Joined the Short Wheelbase Club *69 Tahoe Project* - Page 24 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 12-24-2007, 05:47 PM

Drivers side is 98% done. Still waiting on the correct bracket and another ebrake cable for the pass-side. BTW both cables are the same P/N even though NAPA calls out a driver and passenger side... The P/N I used is 94724 for both.

ebrake cable routing; the length is perfect for this configuration:

I'll add another clamp further forward on the trailing arm:

I need to get some new retainer clips, but I think the OE style will work perfectly here:

FRENCHBLUE72 · 12-25-2007, 03:55 AM

Looking damn good I see your getting the rain too... How much block do you have in the rear..

desertrat · 12-25-2007, 05:51 AM

This picture looks cool. I so much want to dislike big wheels but you guys sure make them look good.

Coming along nicely Frizzle!

babyblueoval · 12-25-2007, 05:55 AM

Frizzle,

I just realized that's the same tire I'm running, different size though (275/45x20).

Have you been able to put many miles on them yet? Just curious what you think.

They were recommended by Jim at the TireRack so I figured they'd be good.

Frizzle Fry · 12-25-2007, 11:18 AM

Quote:

Originally Posted by babyblueoval

Frizzle,

I just realized that's the same tire I'm running, different size though (275/45x20).

Have you been able to put many miles on them yet? Just curious what you think.

They were recommended by Jim at the TireRack so I figured they'd be good.

Not many miles on them yet but so far so good. Low road noise. There are pretty well rated in all the reviews.

gringoloco · 12-25-2007, 06:57 PM

Quote:

Originally Posted by babyblueoval

Frizzle,

I just realized that's the same tire I'm running, different size though (275/45x20).

Have you been able to put many miles on them yet? Just curious what you think.

They were recommended by Jim at the TireRack so I figured they'd be good.

Quote:

Originally Posted by Frizzle Fry

Not many miles on them yet but so far so good. Low road noise. There are pretty well rated in all the reviews.

Yoko Parada Spec-X on my Blazer. Nothing but good for me...

b&a72 · 12-26-2007, 05:19 AM

I am also running the Parada Spec X great tires. I have nothing but good things to say about Yoko's I run them on my 4 banger, and my Tahoe as well.

Rokcrln · 12-26-2007, 05:55 AM

Looking good! Heck with as small as those brakes look I bet you will be able to change pads with out removing the rim

Kevin
LFD Inc.

BACKYARD88 · 12-26-2007, 07:49 AM

Lol. Looks good, I LOVE big wheels

babyblueoval · 12-26-2007, 01:23 PM

Quote:

Originally Posted by gringoloco

Yoko Parada Spec-X on my Blazer. Nothing but good for me...

Quote:

Originally Posted by b&a72

I am also running the Parada Spec X great tires. I have nothing but good things to say about Yoko's I run them on my 4 banger, and my Tahoe as well.

Sounds like good recommendations to me.

I CAN'T WAIT TO GET MY TRUCK TOGETHER!!!!

**Hart_Rod** · 12-26-2007, 04:16 PM

FF, maybe I missed it, but how are you connecting the caliper to the brake lines? Is it a rubber line or a hard line? Thanks,

R/

Frizzle Fry · 12-26-2007, 05:46 PM

Just rerouted the OE hardline and used the thread adapters supplied in glock's bracket kit:

**Hart_Rod** · 12-26-2007, 06:50 PM

Thanks, I was just making sure. All my other cars that had rear discs used a rubber line to go from the caliper to the axle. Since it uses a hard line, I'm assuming that part of the caliper doesn't move.

R/

ElGracho · 12-26-2007, 08:31 PM

From that picture, that part of the caliper does move. I'd recommend getting some rubber or braided hose in there. It's a very small movement and might be ok, but you'd hate to work harden the steel and get a crack...

