OK, got it home now whats it worth?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-22-2007, 02:02 PM

67 gmc CUSTOM, 1/2 V6 Automatic. Has ALL AC brackets, ALL PS brackets, has some rust in corners, rockers, doors rear cab mounts, bed is not good, pass drip edge, and one spot in cab above windshield. Front clip has no rust. Hood is bad but I have another for it. Has buddy buckets, speed warning, its all original but the paint job bascially. Has clear non highway title, which means you can get a title in your name for $10 here in Kansas. I know nothing about the motor or tranny. All I do know its a RARE truck being a 1/2 V6 with a auto, with AC, PS, Power brakes, speed warning and buddy buckets. I thinking about offering it for sale on the board first then going to Ebay if it doesn't sell here. I'm curious what you all think its worth, I know its rusty!!! Thanks Randy

teeitup · 10-22-2007, 02:04 PM

more pics

teeitup · 10-22-2007, 02:06 PM

more

teeitup · 10-22-2007, 02:11 PM

last

Brock · 10-22-2007, 02:40 PM

Well...From what I've seen on here and other places, it depends on where it is. If you try to sell it in Cali...it probably would be scrapped. In the NE area fairly high dollar, Canada even more. Mid-west...I'm from KY and I know a guy that bought one that was a plain-jane with probably MORE rust than that (rockers were completly gone, even the door sills), for $1500 (running) because it "had the steel bed". I paid $250 for my 68 stepper that doesn't run but has way less rust...

So...Anywhere from $150 as scrap to $4500 in the great North.

72BlckButy · 10-22-2007, 02:49 PM

Great save!

jorgensensc · 10-22-2007, 04:55 PM

I don't know what it's worth, but I'll give you 150.00 for the seats....... It was worth a try right?
Shawn

tclaremont · 10-22-2007, 05:09 PM

I have that same rear bumper. That makes our two the only ones I have ever seen. Of course, that does not necessarilly translate to valuable.

The seats are worth more than the rest of the truck, from what I can see, due to the desirability.

The scary part is that the rust is always worse than it looks, and the rust on that one looks pretty bad.

I think that truck would have a hard time bringing $300 in my neck of the woods.

67_C-30 · 10-22-2007, 05:12 PM

I'd love to have the drivetrain with ps and AC stuff.

thebrown83 · 10-22-2007, 05:26 PM

Try parting it out... you can probly get $150 for the seats, $200 for the front clip, and more for whatever anyone needs.

**michael bustamante** · 10-22-2007, 05:28 PM

I have the same exact bumper. ugly but it tows real good. I jerked a few tree stumps with it

68shortstep · 10-22-2007, 06:46 PM

Quote:

Originally Posted by michael bustamante

I have the same exact bumper. ugly but it tows real good. I jerked a few tree stumps with it

Rear bumper looks to me to be a typical dealer-installed version of what I call a "farmer-bumper."

Most all the older trucks here have them, heavy-plate steel, often with the dealer's name deeply embossed into it, and with the cut-notches near each side of the hitch ball area, to easy-quickly drop the trailer-hitch safety chains thru.

Not rare in the Midwest, I'd say.

VERY usable for towing & "real work-horse usage."

teeitup · 10-22-2007, 07:58 PM

Thanks for the input guys. I don't want to part it out, I'd like to sell it whole to keep it alive. I know approx what the parts will bring if I part. I'm just wanting to find out what its worth being all original truck with some rare options as a complete truck. Thanks Randy

HOTFUN · 10-22-2007, 09:07 PM

Randy
I know what your saying about saving her but I think it will part for far more than a complete V6 longbox GMC. If it gets to the parting please put me up front for a shot at all the dash items.
Mark

CG · 10-22-2007, 09:08 PM

Its unfortunate that a truck with lots of nice options is worth far more parting it out. If the body was better and it had a v8 then you would have yourself a prize.

teeitup · 10-24-2007, 11:46 PM

I know I'm just probably wishing it would stay whole, These are what some of the parts have been bringing, seats are bringing $350 plus, speed warning just brought $380 on ebay, V6 AC brackets and PS brackets with all pullies are rare probably comparable to BB prices, I seen a couple sets like that go for $400, I need to do some more checking on the V6 stuff though. Then I still have the front clip, and other parts I could sell. I'm going to keep it whole and hopefully I'll find someone who will be interested in it. Thanks Randy

*ksjh1316* · 10-24-2007, 11:51 PM

I thought you were going to be nice and throw all that stuff in the one I am interested in

I like that truck should sell if kept together good luck

rambler · 10-25-2007, 12:04 AM

am I reading this correctly? Randy wants to keep a truck whole and not wanting to part it out?

just kidding.. looks like a good rare find, but a lot of body work..

CG · 10-25-2007, 12:10 AM

I tried to give away a good running v6 like that and had no takers. A few weeks ago at a swap meet I sold a decent set of buddy buckets for 475.00. I have no idea what you paid for that truck but I bet you get close to 2 grand parting it out.

