how much would you pay? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 01-14-2003, 12:42 AM

How much are a pair of late 80's Blazer doors equiped with PW/PL, no rust/dents worth? The doors are in perfect shape and include EVERYTHING...windows, vent assemblies, and complete door panels with everything on them...basically EVERYTHING.

-Jeff

ocbaud · 01-14-2003, 12:44 AM

i got 18 bucks i'll buy them for! i want power windows and locks

ElGracho · 01-14-2003, 12:58 AM

Last pair I bought was $100. They had tan door panels though, so they weren't as good as they could have been.

bigblock73 · 01-14-2003, 01:01 AM

Aren't bare GM doors over $200 a piece now?

I am just curious to see what they would be worth...not what kind of deals you all have found (cause I sure can't), but what they would typically go for in this day and age.

Thanks - jeff

**Captkaos** · 01-14-2003, 11:37 AM

Typically here for full power doors they are $150 apiece and go up depending on the straightness. Manual doors max out about $80

bigblock73 · 01-14-2003, 11:16 PM

Well, here is a pic of what I purchased for Yeller. I paid $400 for both doors...pretty good deal considering i have seen non-power doors go for close to this much...especially up here in the rust belt. I have not received the doors yet but as soon as I get them I will be selling my non-power doors to help recover some of the cost.

-Jeff

ocbaud · 01-14-2003, 11:44 PM

my birthday is april 2nd

i'll trade you my doors for those.

i'm serious

bigblock73 · 01-15-2003, 12:21 AM

OK, but lets do it on April fools day instead!

-Jeff

ocbaud · 01-15-2003, 12:23 AM

Quote:

Originally posted by bigblock73
OK, but lets do it on April fools day instead!

-Jeff

come on man!! i'll throw in a free rear bumper, some rear bumpstops(minus the rivets) and a full exhaust system(2" pipes with dual cats)

bigblock73 · 01-15-2003, 12:27 AM

yuck...catalyc converters...

I take it you have non-power doors?

ocbaud · 01-15-2003, 12:41 AM

Quote:

Originally posted by bigblock73
yuck...catalyc converters...

I take it you have non-power doors?

i have no power doors

there are 6x9s' installed in the lower section of the door though

ocbaud · 01-15-2003, 12:41 AM

Quote:

Originally posted by bigblock73

I take it if you have non-power doors!

that looks much better

79Shortbox · 01-15-2003, 11:56 PM

Power doors? What does those do like...automatically open or something? Like them doors downtown at the market?

...never heard of no power doors...have heard of 'stuck manual windows suck' though!

arveetek · 01-16-2003, 12:08 AM

Jeff,

I paid $50 a piece for the power doors I installed on my '81. They were about in the same shape as yours, and also included the interior panels (which matched the rest of my interior). They had a slight amount of surface rust on the bottoms, and there was a small dent in one door that I didn't notice until it went to the paint shop. I got them from a local salvage yard.

Maybe these kind of doors are easier to find down here (southern Missouri)?

Of course, that was over 4 years ago, so prices have gone up, I'm sure. 73-87 parts are getting more rare every day that goes by.

This didn't help you any, I'm sure, but thought I'd share anyway!

bigblock73 · 01-16-2003, 12:20 AM

Casey, you would have better luck finding a two-headed chipmunk than finding any 73-87 body parts at a junkyard in Minnesota!! I have looked and looked to no avail...what made me real sick was when i was on e-bay there were a pair of door shells only that were up to close to $300 and there was still time on the auction!

Oh well, to me it is worth it and i can always sell my old doors and recover some of the money.

-Jeff

79Silv4x4 · 01-16-2003, 02:50 AM

I've paid as little as $50 and as much as $150.

78SilveradoSWB · 01-16-2003, 01:44 PM

I almost got some power equipped doors like those on Ebay awhile back, but before I could bid on them he took them off auction as he sold them locally, and he was from Portland! I would have paid $400 for them as they were new and perfect. I ended up buying the components and wiring harness (thanks to GMC Norton) and when I buy new door shells, I will have power!

