Pics of bagged with stock trailing arms - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1sik7t2 · 10-12-2007, 04:26 PM

I AGREE WITH YOU EXCEPT IT'S GOODGUYS &&&& OR FATHERS FAULT MINE TOOK ME TO ALL THE SHOWS (GOODGUYS, WORLD OF WHEELS, ETC.) I SAW THE DARK GREEN AND SILVER BURB CALLED"SUBLOW" @ THE GOODGUYS SHOW IN DELMAR, CALIF **BLEW MY FRICKN MIND** NOW I HAVE ONE TO DO SOMETHING SIMILAR TO

Quote:

Originally Posted by gringoloco

Thanks for the props. Goodguys is to blame for this- while we were walking around, I kept thinking of how sweet the Blazer would look laid-out. Then my 'ol lady, as though reading my mind, says "You should do that to your Blazer"... Got home and immediately started ordering parts and tearing into it. I've taken a few more pics of my progress- I'll start a thread once I get a little further...

None whatsoever. I c-notched it and just wasn't happy. I want my ride height to be somewhere around where it was dumped before, maybe lower

Well, maybe one misgiving: I know what I'll be doing with my free time for the foreseeable future

**67 cst swb** · 10-12-2007, 11:32 PM

c10addict, jkade & N2TRUX...
You guys are killing me all 3 of your trucks in the same thread...
does anyone wanna buy a WHITE '68 Shortbox project? I really need to get my RED "next project" started...

JUST KIDDING on the Selling thing...
well until it's done, then it will be...

**N2TRUX** · 10-12-2007, 11:36 PM

Quote:

Originally Posted by 67 cst swb

If and when we do move back, it will be to the San Antonio area...
maybe spring 2009

You better buy land now. Land in that area has gone ballistic in the past few years.

IvelDesigns · 10-13-2007, 01:13 AM

good luck on your build. make sure to post lots of pic

bagged and c-notched with factory t-arms.... and red!

XXL · 10-17-2007, 10:26 PM

Stock trailing arms but substantial mods to get clearance (complete back-half).

Ride height, then dumped.

**67 cst swb** · 10-18-2007, 01:05 PM

XXL;
Vey nice... Love that stance.
Makes me lean towards making my project a stepside.
see link:
http://67-72chevytrucks.com/vboard/s...d.php?t=262587

jkade · 10-18-2007, 01:57 PM

Quote:

Originally Posted by XXL

Stock trailing arms but substantial mods to get clearance (complete back-half).

Ride height, then dumped.

I need to see some pics of the mods.

XXL · 10-18-2007, 02:00 PM

Quote:

Originally Posted by 67 cst swb

XXL;
Vey nice... Love that stance.
Makes me lean towards making my project a stepside.
see link:

Thanks. And we could use a few more stepsides around here. If you ever decide to go this low, the wheel/tire spacing in the rear gets verrrrrrrry tricky.

Quote:

Originally Posted by jkade

I need to see some pics of the mods.

There are lots of posts in various Suspension forum threads.

jkade · 10-18-2007, 02:08 PM

Quote:

Originally Posted by XXL

Thanks. And we could use a few more stepsides around here. If you ever decide to go this low, the wheel/tire spacing in the rear gets verrrrrrrry tricky.

There are lots of posts in various Suspension forum threads.

I was hoping to see some of the one done to that truck.
Thanks

XXL · 10-18-2007, 07:25 PM

Quote:

Originally Posted by jkade

I was hoping to see some of the one done to that truck.

So go look in the Suspension forum for my posts on the mods.

jkade · 10-18-2007, 07:35 PM

Quote:

Originally Posted by XXL

So go look in the Suspension forum for my posts on the mods.

Ok, I have been looking but didn't remember seeing that truck there. I guess I don't remember since you have painted it now.

jkade · 10-18-2007, 09:00 PM

Quote:

Originally Posted by XXL

So go look in the Suspension forum for my posts on the mods.

Ok, I looked at your threads and didn't see any of the rear suspension in your truck.

gringoloco · 10-19-2007, 03:10 PM

Look for the one called 'Snip-Snip'.

Robznob11 · 10-19-2007, 08:00 PM

3 in body drop is simple with a torch and it will drag fenders and bumper with bags and stock suspension, mine is static drop and when the bb is in the front bumper is only 5in off the ground rear is about 7" thats with 30 in tires

10-12-2007, 11:32 PM	#27
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: Pics of bagged with stock trailing arms c10addict, jkade & N2TRUX... You guys are killing me all 3 of your trucks in the same thread... does anyone wanna buy a WHITE '68 Shortbox project? I really need to get my RED "next project" started... JUST KIDDING on the Selling thing... well until it's done, then it will be... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

10-13-2007, 01:13 AM	#29
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Pics of bagged with stock trailing arms good luck on your build. make sure to post lots of pic bagged and c-notched with factory t-arms.... and red! Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

10-17-2007, 10:26 PM	#30
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: Pics of bagged with stock trailing arms Stock trailing arms but substantial mods to get clearance (complete back-half). Ride height, then dumped. Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

10-18-2007, 01:05 PM	#31
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: Pics of bagged with stock trailing arms XXL; Vey nice... Love that stance. Makes me lean towards making my project a stepside. see link: http://67-72chevytrucks.com/vboard/s...d.php?t=262587 __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

10-19-2007, 03:10 PM	#38
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Pics of bagged with stock trailing arms Look for the one called 'Snip-Snip'. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-19-2007, 08:00 PM	#39
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Pics of bagged with stock trailing arms 3 in body drop is simple with a torch and it will drag fenders and bumper with bags and stock suspension, mine is static drop and when the bb is in the front bumper is only 5in off the ground rear is about 7" thats with 30 in tires __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.