Parts Yard Meets Metal Dumpster - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 07-24-2007, 05:16 PM

Metal dumpster landed at the shop on Monday, time to get busy.

No sure how to post this without getting buried by "I want" replies.

Anyway, pulling apart 8 trucks.

Saving what's worth saving and scraping the rest.

Lots of good stuff:
Frames - Grilles - Front Clips - Doors - Motors - tranny's - Glass...etc.

5-lug rally's with rings and tires that have only 500 miles on em. $400.00
(tires alone were over $500)

I'll start taking pics and posting prices as parts come off.

One truck that's worth selling as a whole is the 1972 3/4 ton 4x4 burb.
Factory 3/4 ton truck with all the original running gear, it's got 4:10 gears.
Interior is complete but certainly dated.
Great front clip with a really nice inner/outter grill
350 crate motor with about 6K on it, runs great but the th-350 is getting tired, new dual exhaust. $950.00 obo.

Please reply here, no hidden pm's accepted.

Delivery available for the burb or any of the bigger parts @ buyers expense.

bean · 07-24-2007, 05:20 PM

looking for a passenger side rear fender for a 69 short stepside.

02_GMC_97_FIII · 07-24-2007, 05:33 PM

Shortbox Fleet Bed (can't hurt asking

)
TH350 Flywheel Cover
Front and Rear Chrome "Sport" Bumpers
Both Inner Fenders
Core Support for '67/'68

Have a list but will stop there for now.

Thanks,
Matt

nplocoman · 07-24-2007, 05:38 PM

Save an assortment of bolts screws and small hardware for the cab, front clip, fenders, doors, trim, interior etc. I need a spare assortment. Don't need large hardware as much but if you throw it in a can that would be great as well. Thanks Oh yea, I could use a good outer grill for a 69.

nplocoman · 07-24-2007, 05:44 PM

Do the grab bag sale. These went well earlier. I think he bought prepaid boxes layed stuff out on a towel and then took a few pic's of the odds and ends and sent. Very easy! I wonder if a truckload sale would work as well

**Thealien** · 07-24-2007, 08:43 PM

Kick panel vents passenger side both AC and non AC

Any blazer gas tanks I could get the filler tube off of?

Console?

passenger side inner fender

Jack, jack handle, and lug wrench from a blazer

blazer doors

What ya got?

*trkklr77* · 07-24-2007, 09:35 PM

i need a 69+ ebrake main cable from pedal to the loop cable

and a loop cable from a short bed.

longhorn70gmc · 07-25-2007, 12:08 AM

High VTBLAZER,
Looking for a non cracked pointer housing for 69 or 70 Non Tilt Column and a 70's seat belt for the middle passenger maby in white, green or black? Thanks Much!!!!!

Sams68C10 · 07-25-2007, 12:24 AM

Any AC stuff?

Thanks,

Sam

michaelssmith21 · 07-25-2007, 12:40 AM

I am looking for the interior cargo door handle fora 72 suburban c10, cargo doors. I can't find one anywhere. Just let me know thanks!

jackyl9999 · 07-25-2007, 01:13 AM

(custom) emblems that go on the doors under windows

Chevyman63 · 07-25-2007, 06:44 AM

Looking for both front inner fenders, front bumper and possibly a driver's side front fender. All for a 72.
Thanks

*FormerMember* · 07-25-2007, 07:23 AM

I don't remember seeing one, but a 67-8 front clip

Can't believe you're ripping apart the "yard".

Chris H · 07-25-2007, 08:37 AM

Quote:

Originally Posted by vtblazer

One truck that's worth selling as a whole is the 1972 3/4 ton 4x4 burb.
Factory 3/4 ton truck with all the original running gear, it's got 4:10 gears.
Interior is complete but certainly dated.
Great front clip with a really nice inner/outter grill
350 crate motor with about 6K on it, runs great but the th-350 is getting tired, new dual exhaust. $950.00 obo.

Please reply here, no hidden pm's accepted.

Delivery available for the burb or any of the bigger parts @ buyers expense.

You are way far away, but I might "need" this one! Post up a pic or 2 if/when you get a chance.
Thanks

**jaros44sr** · 07-25-2007, 11:50 AM

LMK on the burb running gear if it gets split up, I don't want tobe the one that takes the first part off of a nice classic vehickle.... J.

jb4short · 07-25-2007, 11:51 AM

got pics of the wheels and tires?

DennyB · 07-25-2007, 11:58 AM

Any have sport mirrors on them?

Need at least a drivers side. need it soon even if its temporary.

