saturdays work..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 09-02-2007, 10:22 AM

Got the firewall filled and done finally and the motor is back in..

FRENCHBLUE72 · 09-02-2007, 10:24 AM

few more.

lamar · 09-02-2007, 10:25 AM

Lookin Good!!!

FRENCHBLUE72 · 09-02-2007, 10:27 AM

motor is in ....whoo hoooo

stllookn · 09-02-2007, 12:06 PM

SWEET!!!! Nice progress! Are you going to paint the firewall with the engine in place?

FRENCHBLUE72 · 09-02-2007, 12:23 PM

Not sure when shes gonna get painted right now its just get the truck done and on the road paint will come later...

Fastfun · 09-02-2007, 12:53 PM

Looking good.

mtndewmaniac66 · 09-02-2007, 01:02 PM

Looks good! A lot of good work went into that firewall, just remember that primer is not a finish coat and oil can absorb, thus making it more difficult for your new paint to adhere to.
Sorry man, just hate to see all that good work go south.

72BlckButy · 09-02-2007, 10:56 PM

Great progress.... looks great!

wibilly · 09-03-2007, 04:12 PM

Quote:

Originally Posted by mtndewmaniac66

Looks good! A lot of good work went into that firewall, just remember that primer is not a finish coat and oil can absorb, thus making it more difficult for your new paint to adhere to.
Sorry man, just hate to see all that good work go south.

i agree even if your not gonna paint the whole truck now would be the time to paint the firewall jams and inside the cab. you will be glad you did

FRENCHBLUE72 · 09-03-2007, 04:24 PM

The firewall,inner fenders, and underside of the hood will be painted before the trip to reno but notheing else...

71Dragtruck · 09-03-2007, 04:35 PM

What make are those tubular front arms, and have any close up pics of the shock brackets to fit those car style shocks?

FRENCHBLUE72 · 09-03-2007, 10:23 PM

The arms upper and lower are from air ride tech they are the strong arms.. I got the hole kit from nathan porter of porterbuilt customs and the shocks and brackets came with the kit. If your thinking about the kit get it from nate..

71Dragtruck · 09-04-2007, 03:17 AM

Do they have a web page or contact info? Thanks!
I just checked the system out on Air rides site, looks like a real sweet setup but I can't run air bags. I couldn't tell from your pics that it was bagged, but still a very nice setup with the shock change over and double adjustables, would love that setup with coil overs.

brak · 09-04-2007, 04:59 AM

a couple other companies make tubular arms, belltech & CPP are the first that come to mind

FRENCHBLUE72 · 09-04-2007, 07:58 AM

www.porterbuiltstreetrods.com

09-02-2007, 10:22 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	saturdays work..... Got the firewall filled and done finally and the motor is back in.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2007, 10:24 AM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: saturdays work..... few more. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2007, 10:25 AM	#3
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Re: saturdays work..... Lookin Good!!! __________________ 72 C-10

09-02-2007, 10:27 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: saturdays work..... motor is in ....whoo hoooo Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2007, 12:06 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: saturdays work..... SWEET!!!! Nice progress! Are you going to paint the firewall with the engine in place? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-02-2007, 12:23 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: saturdays work..... Not sure when shes gonna get painted right now its just get the truck done and on the road paint will come later... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2007, 12:53 PM	#7
Fastfun Registered User Join Date: Jun 2005 Location: Scottsdale, AZ Posts: 615	Re: saturdays work..... Looking good.

09-02-2007, 01:02 PM	#8
mtndewmaniac66 Do the Dew! Join Date: May 2005 Location: Vernal, Utah Posts: 191	Re: saturdays work..... Looks good! A lot of good work went into that firewall, just remember that primer is not a finish coat and oil can absorb, thus making it more difficult for your new paint to adhere to. Sorry man, just hate to see all that good work go south.

09-02-2007, 10:56 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: saturdays work..... Great progress.... looks great! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-03-2007, 04:24 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: saturdays work..... The firewall,inner fenders, and underside of the hood will be painted before the trip to reno but notheing else... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-03-2007, 04:35 PM	#12
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: saturdays work..... What make are those tubular front arms, and have any close up pics of the shock brackets to fit those car style shocks? __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

09-03-2007, 10:23 PM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: saturdays work..... The arms upper and lower are from air ride tech they are the strong arms.. I got the hole kit from nathan porter of porterbuilt customs and the shocks and brackets came with the kit. If your thinking about the kit get it from nate.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-04-2007, 03:17 AM	#14
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: saturdays work..... Do they have a web page or contact info? Thanks! I just checked the system out on Air rides site, looks like a real sweet setup but I can't run air bags. I couldn't tell from your pics that it was bagged, but still a very nice setup with the shock change over and double adjustables, would love that setup with coil overs. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 09-04-2007 at 03:30 AM.

09-04-2007, 04:59 AM	#15
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: saturdays work..... a couple other companies make tubular arms, belltech & CPP are the first that come to mind __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 09-04-2007 at 05:06 AM.

09-04-2007, 07:58 AM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: saturdays work..... www.porterbuiltstreetrods.com __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.