Frizzle Fry · 12-26-2007, 10:03 PM

Good call guys.

gringoloco · 12-28-2007, 07:24 AM

Quote:

Originally Posted by ElGracho

From that picture, that part of the caliper does move. I'd recommend getting some rubber or braided hose in there. It's a very small movement and might be ok, but you'd hate to work harden the steel and get a crack...

W3rd. That's a floater...

low burb · 12-28-2007, 06:17 PM

I've been trying to get the pics on page 1 and 2 for days now and all I get are red xs. Is any one else having the same problem? I can see the recent ones just not the earlier shots. Any one have a suggestion on how I can remedey this? Thanks, Michael

babyblueoval · 12-28-2007, 06:24 PM

Michael,

I'm good but there are about 50 pics on the first page alone.

Maybe your browser is timing out? Maybe a Ctrl/F5 will help or clear your temp files and try again.

Dunno. Might be worth a try.

Frizzle Fry · 12-28-2007, 07:09 PM

Here's the link to the photobucket account for the Burb. See subfolders on the left: http://s6.photobucket.com/albums/y23...69%20Suburban/

babyblueoval · 12-29-2007, 05:39 PM

Let's see, are you the one with the orange sweat shirt and matching hair?

I pictured you looking a bit older than that.

low burb · 12-29-2007, 07:20 PM

Thanks for the link, Mike. I can see clearly, now.....

67_C-30 · 12-29-2007, 08:02 PM

Quote:

Originally Posted by babyblueoval

Let's see, are you the one with the orange sweat shirt and matching hair?

I pictured you looking a bit older than that.

The name Frizzle Fry puts him at around 30-ish if I had to guess!

67_C-30 · 12-29-2007, 08:04 PM

BAM! I just checked the profile, and I was right! I'm guessing you were jamming to Primus in high school too!

Frizzle Fry · 12-30-2007, 09:30 AM

Quote:

Originally Posted by babyblueoval

Let's see, are you the one with the orange sweat shirt and matching hair?

I pictured you looking a bit older than that.

Actually that is a cloned version of me. I duplicated myself for those jobs where you need an extra hand. You know the saying; if you want something done right...

Quote:

Originally Posted by 67_C-30

BAM! I just checked the profile, and I was right! I'm guessing you were jamming to Primus in high school too!

yes sir! yes sir! I don't like your per-son-ality...

**Hart_Rod** · 12-30-2007, 10:26 AM

FF, just wondering what you figured out for the rear brake hoses?

R

12-24-2007, 05:47 PM	#576
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Joined the Short Wheelbase Club 69 Tahoe Project Drivers side is 98% done. Still waiting on the correct bracket and another ebrake cable for the pass-side. BTW both cables are the same P/N even though NAPA calls out a driver and passenger side... The P/N I used is 94724 for both. ebrake cable routing; the length is perfect for this configuration: I'll add another clamp further forward on the trailing arm: I need to get some new retainer clips, but I think the OE style will work perfectly here:

12-25-2007, 03:55 AM	#577
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Joined the Short Wheelbase Club 69 Tahoe Project Looking damn good I see your getting the rain too... How much block do you have in the rear.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-25-2007, 05:51 AM	#578
desertrat Registered User Join Date: Nov 2006 Location: Pahrump, NV Posts: 1,079	Re: Joined the Short Wheelbase Club 69 Tahoe Project This picture looks cool. I so much want to dislike big wheels but you guys sure make them look good. Coming along nicely Frizzle!

12-25-2007, 05:55 AM	#579
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Joined the Short Wheelbase Club 69 Tahoe Project Frizzle, I just realized that's the same tire I'm running, different size though (275/45x20). Have you been able to put many miles on them yet? Just curious what you think. They were recommended by Jim at the TireRack so I figured they'd be good. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

12-26-2007, 05:19 AM	#582
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Joined the Short Wheelbase Club 69 Tahoe Project I am also running the Parada Spec X great tires. I have nothing but good things to say about Yoko's I run them on my 4 banger, and my Tahoe as well.

