progress and questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 01-16-2003, 04:05 PM

i got the cab off today and got my nos a-arms along with my drop springs. i also got my blazer gas tank in the mail,i was wondering does any one have pics of the installation? and or directions for me ? one more ting what are all the vent fittings for theres a couple. thanks everybody

**1971Stepside** · 01-16-2003, 04:09 PM

I think Wes has gas tank install directions on his web page. www.classicheartbeat.com

special70gmc · 01-16-2003, 04:09 PM

tank

special70gmc · 01-16-2003, 04:11 PM

sending unit

special70gmc · 01-16-2003, 04:12 PM

last

special70gmc · 01-16-2003, 08:41 PM

no one? i know lots of people have blazer tanks

blue_69 · 01-16-2003, 09:09 PM

I am just wondering where you are in ney york because i dont see snow in those pics and when i look out the window i see plenty of the s#*t.

**Classic Heartbeat** · 01-16-2003, 09:46 PM

The little vent next to the filler neck is for the filler tube vent. The one next to it is for the tank vent. You run a vent line with a brass filter up into the frame rail. The one on the other side of the tank is for the charcole cannister that sits up in the top front right corner of the truck, on the inside of the fender. As to installing the fuel sending unit, the easiest way to install it is to remove the metal ring on the tank first. BE SHURE THAT THE TOP SIDE REMAINS THE TOP SIDE.... Mark it if you have to. Then set the rubber "O" ring in the recessed spot that would be under the sending unit. Befor you set the sending unit in, I bend the grounding tab in about a 30deg. angle, then bend the part that the connector pushes onto in another 30 degrees. This will help with the instalation to follow. Slip the sending unit into the tank with the feed tube facing the filler side of the tank. The tube will look align with the groove molded in the tank under it. Then feed the lock ring over the sending unit untill it rests on top of it flat. Then you take the ring whitch you removed in the beginning, feed it on top of the whole works, and screw it back in place after you possition the lock ring with the little tabs next to the little protrusions on the top ring. Here is a picture of the sending unit installed. It is awfull small but it is as large as I can get it on this board. WES www.ClassicHeartbeat.com

polevault1977 · 01-16-2003, 11:37 PM

special70gmc,

If you could, I would like to know what the dimemsions of a blazer tank is? Thanks, Danny

special70gmc · 01-18-2003, 05:24 PM

ill check the dementions tonight, one more ? WES the straps that come with the tank do you happen to have a pic or anythin to show me how to bed them? -thanks

special70gmc · 01-19-2003, 02:04 PM

26 x 161/2 x 14 its got alot of indintations and its not totallty square but thats close, sorry i coulnn to any better

special70gmc · 01-19-2003, 02:06 PM

found this link i think it will be very helpful to me and any one else who has this tank http://www.low69cst.freeservers.com/Blazertank.htm

polevault1977 · 01-19-2003, 02:20 PM

Hey thanks for the dimensions! Still head scratchin' in Ok. Danny

01-16-2003, 04:05 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	progress and questions i got the cab off today and got my nos a-arms along with my drop springs. i also got my blazer gas tank in the mail,i was wondering does any one have pics of the installation? and or directions for me ? one more ting what are all the vent fittings for theres a couple. thanks everybody Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2003, 04:09 PM	#2
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	I think Wes has gas tank install directions on his web page. www.classicheartbeat.com __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

01-16-2003, 04:09 PM	#3
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	tank Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2003, 04:11 PM	#4
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	sending unit Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2003, 04:12 PM	#5
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	last Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2003, 08:41 PM	#6
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	no one? i know lots of people have blazer tanks __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-16-2003, 09:09 PM	#7
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	I am just wondering where you are in ney york because i dont see snow in those pics and when i look out the window i see plenty of the s#*t. __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

01-16-2003, 09:46 PM	#8
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	The little vent next to the filler neck is for the filler tube vent. The one next to it is for the tank vent. You run a vent line with a brass filter up into the frame rail. The one on the other side of the tank is for the charcole cannister that sits up in the top front right corner of the truck, on the inside of the fender. As to installing the fuel sending unit, the easiest way to install it is to remove the metal ring on the tank first. BE SHURE THAT THE TOP SIDE REMAINS THE TOP SIDE.... Mark it if you have to. Then set the rubber "O" ring in the recessed spot that would be under the sending unit. Befor you set the sending unit in, I bend the grounding tab in about a 30deg. angle, then bend the part that the connector pushes onto in another 30 degrees. This will help with the instalation to follow. Slip the sending unit into the tank with the feed tube facing the filler side of the tank. The tube will look align with the groove molded in the tank under it. Then feed the lock ring over the sending unit untill it rests on top of it flat. Then you take the ring whitch you removed in the beginning, feed it on top of the whole works, and screw it back in place after you possition the lock ring with the little tabs next to the little protrusions on the top ring. Here is a picture of the sending unit installed. It is awfull small but it is as large as I can get it on this board. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:47 PM.

01-16-2003, 11:37 PM	#9
polevault1977 Pick'n up the pieces! Join Date: Sep 2002 Location: Marietta, Oklahoma Posts: 198	special70gmc, If you could, I would like to know what the dimemsions of a blazer tank is? Thanks, Danny

01-18-2003, 05:24 PM	#10
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	ill check the dementions tonight, one more ? WES the straps that come with the tank do you happen to have a pic or anythin to show me how to bed them? -thanks __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-19-2003, 02:04 PM	#11
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	26 x 161/2 x 14 its got alot of indintations and its not totallty square but thats close, sorry i coulnn to any better __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-19-2003, 02:06 PM	#12
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	found this link i think it will be very helpful to me and any one else who has this tank http://www.low69cst.freeservers.com/Blazertank.htm __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

01-19-2003, 02:20 PM	#13
polevault1977 Pick'n up the pieces! Join Date: Sep 2002 Location: Marietta, Oklahoma Posts: 198	Hey thanks for the dimensions! Still head scratchin' in Ok. Danny



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.