|
10-29-2007, 07:03 PM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: north carolina
Posts: 470
|
one peice windows
i am looking into buying one peice windows and i have been seeing that some of these will not fit aftermarket doors which is what mine are. so my question is what website or brand is the best to get that will fit an aftermarket door?
or should i just stick with the vent windows? |
|
|
|
10-29-2007, 07:41 PM
|
#2 |
|
Registered User
Join Date: Oct 2005
Location: Long Island
Posts: 9
|
Re: one peice windows
Im in the same market, like to here all the feedback .
|
|
|
|
|
10-30-2007, 08:34 AM
|
#3 | |
|
Junior Member
 
Join Date: Oct 2005
Location: LA
Posts: 158
|
Re: one peice windows
Quote:
__________________
1970 C-10 Fleet Side Gen IV 6.0 with 4L80E |
|
|
|
|
|
10-30-2007, 05:40 PM
|
#4 |
|
Registered User
Join Date: Oct 2007
Location: north carolina
Posts: 470
|
Re: one peice windows
come on some one has to have these on there truck
|
|
|
|
|
10-31-2007, 08:12 PM
|
#5 |
|
Junior Member
Join Date: Oct 2005
Location: LA
Posts: 158
|
Re: one peice windows
ttt
__________________
1970 C-10 Fleet Side Gen IV 6.0 with 4L80E |
|
|
|
|
10-31-2007, 10:38 PM
|
#6 |
|
Registered User
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
|
Re: one peice windows
well in my opinion if the aftermarket doors are that far off from oem they must not look very good on the truck,,any how i don't have them and i have oem doors but i thought i would post becuase i do not plan on shelling out 400 bones for a kit when a local glass guy will cut me both sides for 100 bucks im shure i can find some mild channel and a autoloc electric kit that will make them work for a lot less than the 300 left over and also most weather strip comes cut to fit so i don't think that will be a problem eather. id say make you a card board pattern and take it some where and get em cut out ,they will even soften the edges and everything .that 100 dollar quote was for glass im hopeing to get mine in lexan...
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS Last edited by Robznob11; 10-31-2007 at 10:40 PM. |
|
|
|
|
10-31-2007, 11:51 PM
|
#7 |
|
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: one peice windows
I have Goodmark doors and 1 piece windows... I hated the way the doors fit and cut them both apart at the top corner where the vent window would end and cut over 1/4 inch out and welded them back together... One of the windows in the kit would not fit, It was way to tight! Sooo I had to have one made.. After buying the kit and seeing what it consisted of I will make my next set.. The only thing that would be hard to find it the upper door slot seal... the one they provided fit like crap but I need to know where to get it!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
