Bucket Seat Belts F/S-Ks. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-26-2007, 07:16 PM

These were bought for my '91 4x4 Burb but sold it recently before I got them installed. For bucket seat interior with console. Gray in color, inner or female portion only. Each seat belt stiffner has a very small split about 1/4" long. Not show but very nice for daily driver. Driver's stiffner has seat belt buzzer warning wire intact. $18.00 shipped.

**Ironhorse** · 11-01-2007, 08:41 PM

bump

**Ironhorse** · 11-07-2007, 05:01 PM

ttt, hard to find these when they're not broken or badly split. Nice with a VERY small split on each. Can be dyed to your color.

**Ironhorse** · 11-12-2007, 08:11 AM

last time ttt

RJGeister · 11-16-2007, 09:47 PM

Might be interested. Let me look at my 89 to ensure that they would fit.

Thanks,
Rich

**Ironhorse** · 11-16-2007, 10:21 PM

RJ, If you are talking an '89 Suburban I'm sure they will fit as the 'Burbs didn't change body and interior until '92. The '89 and '91 are the same. My brother-in-law just sold his '89 3/4 ton 'Burb recently and it was the same interior as the '91 'Burb I sold. Hope that helps.

RJGeister · 11-19-2007, 10:39 PM

Missed the part about the 1/4 in. crack. I will have to pass. Mine are in the same condition.

**Ironhorse** · 11-20-2007, 07:12 PM

RJ, the crack I mention is barely 1/4" in length, not 1/4" wide. May not have been clear on that. Would not be noticed at all when mounted between the seats. I can do a closer pic if needed. These are best I have seen in a long time, with not being snapped, these still stand straight on their own. Not pushing, just some more info I did not mention when posted these. If I had not sold my 'Burb I would be using these.

manfromeastvan · 11-30-2007, 07:01 PM

Any idea if these would fit a 1973 Blazer? I want to install a console, but without stiffeners, its going to be a pain in the a** to get the seat belts on. Thanks

**Ironhorse** · 11-30-2007, 07:31 PM

I honestly can't say for sure not knowing what original bucket seat belt stiffeners look like for a '73 Blazer. I would think they would work but you might post a question for the experts in the appropriate Blazer forum. Maybe someone has a pic loaded that will show.

10-26-2007, 07:16 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Bucket Seat Belts F/S-Ks. These were bought for my '91 4x4 Burb but sold it recently before I got them installed. For bucket seat interior with console. Gray in color, inner or female portion only. Each seat belt stiffner has a very small split about 1/4" long. Not show but very nice for daily driver. Driver's stiffner has seat belt buzzer warning wire intact. $18.00 shipped. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-02-2008 at 10:00 PM.

11-01-2007, 08:41 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Bucket Seat Belts F/S-Ks. bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-07-2007, 05:01 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Bucket Seat Belts F/S-Ks. ttt, hard to find these when they're not broken or badly split. Nice with a VERY small split on each. Can be dyed to your color. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-12-2007, 08:11 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Bucket Seat Belts F/S-Ks. last time ttt __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-16-2007, 09:47 PM	#5
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Bucket Seat Belts F/S-Ks. Might be interested. Let me look at my 89 to ensure that they would fit. Thanks, Rich

11-16-2007, 10:21 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Bucket Seat Belts F/S-Ks. RJ, If you are talking an '89 Suburban I'm sure they will fit as the 'Burbs didn't change body and interior until '92. The '89 and '91 are the same. My brother-in-law just sold his '89 3/4 ton 'Burb recently and it was the same interior as the '91 'Burb I sold. Hope that helps. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-19-2007, 10:39 PM	#7
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: Bucket Seat Belts F/S-Ks. Missed the part about the 1/4 in. crack. I will have to pass. Mine are in the same condition.

11-20-2007, 07:12 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Bucket Seat Belts F/S-Ks. RJ, the crack I mention is barely 1/4" in length, not 1/4" wide. May not have been clear on that. Would not be noticed at all when mounted between the seats. I can do a closer pic if needed. These are best I have seen in a long time, with not being snapped, these still stand straight on their own. Not pushing, just some more info I did not mention when posted these. If I had not sold my 'Burb I would be using these. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-30-2007, 07:01 PM	#9
manfromeastvan Registered User Join Date: Nov 2007 Location: Tempe, AZ Posts: 5	Re: Bucket Seat Belts F/S-Ks. Any idea if these would fit a 1973 Blazer? I want to install a console, but without stiffeners, its going to be a pain in the a** to get the seat belts on. Thanks

11-30-2007, 07:31 PM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Bucket Seat Belts F/S-Ks. I honestly can't say for sure not knowing what original bucket seat belt stiffeners look like for a '73 Blazer. I would think they would work but you might post a question for the experts in the appropriate Blazer forum. Maybe someone has a pic loaded that will show. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.