The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-28-2007, 10:53 AM   #1
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Tire dilema. Need some help.

Currently my truck is running 235/75/15 now. I have a set of rallys that are 15x10. The tires on the rallys are 295/50/15. The rallys sit about 2 inches lower then the 235s on there now. That means when im on the freeway im going to be revving much higher along with being 2 inches lower.

I cant seem to find a tire that can get me the overall diameter that i need. I need a minimum of a 29" diameter tire to maintain what i have now. Not many tires want to fit over a 15x10 inch rim. The 295/50/15s have an overall diameter of 28"/ But when you put them on a 10 inch wide rim, that changes quite a bit...ahaha... I dont want to sell my rallys...

Any suggestions on tire size?? Its going on a 71 stepside.... Im just looking for some advice.
lyrikz is offline   Reply With Quote
Old 09-28-2007, 11:40 AM   #2
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: Tire dilema. Need some help.

Try & find a set of BFG's in 285-70-15. They'll work well on the 10's & have the height your wanting. The problem is it's a discontinued size so it will take some searching (but they're still out there).
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.

Last edited by SCOTI; 09-28-2007 at 11:40 AM.
SCOTI is offline   Reply With Quote
Old 09-28-2007, 11:44 AM   #3
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by SCOTI View Post
Try & find a set of BFG's in 285-70-15. They'll work well on the 10's & have the height your wanting. The problem is it's a discontinued size so it will take some searching (but they're still out there).
235/75/15 off the rim is 29"
295/50/15 off the rim is 28"

Well, you put those 295/50/15 on a ten inch rim and that 28" is a litlte smaller...

Id say its about 1.5" overall difference... THe truck seems to sit about 2 inches lower then it did.. I will get pics on here. I will look for a 285/70 right now....
lyrikz is offline   Reply With Quote
Old 09-28-2007, 11:47 AM   #4
Brad
Out of the carpool lane.
 
Brad's Avatar
 
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,672
Re: Tire dilema. Need some help.

Check The Tire Rack. www.tirerack.com
__________________

1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red
1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!)
2000 Honda VFR in the faster yellow!
2008 Husqvarna TE-610

1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

Brad is offline   Reply With Quote
Old 09-28-2007, 11:54 AM   #5
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by Brad View Post
Check The Tire Rack. www.tirerack.com
Well, i work for a goodyear store as a service manager... No one has anything for a 285/70/15. when i say no one, i mean
cooper tires
tire rack
discount tire
goodyear
LTR
republic
dunlop
pacemark
bluestreak.

HAHAH... Im going to just put the tires on and drive it.. The main concern is with the 235/75/15s currently on the vehicle, when on the freeway doing 65 im PEGGED out..... With these 295/50's on there i think doing 55 is going to be pushing it.
lyrikz is offline   Reply With Quote
Old 09-28-2007, 01:15 PM   #6
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
Re: Tire dilema. Need some help.

255/70/15's are what you need. That's I used to run them on my '78 GMC. They are 29.1" on a 8" rim, but I have run the on 10's, and they do fine. The tread width is around 10" so they are going to bow in a little. There just isn't a lot of wide tires in a 15" that measures much taller than 28".
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435
‘72 C-10 SWB , 350 4bbl, TH350
'69 C-10 SWB , 250 L6, 3 OTT
'69 GMC C3500, dump truck, 351 V6, NP435
'84 M1009 CUCV Military Blazer

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 09-28-2007, 01:27 PM   #7
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: Tire dilema. Need some help.

Quote:
Originally Posted by 67_C-30 View Post
255/70/15's are what you need. That's I used to run them on my '78 GMC. They are 29.1" on a 8" rim, but I have run the on 10's, and they do fine. The tread width is around 10" so they are going to bow in a little. There just isn't a lot of wide tires in a 15" that measures much taller than 28".
The 255-70's would be ideal heighth wise but that's stretching it on a 10" wheel. Will it fit? Sure it will, but it's not ideal. IMO, it would look better than a 295-50.

Does it have to be a 10" rear wheel? Run 8" wheels out back w/the 255-70's & you'll save some RPM's on the hwy & it will look good too.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 09-28-2007, 01:30 PM   #8
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
Re: Tire dilema. Need some help.

Quote:
Originally Posted by SCOTI View Post
The 255-70's would be ideal heighth wise but that's stretching it on a 10" wheel. Will it fit? Sure it will, but it's not ideal. IMO, it would look better than a 295-50.

Does it have to be a 10" rear wheel? Run 8" wheels out back w/the 255-70's & you'll save some RPM's on the hwy & it will look good too.

I agree it's pushing it on a 10" rim, but he already has the 10" rallys and he wants to use them.
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435
‘72 C-10 SWB , 350 4bbl, TH350
'69 C-10 SWB , 250 L6, 3 OTT
'69 GMC C3500, dump truck, 351 V6, NP435
'84 M1009 CUCV Military Blazer

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!

