good Aftermarket 5.7 rods, $175 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 08-29-2007, 10:04 PM

this is a set of 8, Catpep brand rods. typical 350 Chevy size. they are bronze bushed on the small ends and are priced less than it would cost you to get yours resized and put good bolts in. these already have the high tensile bolts with small 12 point nuts and are factory balanced. Just didn't use them because they did not come pre-clearanced for a stroker motor and did not feel like grinding them. $175 plus shipping parcel post.

**crossy** · 09-14-2007, 03:58 PM

$ 165, crossy

CrashEd · 09-14-2007, 06:35 PM

Would you take 150 shipped to 62557.
Ed

BCOWANWHEELS · 09-14-2007, 07:28 PM

need h-beam rods for a stroker.

**crossy** · 09-16-2007, 10:52 AM

Quote:

Originally Posted by CrashEd

Would you take 150 shipped to 62557.
Ed

negative , thanx for the bump.

BCOWANWHEELS · 09-16-2007, 12:19 PM

that is a good lookin rod though. bet its stronger than a pink rod .........

CrashEd · 09-16-2007, 10:19 PM

What would shipping be to 62557. And would you be able to hold them tell the first of the month if i bought them.
Ed

67_C-30 · 09-16-2007, 10:50 PM

I have used those rods several engines and they are very good rods for the price. I built a 355 for my one of my buddie's '69 Nova with these and he has been running them with a 175HP Nitrous Works plate system for a few years now, and they've held up well. They are advertised to be up to 500HO and 7000RPM, and that's pretty much close to what my buddie's engine is.

**crossy** · 09-16-2007, 11:33 PM

If they are paid for they can sit here 2 weeks. i guess you are changing addresses???
shipping a 14# box would be $14.50 and i'll drop $4.50 off that and just say $185 shipped. thanx, crossy

Quote:

Originally Posted by CrashEd

What would shipping be to 62557. And would you be able to hold them tell the first of the month if i bought them.
Ed

**crossy** · 10-08-2007, 10:18 PM

todd(owner) says sell them so $175 INCLUDES shipping within 1500 miles of NJ. thanx , crossy

08-29-2007, 10:04 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	good Aftermarket 5.7 rods, $175 this is a set of 8, Catpep brand rods. typical 350 Chevy size. they are bronze bushed on the small ends and are priced less than it would cost you to get yours resized and put good bolts in. these already have the high tensile bolts with small 12 point nuts and are factory balanced. Just didn't use them because they did not come pre-clearanced for a stroker motor and did not feel like grinding them. $175 plus shipping parcel post. Attached Images __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 08-29-2007 at 10:05 PM.

09-14-2007, 03:58 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: good Aftermarket 5.7 rods, $175 $ 165, crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-14-2007, 06:35 PM	#3
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: good Aftermarket 5.7 rods, $175 Would you take 150 shipped to 62557. Ed

09-14-2007, 07:28 PM	#4
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: good Aftermarket 5.7 rods, $175 need h-beam rods for a stroker. __________________ I BELIEVE IN JOHN 3:16

09-16-2007, 12:19 PM	#6
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: good Aftermarket 5.7 rods, $175 that is a good lookin rod though. bet its stronger than a pink rod ......... __________________ I BELIEVE IN JOHN 3:16

09-16-2007, 10:19 PM	#7
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: good Aftermarket 5.7 rods, $175 What would shipping be to 62557. And would you be able to hold them tell the first of the month if i bought them. Ed

09-16-2007, 10:50 PM	#8
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: good Aftermarket 5.7 rods, $175 I have used those rods several engines and they are very good rods for the price. I built a 355 for my one of my buddie's '69 Nova with these and he has been running them with a 175HP Nitrous Works plate system for a few years now, and they've held up well. They are advertised to be up to 500HO and 7000RPM, and that's pretty much close to what my buddie's engine is. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

10-08-2007, 10:18 PM	#10
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: good Aftermarket 5.7 rods, $175 todd(owner) says sell them so $175 INCLUDES shipping within 1500 miles of NJ. thanx , crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.