12-26-2007, 05:55 AM	#583
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Joined the Short Wheelbase Club 69 Tahoe Project Looking good! Heck with as small as those brakes look I bet you will be able to change pads with out removing the rim Kevin LFD Inc.

12-26-2007, 07:49 AM	#584
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Joined the Short Wheelbase Club 69 Tahoe Project Lol. Looks good, I LOVE big wheels __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

12-26-2007, 04:16 PM	#586
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Joined the Short Wheelbase Club 69 Tahoe Project FF, maybe I missed it, but how are you connecting the caliper to the brake lines? Is it a rubber line or a hard line? Thanks, R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-26-2007, 05:46 PM	#587
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Joined the Short Wheelbase Club 69 Tahoe Project Just rerouted the OE hardline and used the thread adapters supplied in glock's bracket kit:

12-26-2007, 06:50 PM	#588
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Joined the Short Wheelbase Club 69 Tahoe Project Thanks, I was just making sure. All my other cars that had rear discs used a rubber line to go from the caliper to the axle. Since it uses a hard line, I'm assuming that part of the caliper doesn't move. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-26-2007, 08:31 PM	#589
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,551	Re: Joined the Short Wheelbase Club 69 Tahoe Project From that picture, that part of the caliper does move. I'd recommend getting some rubber or braided hose in there. It's a very small movement and might be ok, but you'd hate to work harden the steel and get a crack... __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

12-26-2007, 10:03 PM	#590
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Joined the Short Wheelbase Club 69 Tahoe Project Good call guys.

12-28-2007, 06:17 PM	#592
low burb Registered User Join Date: Jan 2001 Location: Medicine Hat,AB, Canada Posts: 194	Re: Joined the Short Wheelbase Club 69 Tahoe Project I've been trying to get the pics on page 1 and 2 for days now and all I get are red xs. Is any one else having the same problem? I can see the recent ones just not the earlier shots. Any one have a suggestion on how I can remedey this? Thanks, Michael __________________ Michael 1971 GMC Suburban "Crusty" 2000 GMC Sierra 1500 2wd 1978 Scout II 1992 Passat Syncro

12-28-2007, 06:24 PM	#593
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Joined the Short Wheelbase Club 69 Tahoe Project Michael, I'm good but there are about 50 pics on the first page alone. Maybe your browser is timing out? Maybe a Ctrl/F5 will help or clear your temp files and try again. Dunno. Might be worth a try. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver Last edited by babyblueoval; 12-28-2007 at 06:24 PM.

12-28-2007, 07:09 PM	#594
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Joined the Short Wheelbase Club 69 Tahoe Project Here's the link to the photobucket account for the Burb. See subfolders on the left: http://s6.photobucket.com/albums/y23...69%20Suburban/



Register or Log In To remove these advertisements.

12-29-2007, 05:39 PM	#595
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Joined the Short Wheelbase Club 69 Tahoe Project Let's see, are you the one with the orange sweat shirt and matching hair? I pictured you looking a bit older than that. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

12-29-2007, 07:20 PM	#596
low burb Registered User Join Date: Jan 2001 Location: Medicine Hat,AB, Canada Posts: 194	Re: Joined the Short Wheelbase Club 69 Tahoe Project Thanks for the link, Mike. I can see clearly, now..... __________________ Michael 1971 GMC Suburban "Crusty" 2000 GMC Sierra 1500 2wd 1978 Scout II 1992 Passat Syncro

12-29-2007, 08:04 PM	#598
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Joined the Short Wheelbase Club 69 Tahoe Project BAM! I just checked the profile, and I was right! I'm guessing you were jamming to Primus in high school too! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

12-30-2007, 10:26 AM	#600
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Joined the Short Wheelbase Club 69 Tahoe Project FF, just wondering what you figured out for the rear brake hoses? R __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-30-2007 at 10:27 AM.

Register or Log In To remove these advertisements.