Last edited by 67_C-30; 09-28-2007 at 01:31 PM.
67_C-30 is offline   Reply With Quote
Old 09-28-2007, 01:43 PM   #9
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by SCOTI View Post
The 255-70's would be ideal heighth wise but that's stretching it on a 10" wheel. Will it fit? Sure it will, but it's not ideal. IMO, it would look better than a 295-50.

Does it have to be a 10" rear wheel? Run 8" wheels out back w/the 255-70's & you'll save some RPM's on the hwy & it will look good too.
Better then the 295 50?? Is that possible. Its the widest coolest looking thing ever. ahaha..

I have to go with the 10" rears. Thats what i have and i need to make that work... As a kid i have always wanted deep rallys on my classic if i ever got one and i finally got one...

I think the 265/70/15's will be even better... Thank you... I might have a set of those bad boys in stock.
lyrikz is offline   Reply With Quote
Old 09-28-2007, 02:00 PM   #10
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
Re: Tire dilema. Need some help.

Quote:
Originally Posted by lyrikz View Post
Better then the 295 50?? Is that possible. Its the widest coolest looking thing ever. ahaha..

I have to go with the 10" rears. Thats what i have and i need to make that work... As a kid i have always wanted deep rallys on my classic if i ever got one and i finally got one...

I think the 265/70/15's will be even better... Thank you... I might have a set of those bad boys in stock.
I know the feeling about deep wheels. My '69 C/10 is getting a set of 15X10 Torq Thrust D's with 275/60/15's on the rear. Rubber band tires on big ol gawky wheels just doesn't do it for me!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435
‘72 C-10 SWB , 350 4bbl, TH350
'69 C-10 SWB , 250 L6, 3 OTT
'69 GMC C3500, dump truck, 351 V6, NP435
'84 M1009 CUCV Military Blazer

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 09-28-2007, 02:04 PM   #11
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by 67_C-30 View Post
I know the feeling about deep wheels. My '69 C/10 is getting a set of 15X10 Torq Thrust D's with 275/60/15's on the rear. Rubber band tires on big ol gawky wheels just doesn't do it for me!
Ever since i was a kid i always remember two things about classics.. I loved rallys on big fat tires, and i loved the 396 badge... So when i was buying this truck seeing it came with a free set of 15x10 rallys with all the fixins i was sold.. Now i just need to find my 396 or 454 and im set. ahah.
lyrikz is offline   Reply With Quote
Old 09-28-2007, 02:13 PM   #12
mark's68
Registered User
 
Join Date: Aug 2007
Location: greenville,ms.
Posts: 47
Re: Tire dilema. Need some help.

I,m running 295/50/15 on 10'' wheels they are almost 27'' tall.
mark's68 is offline   Reply With Quote
Old 09-28-2007, 02:16 PM   #13
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by mark's68 View Post
I,m running 295/50/15 on 10'' wheels they are almost 27'' tall.
Ya, 27" is right.. With my 29" tire on the rear now, the truck is revvin hard to keep 65 on the freeway.. Now imagine putting the 27" on the rear... Be hard to keep 55 or so... Thats my dilema right now...


Now that im thinking about it... Isnt a 15x10 wheel on the front going to look kind of odd?? I might have to get a different rally for the front.. I dont like the front rims sticking out ya know...

I should just say **** it and get my 22" rears and 20" fronts and call it a day....
lyrikz is offline   Reply With Quote
Old 09-28-2007, 02:33 PM   #14
67_C-30
I have a radical idea!
 
67_C-30's Avatar
 
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
Re: Tire dilema. Need some help.

Quote:
Originally Posted by lyrikz View Post

I should just say **** it and get my 22" rears and 20" fronts and call it a day....


Just go with 295's and get an OD tranny!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435
‘72 C-10 SWB , 350 4bbl, TH350
'69 C-10 SWB , 250 L6, 3 OTT
'69 GMC C3500, dump truck, 351 V6, NP435
'84 M1009 CUCV Military Blazer

67 C-30 Turbodiesel build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=254096

My trucks
http://s226.photobucket.com/albums/d...ediafilter=all

Member of the 1-Ton Club!
67_C-30 is offline   Reply With Quote
Old 09-28-2007, 02:51 PM   #15
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by 67_C-30 View Post


Just go with 295's and get an OD tranny!
Well, the motor is an inline six with 3 speed manual on the floor right now... I will be getting motor and trans setup but not at least for a year im guessing....

Ahh crap.. I just looked at the front tires... Fronts now are 235/75/15 and the rally tires are 265/50/15.... Heres the specs on those
Results

Overall Diameter: 3.5" difference
Circumference: 11" differnce

Thats going to PANCAKE the front of my truck. ahaha... Anyone have a pic of a 15x10 front rim on our trucks???
lyrikz is offline   Reply With Quote
Old 09-28-2007, 06:18 PM   #16
gotchevys?
Registered User
 
gotchevys?'s Avatar
 
Join Date: Dec 2006
Location: Virginia
Posts: 118
Re: Tire dilema. Need some help.

