Anyone have pics of 325/50-15s on the back - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kelsfine69 · 09-21-2007, 11:47 PM

Im going from a 295/50-15 to a 325/50/15 and was wondering what they looked like. Thanks

Bob Moore · 09-22-2007, 06:38 PM

I have a pair of 315/50R15s on the rear. Mounted on 7 inch rallies. Sure wish they were at least 8's. I have no bed mounted so pics won't do much. It is very easy to take measurements however.

What brand are yours? Mine are "Big O" brand. Don't know if they are available or not. I got them at the junk yard for $10 each mounted on the rallies.

Mine are 12 wide, tread 10, height 31 1/2. Yours?

kelsfine69 · 09-23-2007, 11:53 AM

Im putting the Mickey Thompsons on. there about 28 X 13.50R15 on a 12 inch ralley

djracer · 09-23-2007, 12:16 PM

I use to run the 28x12.5 mickeys on my old 71 street truck. it was a wheel well full.

kelsfine69 · 09-23-2007, 11:58 PM

Any rubbing problems?

djracer · 09-24-2007, 07:53 AM

on a hard turn they would barely rub the stock inner fender!

kelsfine69 · 09-24-2007, 10:17 PM

I got lots of offset on my custom ralleys. I have 295s now with no rubbing issues. 325s are just taller right?

bad 71 chevy · 09-24-2007, 10:24 PM

i would really like to see what a 325 look like on our trucks i have a 295 and it looks good but never thought about going bigger what is the widest you can run with out tubbing the rear

70c10 · 09-24-2007, 10:41 PM

A board member in Texas with a big block, orange and white longbed posted pics awhile back of 325/50 or 325/60/15's (can't remember his name). Tires were E.T. streets.

kelsfine69 · 09-25-2007, 09:44 PM

Any one remember?? I have a week before I buy.

heavy71chevy · 09-25-2007, 11:45 PM

i dont but here ya go ttt

ratrod67 · 09-26-2007, 06:51 AM

Quote:

Originally Posted by 70c10

A board member in Texas with a big block, orange and white longbed posted pics awhile back of 325/50 or 325/60/15's (can't remember his name). Tires were E.T. streets.

That would be me.

http://67-72chevytrucks.com/vboard/s...d.php?t=231989

70c10 · 09-26-2007, 07:08 AM

There it is

. I was close considering this was posted 6 months ago

kelsfine69 · 09-30-2007, 11:02 PM

Ok got my new tires today. should get them mounted some time this week heres some pics

djracer · 09-30-2007, 11:32 PM

Sweet can't wait to see them mounted!

70c10 · 10-01-2007, 07:20 AM

Is your rear rim a 10" rim?. They look good!

kelsfine69 · 10-01-2007, 08:43 AM

Rim Has a extra 3" added to it

**Tom Vogel** · 10-01-2007, 10:36 AM

I have the 325 BF drag radials on my 2wd jimmy, got about 1/2" clearance on the fenderwells.

70c10 · 10-01-2007, 10:45 AM

Tom- any mods necessary?. What size rim?

EAST SIDE LOW LIFE · 10-01-2007, 11:13 AM

I like BF. Radial T/A's and was running P305 - 50 X 15's. Time to replace the backs and they are not made anymore! (could be just in Canada don't know.) So I ended up with BF.T/A's - P295 50 X 15's and I must say I'm very happy. In the width I lost 10 mil or about 1/2 inch over all not even enough to notice. A P325 50 X 15 will increase your width by 30 mil which will be around 2' to 2.5' inches which I think will create a rubbing problem in the stock wheel well. (IMHO)

esll.

kelsfine69 · 10-03-2007, 12:01 AM

Well I got them on, still have a good inch of clearance on the inside. And they hook really good too

corn · 10-03-2007, 12:10 AM

Sorry to hijack but do you have any close up pics of you ladder bars? Did you make them or are they Lakewoods?...

kelsfine69 · 10-03-2007, 06:55 PM

Quote:

Originally Posted by corn

Sorry to hijack but do you have any close up pics of you ladder bars? Did you make them or are they Lakewoods?...

Hand made

northerngmc · 10-03-2007, 09:58 PM

Quote:

Originally Posted by kelsfine69

I got lots of offset on my custom ralleys. I have 295s now with no rubbing issues. 325s are just taller right?

No they are not just taller......

295 is 295 mms wide and 325 would be 325 mms wide, therefore the new tires are 30mm or 3 cms wider.

They will be taller because the aspect ratio , the 50, stays the same. The 50 refers to the sidewall height in percent compared to the width. So the new tires are wider and taller.