68GMCCustom · 10-25-2007, 12:55 AM

I sold a good running, complete 305E V6 a few weeks back for $350 with the ps, 3sp tranny, bell housing, linkages, and all. I'd think with that one having ps, plus a/c and the automatic too...would be worth the same or more... even if it didn't run.

**tkeduk8r** · 10-25-2007, 04:39 PM

wow.. neat truck... Keep it together.. we part enough of these things and that one is a neat find... I just bought a 72, so im out.. but a V6 GMC is SOOOOOOOO cool....I think an intellegent truck guy buyer would throw out 1000 for it... JMO... you have any pics of the SPID Randy????
--Mike

teeitup · 10-25-2007, 08:08 PM

Jeff, lol, sorry but none of thsi stuff goes with the truck your lookinf at, I should be able to get pics of it Wed after work. I just got back with another 67 with some nice stuff on it too!!!
Joe, lol, I'm trying to explain that
CG, thats what I'm thinking it will part out around there somewhere
68GMCCUSTOM, Thanks for that info, I was wondering what a motor would be worth
tkduk8r, Mike no spid, on it. It will part out for more than a $1000 easily, thats why I'd like to keep it whole
Thanks Randy

*ksjh1316* · 10-25-2007, 09:53 PM

Dang it thought you were going to be real nice

Let me know what options the other has we may have to do some upgrading to the other one. Looking at the pic of it it looks to have the grill of a 67-68 with the front fenders of a 69-72 am I

If I am right are there 2 good fenders for a 67 to swap out? I know asking a lot of questions early but you got my progect going a new direction and getting real excited. If it looks half as nice as it does in the pics my wife is going to kill me

teeitup · 10-25-2007, 10:03 PM

Jeff, its a 67 with 68 front fenders. 67 cab and good 67 bed, the rear coil fell out while I was loading it. I think the holder was trash. I'll get you some pics. I'll also work with you what part you'd need to get it going.

Thanks Randy

**jerry moss** · 10-25-2007, 11:07 PM

Randy,
take all the goodies and put them into a 67 shortbed 4x4, paint it solid red, add a few more options (tilt, tach, am/fm and some red shoulder belts and naturally, tow hooks) and that would be an awesome truck.
it's sad to say but that one is worth much more dead than alive. best of luck and it is a cool truck.

10-22-2007, 02:02 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	OK, got it home now whats it worth?? 67 gmc CUSTOM, 1/2 V6 Automatic. Has ALL AC brackets, ALL PS brackets, has some rust in corners, rockers, doors rear cab mounts, bed is not good, pass drip edge, and one spot in cab above windshield. Front clip has no rust. Hood is bad but I have another for it. Has buddy buckets, speed warning, its all original but the paint job bascially. Has clear non highway title, which means you can get a title in your name for $10 here in Kansas. I know nothing about the motor or tranny. All I do know its a RARE truck being a 1/2 V6 with a auto, with AC, PS, Power brakes, speed warning and buddy buckets. I thinking about offering it for sale on the board first then going to Ebay if it doesn't sell here. I'm curious what you all think its worth, I know its rusty!!! Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 10-22-2007 at 02:12 PM.

10-22-2007, 02:04 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? more pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2007, 02:06 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2007, 02:11 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? last Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2007, 02:40 PM	#5
Brock upgrading to an older model Join Date: Aug 2007 Location: Sacramento, KY Posts: 346	Re: OK, got it home now whats it worth?? Well...From what I've seen on here and other places, it depends on where it is. If you try to sell it in Cali...it probably would be scrapped. In the NE area fairly high dollar, Canada even more. Mid-west...I'm from KY and I know a guy that bought one that was a plain-jane with probably MORE rust than that (rockers were completly gone, even the door sills), for $1500 (running) because it "had the steel bed". I paid $250 for my 68 stepper that doesn't run but has way less rust... So...Anywhere from $150 as scrap to $4500 in the great North. __________________ 68 stepside, short-box, multi-colored (for now)

10-22-2007, 02:49 PM	#6
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: OK, got it home now whats it worth?? Great save! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-22-2007, 04:55 PM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: OK, got it home now whats it worth?? I don't know what it's worth, but I'll give you 150.00 for the seats....... It was worth a try right? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-22-2007, 05:09 PM	#8
tclaremont Registered User Join Date: Aug 2007 Location: Rochester, NY USA Posts: 70	Re: OK, got it home now whats it worth?? I have that same rear bumper. That makes our two the only ones I have ever seen. Of course, that does not necessarilly translate to valuable. The seats are worth more than the rest of the truck, from what I can see, due to the desirability. The scary part is that the rust is always worse than it looks, and the rust on that one looks pretty bad. I think that truck would have a hard time bringing $300 in my neck of the woods.