I am going to be running into the same delimia on my 67. A buddy of mine gave me a set of 295/50/15s and I think they will be to short.

If you do some looking on summitracing.com they have sizes like,
295/60/15
295/65/15
315/60/15
325/50/15
345/55/15

I belive all of the sizes I've seen in these sizes are DOT Street Drag Radials from Hoosier, Mickey Thompson, Goodyear, BFGoodrich, and I think there was even on by Nitto. I'll probably go with something like these.
__________________
www.fatdaddieshotrods.com
gotchevys? is offline   Reply With Quote
Old 09-28-2007, 06:20 PM   #17
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: Tire dilema. Need some help.

what is the widest you could go on an 8 inch wheel I am running 275 60 15 now
sorry to jack the thread
Dave
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 09-28-2007, 08:46 PM   #18
bcanini
"Taste It"
 
bcanini's Avatar
 
Join Date: Aug 2006
Location: Keizer, Oregon
Posts: 280
Re: Tire dilema. Need some help.

Quote:
Originally Posted by lyrikz View Post
Well, the motor is an inline six with 3 speed manual on the floor right now... I will be getting motor and trans setup but not at least for a year im guessing....

Ahh crap.. I just looked at the front tires... Fronts now are 235/75/15 and the rally tires are 265/50/15.... Heres the specs on those
Results

Overall Diameter: 3.5" difference
Circumference: 11" differnce

Thats going to PANCAKE the front of my truck. ahaha... Anyone have a pic of a 15x10 front rim on our trucks???

Here ya go 15X10s all the way around 265/50/r15 front 295/50/r15 rear

I like the way it looks

B
Attached Images
  
__________________
71 Chevrolet short fleet Cheyenne air cab/tilt w buddy buckets pretty stock other wise.

2007 Silverado Crew with the MAX Pack and loaded
2007 CX-9
"Hopefully when I die.. my wife wont sell my stuff for what I said I paid for it"

It's easier to ask forgiveness than it is to ask permission.
bcanini is offline   Reply With Quote
Old 09-29-2007, 08:53 PM   #19
lyrikz
PITbut
 
lyrikz's Avatar
 
Join Date: Sep 2007
Location: monroe washington
Posts: 3,052
Re: Tire dilema. Need some help.

Quote:
Originally Posted by bcanini View Post
Here ya go 15X10s all the way around 265/50/r15 front 295/50/r15 rear

I like the way it looks

B
Ya, that basically is what mine looks like.. Mines lower and it rubs. Iam bagging this vehicle so i need a rim that will fit in the fender well. I am going to have to sell the rally rims/tires and just get a whole new setup. Little bummed about that.

Here is the finished rallys. Anyone need a set??? WIW?

lyrikz is offline   Reply With Quote
Old 02-02-2012, 07:11 PM   #20
HevyChevy42
Registered User
 
Join Date: Dec 2011
Location: GREENSBORO, NC
Posts: 5
Re: Tire dilema. Need some help.

Quote:
Originally Posted by lyrikz View Post
Better then the 295 50?? Is that possible. Its the widest coolest looking thing ever. ahaha..

I have to go with the 10" rears. Thats what i have and i need to make that work... As a kid i have always wanted deep rallys on my classic if i ever got one and i finally got one...

I think the 265/70/15's will be even better... Thank you... I might have a set of those bad boys in stock.
i just purchased some rallies, 15x8 in the front and 15x10 on the rear on my 87. The front tires are 255/70 and rear are 265/70... havent got the tires in yet but im praying the 265/70 will fit the 10's.
HevyChevy42 is offline   Reply With Quote
Old 02-02-2012, 09:09 PM   #21
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
Re: Tire dilema. Need some help.

Quote:
Originally Posted by HevyChevy42 View Post
i just purchased some rallies, 15x8 in the front and 15x10 on the rear on my 87. The front tires are 255/70 and rear are 265/70... havent got the tires in yet but im praying the 265/70 will fit the 10's.
Wow, knocking the dust off of this one. Check out 'Coker Tire'. They offer a 285-70-15 in the Silvertown line which is a BFG radial T/A & will work very well on a 10" wheel....

http://www.cokertire.com/brands/bf-g...blackwall.html
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 02-02-2012, 09:24 PM   #22
CC69Rat
Registered User
 
CC69Rat's Avatar
 
Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,212
Re: Tire dilema. Need some help.

Yeah, this one is old !

http://www.jegs.com/i/Coker-Tire/257...ductId=1123896

In stock and ready to go.
__________________
Chad

1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway*
1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy
1986 Silverado Short Fleet - Scarlet *Sold*
1985 Silverado Short Fleet *Sold*
2022 Jeep Gladiator Mojave
2001 Jeep Cherokee XJ 4x4 - Lifted, Built
1992 Jeep Cherokee XJ 4x4 - Lifted
2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)
CC69Rat is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com