Tilt Column Accessories - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LIME69 · 09-13-2007, 10:59 PM

Will the chrome accessories for the 67-72 pickup columns fit the 70's van columns or do you have to buy can column parts? If so where?

71swb4x4 · 09-13-2007, 11:00 PM

They fit on the van tilts that I had.

1LIME69 · 09-13-2007, 11:01 PM

Thanks for the help.

71swb4x4 · 09-13-2007, 11:04 PM

Some people prefer the van tilt shifter, as it's quite a bit shorter than the truck shifter.

1LIME69 · 09-13-2007, 11:07 PM

But the indicator parts should work, correct?

71swb4x4 · 09-13-2007, 11:11 PM

I have no idea, someone will chime in.

Longhorn Man · 09-13-2007, 11:44 PM

yep, the parts for the perndl on a van are the same as a truck. *but the non tolt parts will not work*

muddpile · 09-20-2007, 08:11 PM

I had to shorten my truck tilt lever, as the thread was twice as long as a van tilt and had binding in the column. Easy job though. Everything else was bolt-on.

09-13-2007, 10:59 PM	#1
1LIME69 Registered User Join Date: Nov 2006 Location: Alexis, NC Posts: 182	Tilt Column Accessories Will the chrome accessories for the 67-72 pickup columns fit the 70's van columns or do you have to buy can column parts? If so where?

09-13-2007, 11:00 PM	#2
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Tilt Column Accessories They fit on the van tilts that I had. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-13-2007, 11:01 PM	#3
1LIME69 Registered User Join Date: Nov 2006 Location: Alexis, NC Posts: 182	Re: Tilt Column Accessories Thanks for the help.

09-13-2007, 11:04 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Tilt Column Accessories Some people prefer the van tilt shifter, as it's quite a bit shorter than the truck shifter. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-13-2007, 11:07 PM	#5
1LIME69 Registered User Join Date: Nov 2006 Location: Alexis, NC Posts: 182	Re: Tilt Column Accessories But the indicator parts should work, correct?

09-13-2007, 11:11 PM	#6
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Tilt Column Accessories I have no idea, someone will chime in. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-13-2007, 11:44 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Tilt Column Accessories yep, the parts for the perndl on a van are the same as a truck. but the non tolt parts will not work

09-20-2007, 08:11 PM	#8
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Tilt Column Accessories I had to shorten my truck tilt lever, as the thread was twice as long as a van tilt and had binding in the column. Easy job though. Everything else was bolt-on. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.