WTB - 2" Rear Lowering Blocks and U-Bolts for Coil Axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tcb-1 · 01-25-2008, 10:27 AM

looking for a 2" lowering block and u-bolt set up for a coil spring rear end that someone is not utilizing.

Thanks!!!

**LockDoc** · 01-25-2008, 02:53 PM

Doug,

If you can't come up with any you might try these folks. They are in Olathe, KS

http://www.generalspringkc.com/index...parent=32&pg=1

They should have what you want. (just type "blocks" into the search box and scroll down)

I just cut a couple of pieces of 2"x2"-1/4" wall tubing for mine, then had the spring company bend up new "U" bolts 2" longer... Worked great.

LockDoc

Blue_71 · 01-25-2008, 03:01 PM

i think i have a set of blocks, ill check tomarow and let you know. i dont think i have the u-bolts to go with them though

70GMCer · 01-25-2008, 09:11 PM

Found this today.......

http://cgi.ebay.com/ebaymotors/67-72...spagenameZWDVW

tcb-1 · 01-25-2008, 10:04 PM

Quote:

Originally Posted by Blue_71

i think i have a set of blocks, ill check tomarow and let you know. i dont think i have the u-bolts to go with them though

pm me if you still have the blocks only.

70GMCer,

I saw those blocks. Looks like he just made them out of .50" rect stock. That may be an option!!

jkade · 01-25-2008, 10:17 PM

Made mine out of some 2x6 tubing and work great.
These boys have the u bolts http://www.stengelbros.com/U-boltKits.htm

Blue_71 · 01-26-2008, 09:13 AM

heres the pics, they are 3" though. they could extremely easily be cut down. i managed to find one of the u-bolts, but after finding it i didnt bother finding the other... those suckers are thin! i ran these blocks in the rear of my k20 as lift blocks, but they were listed as lift/lowering blocks. they are the tapered kind to fix your pinion angle

tcb-1 · 01-26-2008, 10:08 AM

Quote:

Originally Posted by Blue_71

heres the pics, they are 3" though. they could extremely easily be cut down. i managed to find one of the u-bolts, but after finding it i didnt bother finding the other... those suckers are thin! i ran these blocks in the rear of my k20 as lift blocks, but they were listed as lift/lowering blocks. they are the tapered kind to fix your pinion angle

hummmm, I would have to drill two 1" holes through them right away, unless they fit between the 4.5" center to center u-bolt. I'd really like to stay with 2" drop, but thanks for thinking about me!!

01-25-2008, 10:27 AM	#1
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	WTB - 2" Rear Lowering Blocks and U-Bolts for Coil Axle looking for a 2" lowering block and u-bolt set up for a coil spring rear end that someone is not utilizing. Thanks!!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

01-25-2008, 02:53 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: WTB - 2" Rear Lowering Blocks and U-Bolts for Coil Axle Doug, If you can't come up with any you might try these folks. They are in Olathe, KS http://www.generalspringkc.com/index...parent=32&pg=1 They should have what you want. (just type "blocks" into the search box and scroll down) I just cut a couple of pieces of 2"x2"-1/4" wall tubing for mine, then had the spring company bend up new "U" bolts 2" longer... Worked great. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 01-25-2008 at 03:03 PM.

01-25-2008, 09:11 PM	#4
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: WTB - 2" Rear Lowering Blocks and U-Bolts for Coil Axle Found this today....... http://cgi.ebay.com/ebaymotors/67-72...spagenameZWDVW __________________ 1997 GMC Sierra Ext 1965 Mustang

01-25-2008, 10:17 PM	#6
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: WTB - 2" Rear Lowering Blocks and U-Bolts for Coil Axle Made mine out of some 2x6 tubing and work great. These boys have the u bolts http://www.stengelbros.com/U-boltKits.htm

01-26-2008, 09:13 AM	#7
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	Re: WTB - 2" Rear Lowering Blocks and U-Bolts for Coil Axle heres the pics, they are 3" though. they could extremely easily be cut down. i managed to find one of the u-bolts, but after finding it i didnt bother finding the other... those suckers are thin! i ran these blocks in the rear of my k20 as lift blocks, but they were listed as lift/lowering blocks. they are the tapered kind to fix your pinion angle Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.