1970 c20 for parts in Colorado Springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

otsenre · 09-12-2007, 09:24 PM

I have a 1970 c20, less engine and trans. Sold tailgate already, decent bed, air cab, was automatic,nice doors, all the suspension is there, nice hood, I will post pics later, as my camera went on strike

Daks · 09-12-2007, 10:13 PM

I know someone who might be intersted in the cab, depending on the shape of it...

Also, I am interested in the bed, depending on shape as well... How much?

otsenre · 09-12-2007, 10:47 PM

Quote:

Originally Posted by Daks

I know someone who might be intersted in the cab, depending on the shape of it...

Also, I am interested in the bed, depending on shape as well... How much?

750 for entire pickup, all it needs is engine and tranny, cab has rust on cab supports and r cab corner, bed is decent, has minor dings, no tailgate, but I have one off another pickup I could throw in.

otsenre · 09-13-2007, 06:46 PM

Quote:

Originally Posted by otsenre

750 for entire pickup, all it needs is engine and tranny, cab has rust on cab supports and r cab corner, bed is decent, has minor dings, no tailgate, but I have one off another pickup I could throw in.

Has rally wheels, with all trim rings and caps, this pickup just needs a engine and tranny and it will go, I would rather sell complete. Here are picsAttachment 299520

Attachment 299521

Attachment 299522

Attachment 299523

Attachment 299524

otsenre · 09-13-2007, 06:50 PM

Quote:

Originally Posted by otsenre

Has rally wheels, with all trim rings and caps, this pickup just needs a engine and tranny and it will go, I would rather sell complete. Here are picsAttachment 299520

Attachment 299521

Attachment 299522

Attachment 299523

Attachment 299524

moreAttachment 299526

Attachment 299527

Attachment 299528

Attachment 299529

49m · 09-13-2007, 06:54 PM

if you part i want the inner grill and the trim.

DieselEater · 09-13-2007, 07:27 PM

I'm interested in a few things on it.....If you part it out. I could pick up large parts if necessary. I would prefer to barter if you need anything?

glock35ipsc · 09-14-2007, 03:52 PM

Wow, that would make a real nice driver if someone had an engine and tranny!! Here's a free bump for ya.

otsenre · 09-15-2007, 03:16 PM

There has not been much interest in complete pickup, so parts it is, I will not ship any of big stuff!

49m · 09-15-2007, 03:57 PM

Inner grill and trim is what i want from it.

otsenre · 09-15-2007, 04:01 PM

Quote:

Originally Posted by 49m

Inner grill and trim is what i want from it.

To ship inner grill and trim, you are talking about the outer grill trim, right, 75.00 plus shipping, The last grill I shipped to east coast cost 84.00.

DieselEater · 09-15-2007, 08:05 PM

I just put a 68 SWB project truck in the classifieds section just in case you want to do some trading????

heavy71chevy · 09-15-2007, 09:40 PM

how much for both the door panels shipped to 29665..im real intrested in them
thanks,
Brandon

DieselEater · 09-15-2007, 11:22 PM

I'm interested in the whole body w/out frame and axles. Good title??

otsenre · 09-16-2007, 02:56 AM

Quote:

Originally Posted by DieselEater

I'm interested in the whole body w/out frame and axles. Good title??

Yes there is a title, but what will I do with just a frame here, why dont you buy the whole thing and you deal with the chassis! Make a trailer out of it, or?

otsenre · 09-16-2007, 02:57 AM

Quote:

Originally Posted by heavy71chevy

how much for both the door panels shipped to 29665..im real intrested in them
thanks,
Brandon

I will let you know as soon as I find out

67-72williso · 09-16-2007, 07:16 AM

Is that an original sliding back window or an aftermarket? Check the glove box door.
Thanks, Willis

71shortfleet · 09-16-2007, 07:23 AM

is this truck still around? what is missing? How much to ship it all to 93065?

HOTFUN · 09-16-2007, 09:27 AM

Is the dash cut for the radio and is the doors have any speaker holes? Could I get a picture of the glove box option list and the rusted floor areas? I would be interested in the entire truck. Thanks, Mark

otsenre · 09-16-2007, 11:37 AM

Quote:

Originally Posted by 67-72williso

Is that an original sliding back window or an aftermarket? Check the glove box door.
Thanks, Willis

I dont see anything on spid label so I assume its aftermarket, see pics

otsenre · 09-16-2007, 11:39 AM

Quote:

Originally Posted by 71shortfleet

is this truck still around? what is missing? How much to ship it all to 93065?

