![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
never finish start another
Join Date: Mar 2007
Location: North Platte Nebraska
Posts: 432
|
hei spark plug question
What spark plug is used with a small block when it is converted to an hei dizzy? I know that the gape is also wider. What is recomended from users who have converted? This is going into a 307.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,553
|
Re: hei spark plug question
You can usually use a heat range colder and bump the gap up .010
|
![]() |
![]() |
![]() |
#3 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,646
|
Re: hei spark plug question
Can't recall which plugs I used, but they were same as stock... and yup, gap goes from .035 (stock) to .045 w/HEI
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2007
Location: Emporium,Pa
Posts: 248
|
Re: hei spark plug question
The PO had already upgraded to an HEI distributor on my 71. Im still running AC Delco plugs set at .35 without any problems, well not that many anyways.
![]()
__________________
"When you were born, you cried and the world rejoiced. Live your life so that when you die, the world cries and you rejoice." [Cherokee saying] 2001 Dodge Ram Sport 1500 4x4. (old ride) 1987 GMC V1500 Sierra Classic ("new" ride) |
![]() |
![]() |
![]() |
#5 |
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
Re: hei spark plug question
unless you lower the compression there is no reason to widen the gap. it takes more mJ to create the ionic field shrouding the contacts leaving less for the actual spark. and it effectively retards the timing.
leave it at .035 and go one step colder. |
![]() |
![]() |
![]() |
Bookmarks |
|
|