Thanks,

vtblazer · 07-25-2007, 12:48 PM

Quote:

Originally Posted by Chris H

You are way far away, but I might "need" this one! Post up a pic or 2 if/when you get a chance.
Thanks

The ole gal does drive but it's deffinetly more of a parts truck.

Here's some pics, have tons more if interested.

hgs_notes · 07-25-2007, 02:40 PM

Chris H, that looks like an awesome deal. If you end up going to get it, let me know so you can bring back those old rock sliders from his crawler. If I didn't already have a jimmy project and a C-10 project, I would have to consider this burb also.

Good luck, VT

Chevyman63 · 07-25-2007, 07:16 PM

Wow...that's a pretty nice parts truck!

vtblazer · 07-25-2007, 09:44 PM

Quote:

Originally Posted by Chevyman63

Wow...that's a pretty nice parts truck!

Looks good in the pics but the floor is damn tender.

Fired right up, moved it and mowed the grass where it had been sitting.

Working on linking up all the pics, should be able to have it done by Thurs.

Went up and took another 50 pics, covers most of everything up there worth saving.

*FormerMember* · 07-25-2007, 09:56 PM

Quote:

Originally Posted by vtblazer

Looks good in the pics but the floor is damn tender.

Fired right up, moved it and mowed the grass where it had been sitting.

Working on linking up all the pics, should be able to have it done by Thurs.

Went up and took another 50 pics, covers most of everything up there worth saving.

Kurt, do you think the Burb cab would be a good candidate for a Crew Cab conversion?

(thinking evil thoughts that will probably net me another project...)

TooMany2count · 07-25-2007, 10:23 PM

I'm about broke but I need a steering column for an automatic(68chevy) & I don't care if its a tilt or not, what kinda deal will you give w/shipping to 62206....joe

Chris H · 07-25-2007, 10:26 PM

Quote:

Originally Posted by vtblazer

The ole gal does drive but it's deffinetly more of a parts truck.

Here's some pics, have tons more if interested.

Thanks for the pics, I thought that was the one... I dont exactly know why, but I love that thing!

I am going to step aside for a little bit, and hope someone else buys it before I find myself driving to VT to pick it up! (what is a city in your general location so I can look at a map?)
1100-1300 miles more than doubles the cost of the truck for me

vtblazer · 07-25-2007, 10:37 PM

Quote:

Originally Posted by Chris H

Thanks for the pics, I thought that was the one... I dont exactly know why, but I love that thing!

I am going to step aside for a little bit, and hope someone else buys it before I find myself driving to VT to pick it up! (what is a city in your general location so I can look at a map?)
1100-1300 miles more than doubles the cost of the truck for me

Central VT, near Montpelier. 05602 is the zip.
I'm willing to meet ya half way if that helps.

07-24-2007, 05:16 PM	#1
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Parts Yard Meets Metal Dumpster Metal dumpster landed at the shop on Monday, time to get busy. No sure how to post this without getting buried by "I want" replies. Anyway, pulling apart 8 trucks. Saving what's worth saving and scraping the rest. Lots of good stuff: Frames - Grilles - Front Clips - Doors - Motors - tranny's - Glass...etc. 5-lug rally's with rings and tires that have only 500 miles on em. $400.00 (tires alone were over $500) I'll start taking pics and posting prices as parts come off. One truck that's worth selling as a whole is the 1972 3/4 ton 4x4 burb. Factory 3/4 ton truck with all the original running gear, it's got 4:10 gears. Interior is complete but certainly dated. Great front clip with a really nice inner/outter grill 350 crate motor with about 6K on it, runs great but the th-350 is getting tired, new dual exhaust. $950.00 obo. Please reply here, no hidden pm's accepted. Delivery available for the burb or any of the bigger parts @ buyers expense.

07-24-2007, 05:20 PM	#2
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: Parts Yard Meets Metal Dumpster looking for a passenger side rear fender for a 69 short stepside.

07-24-2007, 05:33 PM	#3
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: Parts Yard Meets Metal Dumpster Shortbox Fleet Bed (can't hurt asking ) TH350 Flywheel Cover Front and Rear Chrome "Sport" Bumpers Both Inner Fenders Core Support for '67/'68 Have a list but will stop there for now. Thanks, Matt __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP Last edited by 02_GMC_97_FIII; 07-24-2007 at 05:35 PM.