This truck needs engine and tranny, tailgate, you would have to call ytransport co, I am in 80910

otsenre · 09-16-2007, 11:42 AM

Quote:

Originally Posted by HOTFUN

Is the dash cut for the radio and is the doors have any speaker holes? Could I get a picture of the glove box option list and the rusted floor areas? I would be interested in the entire truck. Thanks, Mark

Has aftermarket radio, and yes I assume dash was cut, has speakers on doors, here are picsAttachment 300094

Attachment 300095

xshadow · 09-16-2007, 08:18 PM

wow for a whole truck that would make a good driver or a good start on a project. we see more rust here in VA

**68350** · 09-16-2007, 11:35 PM

Wow, that's creepy. That's my gmc's counterpart!! Only difference was motors. Yours says dark bronze, i think mine says gold, but it almost looks the same. Cool, and good luck

otsenre · 09-17-2007, 02:30 PM

I am going to make a trailer out of this 3/4 ton chassis and bed, anybody out there need one, 500.00

09-12-2007, 09:24 PM	#1
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	1970 c20 for parts in Colorado Springs I have a 1970 c20, less engine and trans. Sold tailgate already, decent bed, air cab, was automatic,nice doors, all the suspension is there, nice hood, I will post pics later, as my camera went on strike

09-12-2007, 10:13 PM	#2
Daks I like crayons Join Date: Feb 2005 Location: Colorado Springs, CO Posts: 80	Re: 1970 c20 for parts in Colorado Springs I know someone who might be intersted in the cab, depending on the shape of it... Also, I am interested in the bed, depending on shape as well... How much?

09-13-2007, 06:54 PM	#6
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 1970 c20 for parts in Colorado Springs if you part i want the inner grill and the trim.

09-13-2007, 07:27 PM	#7
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: 1970 c20 for parts in Colorado Springs I'm interested in a few things on it.....If you part it out. I could pick up large parts if necessary. I would prefer to barter if you need anything? __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

09-14-2007, 03:52 PM	#8
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: 1970 c20 for parts in Colorado Springs Wow, that would make a real nice driver if someone had an engine and tranny!! Here's a free bump for ya. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-15-2007, 03:16 PM	#9
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 1970 c20 for parts in Colorado Springs There has not been much interest in complete pickup, so parts it is, I will not ship any of big stuff!

09-15-2007, 03:57 PM	#10
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: 1970 c20 for parts in Colorado Springs Inner grill and trim is what i want from it.

09-15-2007, 08:05 PM	#12
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: 1970 c20 for parts in Colorado Springs I just put a 68 SWB project truck in the classifieds section just in case you want to do some trading???? __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

09-15-2007, 09:40 PM	#13
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: 1970 c20 for parts in Colorado Springs how much for both the door panels shipped to 29665..im real intrested in them thanks, Brandon __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

09-15-2007, 11:22 PM	#14
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: 1970 c20 for parts in Colorado Springs I'm interested in the whole body w/out frame and axles. Good title?? __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

09-16-2007, 07:16 AM	#17
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: 1970 c20 for parts in Colorado Springs Is that an original sliding back window or an aftermarket? Check the glove box door. Thanks, Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

09-16-2007, 07:23 AM	#18
71shortfleet Registered User Join Date: Oct 2005 Location: simi valley, ca. Posts: 20	Re: 1970 c20 for parts in Colorado Springs is this truck still around? what is missing? How much to ship it all to 93065?

09-16-2007, 09:27 AM	#19
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: 1970 c20 for parts in Colorado Springs Is the dash cut for the radio and is the doors have any speaker holes? Could I get a picture of the glove box option list and the rusted floor areas? I would be interested in the entire truck. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

09-16-2007, 08:18 PM	#23
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: 1970 c20 for parts in Colorado Springs wow for a whole truck that would make a good driver or a good start on a project. we see more rust here in VA

09-16-2007, 11:35 PM	#24
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1970 c20 for parts in Colorado Springs Wow, that's creepy. That's my gmc's counterpart!! Only difference was motors. Yours says dark bronze, i think mine says gold, but it almost looks the same. Cool, and good luck __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi



Register or Log In To remove these advertisements.

09-17-2007, 02:30 PM	#25
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 1970 c20 for parts in Colorado Springs I am going to make a trailer out of this 3/4 ton chassis and bed, anybody out there need one, 500.00

Register or Log In To remove these advertisements.