Dual horns picture - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 longhorn BB · 08-14-2007, 08:36 AM

Has anyone got a picture of where their two horns are located by the rad support.

I swear, I can not find where teh rad support mounted horn is supposed to go, but I have two of them and the harness, so they must fit somewhere.

Anybody recall if they hava a picture in their stash that shows the 2 OEM locations?

72 longhorn BB · 08-15-2007, 02:11 PM

ttt

Mt Man Chad · 08-15-2007, 02:35 PM

Here ya go...

cameeks · 08-15-2007, 02:41 PM

I mounted my horns here

Really wish I could help my PO mounted my single horn here

prg machine · 08-15-2007, 03:12 PM

Without a picture the best I can do is describe where I pulled the dual horn set up off of my core support,... There are two tapped holes 5/16nc in some welded on tabs that are real close to the stock volt regulator mount just below the left headlamp. Look there. The harness was such that there is still only one plug as for a single horn, but I believe like a jumper was there between the 2 horns. It has been several years ago that I pulled them from the junk yard.
Good luck.

cameeks · 08-15-2007, 03:24 PM

here is a pic of where he was describing. The only one I have. You might be able to see it.

cameeks · 08-15-2007, 03:26 PM

well I guess not. But how do you like the PO wiring

Bob Moore · 08-19-2007, 12:38 AM

Chuck - the basic horn (single only) bolts to the weld nut showing in cameeks post # 6. It is at the same level as the bottom of the VR. The optional horn (dual) mounts to the weld nut as shown by Chad in post #3. It is at about 7:30 o'clock from the center of the headlight and can be seen where the horn wire goes/\.

prg machine · 08-19-2007, 01:07 AM

What the ..........??????

prg machine · 08-19-2007, 01:11 AM

mtnmanchad,,,,, Hey there, is that a second bat tray I see in Post 3 or nwhat the Hey is it?????

prg machine · 08-19-2007, 01:14 AM

Quote:

Originally Posted by Bob Moore

Chuck - the basic horn (single only) bolts to the weld nut showing in cameeks post # 6. It is at the same level as the bottom of the VR. The optional horn (dual) mounts to the weld nut as shown by Chad in post #3. It is at about 7:30 o'clock from the center of the headlight and can be seen where the horn wire goes/\.

Where is the weld nut in post 6 that you reference????

blukangoo · 08-19-2007, 03:28 AM

Here is where mine is. I think that is the original spot for it.

Bob Moore · 08-19-2007, 02:19 PM

prg machine - the weld nut is even with the parklight wires going through the core just to the right.

Longhorn Man · 08-19-2007, 03:00 PM

Quote:

Originally Posted by prg machine

mtnmanchad,,,,, Hey there, is that a second bat tray I see in Post 3 or nwhat the Hey is it?????

that would be the optional Aux battery tray, yes. It was common on trucks that hadcamper bodys built on, or pick ups optioned for slide in campers.

72 longhorn BB · 08-20-2007, 01:52 PM

Hey there all - thanks for all that constructive input. I got confused cus I had the aux. battery tray and it was using the lower bolt on the rad support. I did not think the horn would share it.

Great input.

Thanks

aventur1 · 08-21-2007, 08:35 PM

OK, here's a photo of the duel horn setup. I'm thinking since I'm the 3rd owner of this family farm truck Father, bought it new, son had it up to about a month ago and I bought it. Here's the photo. Hope this helps! Oh ya this is a 71 Longbox Cheyenne

prg machine · 08-21-2007, 10:35 PM

Quote:

Originally Posted by blukangoo

Here is where mine is. I think that is the original spot for it.

If my memorys recal it, the Horns I grabbed from the pickinpull were mounted like this, and the second one I am remembering shared that ground wire bolt.

aventur1 · 08-21-2007, 10:50 PM

How long ago was that prg?

70' GMC · 08-21-2007, 11:03 PM

the easiest way to do it is........ have the hood raised and then have someone on the inside of the cab and mash the horn button and you will find em and when you pull that stunt make sure you have some aspirin

08-14-2007, 08:36 AM	#1
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Dual horns picture Has anyone got a picture of where their two horns are located by the rad support. I swear, I can not find where teh rad support mounted horn is supposed to go, but I have two of them and the harness, so they must fit somewhere. Anybody recall if they hava a picture in their stash that shows the 2 OEM locations? __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

08-15-2007, 02:11 PM	#2
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Dual horns picture ttt __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

08-15-2007, 02:41 PM	#4
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Dual horns picture I mounted my horns here Really wish I could help my PO mounted my single horn here __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

08-15-2007, 03:12 PM	#5
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Dual horns picture Without a picture the best I can do is describe where I pulled the dual horn set up off of my core support,... There are two tapped holes 5/16nc in some welded on tabs that are real close to the stock volt regulator mount just below the left headlamp. Look there. The harness was such that there is still only one plug as for a single horn, but I believe like a jumper was there between the 2 horns. It has been several years ago that I pulled them from the junk yard. Good luck.

08-15-2007, 03:24 PM	#6
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Dual horns picture here is a pic of where he was describing. The only one I have. You might be able to see it. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

08-15-2007, 02:35 PM	#3
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Dual horns picture Here ya go... Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

08-15-2007, 03:26 PM	#7
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Dual horns picture well I guess not. But how do you like the PO wiring __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules

08-19-2007, 12:38 AM	#8
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Dual horns picture Chuck - the basic horn (single only) bolts to the weld nut showing in cameeks post # 6. It is at the same level as the bottom of the VR. The optional horn (dual) mounts to the weld nut as shown by Chad in post #3. It is at about 7:30 o'clock from the center of the headlight and can be seen where the horn wire goes/\. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow Last edited by Bob Moore; 08-19-2007 at 12:45 AM.

08-19-2007, 01:07 AM	#9
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Dual horns picture What the ..........??????

08-19-2007, 01:11 AM	#10
prg machine Registered User Join Date: Jun 2007 Location: oregon Posts: 1,069	Re: Dual horns picture mtnmanchad,,,,, Hey there, is that a second bat tray I see in Post 3 or nwhat the Hey is it?????

08-19-2007, 03:28 AM	#12
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Dual horns picture Here is where mine is. I think that is the original spot for it. Attached Images __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

08-19-2007, 02:19 PM	#13
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Dual horns picture prg machine - the weld nut is even with the parklight wires going through the core just to the right. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

08-20-2007, 01:52 PM	#15
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Dual horns picture Hey there all - thanks for all that constructive input. I got confused cus I had the aux. battery tray and it was using the lower bolt on the rad support. I did not think the horn would share it. Great input. Thanks __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

08-21-2007, 08:35 PM	#16
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Dual horns picture OK, here's a photo of the duel horn setup. I'm thinking since I'm the 3rd owner of this family farm truck Father, bought it new, son had it up to about a month ago and I bought it. Here's the photo. Hope this helps! Oh ya this is a 71 Longbox Cheyenne Attached Images Last edited by aventur1; 08-21-2007 at 08:38 PM.

08-21-2007, 10:50 PM	#18
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: Dual horns picture How long ago was that prg?



Register or Log In To remove these advertisements.

08-21-2007, 11:03 PM	#19
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Dual horns picture the easiest way to do it is........ have the hood raised and then have someone on the inside of the cab and mash the horn button and you will find em and when you pull that stunt make sure you have some aspirin __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

Register or Log In To remove these advertisements.