01-14-2003, 12:42 AM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	how much would you pay? How much are a pair of late 80's Blazer doors equiped with PW/PL, no rust/dents worth? The doors are in perfect shape and include EVERYTHING...windows, vent assemblies, and complete door panels with everything on them...basically EVERYTHING. -Jeff

01-14-2003, 12:58 AM	#3
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Last pair I bought was $100. They had tan door panels though, so they weren't as good as they could have been. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

01-14-2003, 11:37 AM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Typically here for full power doors they are $150 apiece and go up depending on the straightness. Manual doors max out about $80 __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-14-2003, 11:16 PM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Well, here is a pic of what I purchased for Yeller. I paid $400 for both doors...pretty good deal considering i have seen non-power doors go for close to this much...especially up here in the rust belt. I have not received the doors yet but as soon as I get them I will be selling my non-power doors to help recover some of the cost. -Jeff Attached Images

01-16-2003, 12:08 AM	#14
arveetek Ultimate Diesel Dude Join Date: Oct 2002 Location: Southwest Missouri Posts: 328	Jeff, I paid $50 a piece for the power doors I installed on my '81. They were about in the same shape as yours, and also included the interior panels (which matched the rest of my interior). They had a slight amount of surface rust on the bottoms, and there was a small dent in one door that I didn't notice until it went to the paint shop. I got them from a local salvage yard. Maybe these kind of doors are easier to find down here (southern Missouri)? Of course, that was over 4 years ago, so prices have gone up, I'm sure. 73-87 parts are getting more rare every day that goes by. This didn't help you any, I'm sure, but thought I'd share anyway! __________________ Project truck: '81 C/20 converted to 6.2L TURBO DIESEL bored .040", gear drive, 6.5L injectors/pump, custom pistons, custom 4" exhaust, 700R4, 4.10's Daily Driver: '95 K1500 Tahoe, 6.5L TURBO DIESEL, NP241, 4L80E, 3.42's

01-14-2003, 12:44 AM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i got 18 bucks i'll buy them for! i want power windows and locks

01-14-2003, 01:01 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Aren't bare GM doors over $200 a piece now? I am just curious to see what they would be worth...not what kind of deals you all have found (cause I sure can't), but what they would typically go for in this day and age. Thanks - jeff

01-14-2003, 11:44 PM	#7
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	my birthday is april 2nd i'll trade you my doors for those. i'm serious

01-15-2003, 12:21 AM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	OK, but lets do it on April fools day instead! -Jeff

01-15-2003, 12:27 AM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	yuck...catalyc converters... I take it you have non-power doors?

01-15-2003, 11:56 PM	#13
79Shortbox Registered User Join Date: Jan 2003 Location: Pasadena, CA Posts: 28	Power doors? What does those do like...automatically open or something? Like them doors downtown at the market? ...never heard of no power doors...have heard of 'stuck manual windows suck' though!

01-16-2003, 12:20 AM	#15
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Casey, you would have better luck finding a two-headed chipmunk than finding any 73-87 body parts at a junkyard in Minnesota!! I have looked and looked to no avail...what made me real sick was when i was on e-bay there were a pair of door shells only that were up to close to $300 and there was still time on the auction! Oh well, to me it is worth it and i can always sell my old doors and recover some of the money. -Jeff

01-16-2003, 02:50 AM	#16
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	I've paid as little as $50 and as much as $150. __________________ 1979 K-10 Silverado (work in progress) 1991 V1500 Subruban 1999 Suburban LT 4x4 2006 Suburban LTZ (daily driver)

01-16-2003, 01:44 PM	#17
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	I almost got some power equipped doors like those on Ebay awhile back, but before I could bid on them he took them off auction as he sold them locally, and he was from Portland! I would have paid $400 for them as they were new and perfect. I ended up buying the components and wiring harness (thanks to GMC Norton) and when I buy new door shells, I will have power!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.