10-22-2007, 05:12 PM	#9
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: OK, got it home now whats it worth?? I'd love to have the drivetrain with ps and AC stuff. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

10-22-2007, 05:26 PM	#10
thebrown83 Registered User Join Date: Sep 2007 Location: Kingfisher OK Posts: 176	Re: OK, got it home now whats it worth?? Try parting it out... you can probly get $150 for the seats, $200 for the front clip, and more for whatever anyone needs.

10-22-2007, 05:28 PM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: OK, got it home now whats it worth?? I have the same exact bumper. ugly but it tows real good. I jerked a few tree stumps with it __________________ 1967custom

10-22-2007, 07:58 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? Thanks for the input guys. I don't want to part it out, I'd like to sell it whole to keep it alive. I know approx what the parts will bring if I part. I'm just wanting to find out what its worth being all original truck with some rare options as a complete truck. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2007, 09:07 PM	#14
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: OK, got it home now whats it worth?? Randy I know what your saying about saving her but I think it will part for far more than a complete V6 longbox GMC. If it gets to the parting please put me up front for a shot at all the dash items. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 10-22-2007 at 09:07 PM.

10-22-2007, 09:08 PM	#15
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,846	Re: OK, got it home now whats it worth?? Its unfortunate that a truck with lots of nice options is worth far more parting it out. If the body was better and it had a v8 then you would have yourself a prize.

10-24-2007, 11:46 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? I know I'm just probably wishing it would stay whole, These are what some of the parts have been bringing, seats are bringing $350 plus, speed warning just brought $380 on ebay, V6 AC brackets and PS brackets with all pullies are rare probably comparable to BB prices, I seen a couple sets like that go for $400, I need to do some more checking on the V6 stuff though. Then I still have the front clip, and other parts I could sell. I'm going to keep it whole and hopefully I'll find someone who will be interested in it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

10-24-2007, 11:51 PM	#17
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: OK, got it home now whats it worth?? I thought you were going to be nice and throw all that stuff in the one I am interested in I like that truck should sell if kept together good luck

10-25-2007, 12:04 AM	#18
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: OK, got it home now whats it worth?? am I reading this correctly? Randy wants to keep a truck whole and not wanting to part it out? just kidding.. looks like a good rare find, but a lot of body work.. __________________ No matter where you are..... There you are... Buckaroo Banzi

10-25-2007, 12:10 AM	#19
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,846	Re: OK, got it home now whats it worth?? I tried to give away a good running v6 like that and had no takers. A few weeks ago at a swap meet I sold a decent set of buddy buckets for 475.00. I have no idea what you paid for that truck but I bet you get close to 2 grand parting it out.

10-25-2007, 12:55 AM	#20
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: OK, got it home now whats it worth?? I sold a good running, complete 305E V6 a few weeks back for $350 with the ps, 3sp tranny, bell housing, linkages, and all. I'd think with that one having ps, plus a/c and the automatic too...would be worth the same or more... even if it didn't run. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-25-2007, 04:39 PM	#21
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: OK, got it home now whats it worth?? wow.. neat truck... Keep it together.. we part enough of these things and that one is a neat find... I just bought a 72, so im out.. but a V6 GMC is SOOOOOOOO cool....I think an intellegent truck guy buyer would throw out 1000 for it... JMO... you have any pics of the SPID Randy???? --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-25-2007, 08:08 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? Jeff, lol, sorry but none of thsi stuff goes with the truck your lookinf at, I should be able to get pics of it Wed after work. I just got back with another 67 with some nice stuff on it too!!! Joe, lol, I'm trying to explain that CG, thats what I'm thinking it will part out around there somewhere 68GMCCUSTOM, Thanks for that info, I was wondering what a motor would be worth tkduk8r, Mike no spid, on it. It will part out for more than a $1000 easily, thats why I'd like to keep it whole Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-25-2007, 09:53 PM	#23
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: OK, got it home now whats it worth?? Dang it thought you were going to be real nice Let me know what options the other has we may have to do some upgrading to the other one. Looking at the pic of it it looks to have the grill of a 67-68 with the front fenders of a 69-72 am I If I am right are there 2 good fenders for a 67 to swap out? I know asking a lot of questions early but you got my progect going a new direction and getting real excited. If it looks half as nice as it does in the pics my wife is going to kill me

10-25-2007, 10:03 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: OK, got it home now whats it worth?? Jeff, its a 67 with 68 front fenders. 67 cab and good 67 bed, the rear coil fell out while I was loading it. I think the holder was trash. I'll get you some pics. I'll also work with you what part you'd need to get it going. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-25-2007, 11:07 PM	#25
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,862	Re: OK, got it home now whats it worth?? Randy, take all the goodies and put them into a 67 shortbed 4x4, paint it solid red, add a few more options (tilt, tach, am/fm and some red shoulder belts and naturally, tow hooks) and that would be an awesome truck. it's sad to say but that one is worth much more dead than alive. best of luck and it is a cool truck. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

Register or Log In To remove these advertisements.