Tons of Mods to suspension and drivetrain, 35" boggers, coming soon ARB's and 5.29's, Possible 4.3/700r4 swap

07-19-2007, 07:45 PM	#23
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	Re: What I have been up to.................progress finally Looks great keep it up! I've got to dig into my rockers to, but the rest of the paint doesnt look to bad. I dont want a smaller probelm to turn into a very expensive big one.. Gary Last edited by Virginia72SWB4X4; 07-19-2007 at 07:49 PM.

07-19-2007, 08:07 PM	#24
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Surf no bags and no notch in the back.. yet..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-22-2007, 03:05 PM	#25
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What I have been up to.................progress finally Almost done with the firewall should have pics up tonight.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.