By the way, I would love to get together some time and see your truck. I send 4 -6 weeks each summer about 15 mins SE of Leduc. I met Tim this summer and he was talking about getting a ride in your truck........

kelsfine69 · 10-03-2007, 11:20 PM

And he had nothing but bad things to say I bet

.

Sure man sounds like fun, Tim and I should be hooking up for a BBQ soon...

Oh and heres a ladder bar pic, only one i could find.

09-21-2007, 11:47 PM	#1
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Anyone have pics of 325/50-15s on the back Im going from a 295/50-15 to a 325/50/15 and was wondering what they looked like. Thanks __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-22-2007, 06:38 PM	#2
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Anyone have pics of 325/50-15s on the back I have a pair of 315/50R15s on the rear. Mounted on 7 inch rallies. Sure wish they were at least 8's. I have no bed mounted so pics won't do much. It is very easy to take measurements however. What brand are yours? Mine are "Big O" brand. Don't know if they are available or not. I got them at the junk yard for $10 each mounted on the rallies. Mine are 12 wide, tread 10, height 31 1/2. Yours? __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

09-23-2007, 11:53 AM	#3
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back Im putting the Mickey Thompsons on. there about 28 X 13.50R15 on a 12 inch ralley __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-23-2007, 12:16 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Anyone have pics of 325/50-15s on the back I use to run the 28x12.5 mickeys on my old 71 street truck. it was a wheel well full. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-23-2007, 11:58 PM	#5
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back Any rubbing problems? __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-24-2007, 07:53 AM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Anyone have pics of 325/50-15s on the back on a hard turn they would barely rub the stock inner fender! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-24-2007, 10:17 PM	#7
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back I got lots of offset on my custom ralleys. I have 295s now with no rubbing issues. 325s are just taller right? __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-24-2007, 10:24 PM	#8
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	Re: Anyone have pics of 325/50-15s on the back i would really like to see what a 325 look like on our trucks i have a 295 and it looks good but never thought about going bigger what is the widest you can run with out tubbing the rear __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

09-24-2007, 10:41 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anyone have pics of 325/50-15s on the back A board member in Texas with a big block, orange and white longbed posted pics awhile back of 325/50 or 325/60/15's (can't remember his name). Tires were E.T. streets. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-25-2007, 09:44 PM	#10
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back Any one remember?? I have a week before I buy. __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-25-2007, 11:45 PM	#11
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Anyone have pics of 325/50-15s on the back i dont but here ya go ttt __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

09-26-2007, 07:08 AM	#13
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anyone have pics of 325/50-15s on the back There it is . I was close considering this was posted 6 months ago __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-30-2007, 11:02 PM	#14
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back Ok got my new tires today. should get them mounted some time this week heres some pics Attached Images __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

09-30-2007, 11:32 PM	#15
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Anyone have pics of 325/50-15s on the back Sweet can't wait to see them mounted! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-01-2007, 07:20 AM	#16
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anyone have pics of 325/50-15s on the back Is your rear rim a 10" rim?. They look good! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

10-01-2007, 08:43 AM	#17
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back Rim Has a extra 3" added to it __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

10-01-2007, 10:36 AM	#18
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Anyone have pics of 325/50-15s on the back I have the 325 BF drag radials on my 2wd jimmy, got about 1/2" clearance on the fenderwells.

10-01-2007, 10:45 AM	#19
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Anyone have pics of 325/50-15s on the back Tom- any mods necessary?. What size rim? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-01-2007, 11:13 AM	#20
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Anyone have pics of 325/50-15s on the back I like BF. Radial T/A's and was running P305 - 50 X 15's. Time to replace the backs and they are not made anymore! (could be just in Canada don't know.) So I ended up with BF.T/A's - P295 50 X 15's and I must say I'm very happy. In the width I lost 10 mil or about 1/2 inch over all not even enough to notice. A P325 50 X 15 will increase your width by 30 mil which will be around 2' to 2.5' inches which I think will create a rubbing problem in the stock wheel well. (IMHO) esll. __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)

10-03-2007, 12:01 AM	#21
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back Well I got them on, still have a good inch of clearance on the inside. And they hook really good too Attached Images __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... Last edited by kelsfine69; 10-03-2007 at 12:04 AM.

10-03-2007, 12:10 AM	#22
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Anyone have pics of 325/50-15s on the back Sorry to hijack but do you have any close up pics of you ladder bars? Did you make them or are they Lakewoods?...

10-03-2007, 11:20 PM	#25
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Anyone have pics of 325/50-15s on the back And he had nothing but bad things to say I bet. Sure man sounds like fun, Tim and I should be hooking up for a BBQ soon... Oh and heres a ladder bar pic, only one i could find. Attached Images __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... Last edited by kelsfine69; 10-03-2007 at 11:24 PM.

Register or Log In To remove these advertisements.