07-24-2007, 05:38 PM	#4
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: Parts Yard Meets Metal Dumpster Save an assortment of bolts screws and small hardware for the cab, front clip, fenders, doors, trim, interior etc. I need a spare assortment. Don't need large hardware as much but if you throw it in a can that would be great as well. Thanks Oh yea, I could use a good outer grill for a 69. Last edited by nplocoman; 07-24-2007 at 05:52 PM.

07-24-2007, 05:44 PM	#5
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: Parts Yard Meets Metal Dumpster Do the grab bag sale. These went well earlier. I think he bought prepaid boxes layed stuff out on a towel and then took a few pic's of the odds and ends and sent. Very easy! I wonder if a truckload sale would work as well Last edited by nplocoman; 07-24-2007 at 05:47 PM.

07-24-2007, 08:43 PM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Parts Yard Meets Metal Dumpster Kick panel vents passenger side both AC and non AC Any blazer gas tanks I could get the filler tube off of? Console? passenger side inner fender Jack, jack handle, and lug wrench from a blazer blazer doors What ya got? Last edited by Thealien; 07-24-2007 at 08:46 PM. Reason: forgot sumthing

07-24-2007, 09:35 PM	#7
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 775	Re: Parts Yard Meets Metal Dumpster i need a 69+ ebrake main cable from pedal to the loop cable and a loop cable from a short bed.

07-25-2007, 12:08 AM	#8
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Parts Yard Meets Metal Dumpster High VTBLAZER, Looking for a non cracked pointer housing for 69 or 70 Non Tilt Column and a 70's seat belt for the middle passenger maby in white, green or black? Thanks Much!!!!! __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

07-25-2007, 12:24 AM	#9
Sams68C10 Registered User Join Date: Dec 2006 Location: Okmulgee, Oklahoma Posts: 21	Re: Parts Yard Meets Metal Dumpster Any AC stuff? Thanks, Sam __________________ Samuel Cochran 67 Chevelle 396 4Spd-Project 68 Camaro 327 4Spd in Garage 68 C10 350 4-Blt 700R4 Auto Daily Driver 92 Stealth ES 1 Owner Driver, 02 Tahoe Momma's

07-25-2007, 12:40 AM	#10
michaelssmith21 Registered User Join Date: Jul 2007 Location: Portland, Oregon Posts: 11	Re: Parts Yard Meets Metal Dumpster I am looking for the interior cargo door handle fora 72 suburban c10, cargo doors. I can't find one anywhere. Just let me know thanks!

07-25-2007, 01:13 AM	#11
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: Parts Yard Meets Metal Dumpster (custom) emblems that go on the doors under windows __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

07-25-2007, 06:44 AM	#12
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Parts Yard Meets Metal Dumpster Looking for both front inner fenders, front bumper and possibly a driver's side front fender. All for a 72. Thanks __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

07-25-2007, 07:23 AM	#13
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parts Yard Meets Metal Dumpster I don't remember seeing one, but a 67-8 front clip Can't believe you're ripping apart the "yard". Last edited by FormerMember; 07-25-2007 at 07:24 AM.

07-25-2007, 11:50 AM	#15
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Parts Yard Meets Metal Dumpster LMK on the burb running gear if it gets split up, I don't want tobe the one that takes the first part off of a nice classic vehickle.... J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-25-2007, 11:51 AM	#16
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Parts Yard Meets Metal Dumpster got pics of the wheels and tires?



Register or Log In To remove these advertisements.

07-25-2007, 11:58 AM	#17
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: Parts Yard Meets Metal Dumpster Any have sport mirrors on them? Need at least a drivers side. need it soon even if its temporary. Thanks, __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

07-25-2007, 02:40 PM	#19
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Parts Yard Meets Metal Dumpster Chris H, that looks like an awesome deal. If you end up going to get it, let me know so you can bring back those old rock sliders from his crawler. If I didn't already have a jimmy project and a C-10 project, I would have to consider this burb also. Good luck, VT __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-25-2007, 07:16 PM	#20
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Parts Yard Meets Metal Dumpster Wow...that's a pretty nice parts truck! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

07-25-2007, 10:23 PM	#23
TooMany2count Who's in CHARGE?????????? Join Date: Nov 2002 Location: Cahokia, IL Posts: 454	Re: Parts Yard Meets Metal Dumpster I'm about broke but I need a steering column for an automatic(68chevy) & I don't care if its a tilt or not, what kinda deal will you give w/shipping to 62206....joe __________________ Send a card to a soldier in Iraq My Music PlayList Large Marge Donate Blood,Plasma,Platelets & sign your DONORS CARD & SAVE a LIFE

Register or Log In To remove these advertisements.