WIW?? 1969 1/2 ton rear diff 4.10 posi. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BarryB · 01-29-2008, 11:00 AM

I am looking at a posi rearend . It's a 69 model so it is a coil sprung 6 lug set up. So i really would like to know what is a good price to pay for it.

**uncle** · 01-29-2008, 11:25 AM

For buying, I would say anything less than $150 is decent. I'm assuming the gears and carrier are useable. The 4:10 gear might hurt it some.

HavinSomeFun · 01-29-2008, 11:54 AM

around here they are $4-500 for the ones I have found.

billsbowtie · 01-29-2008, 11:58 AM

i sold my last one for $200.00.
did you get your center caps at tims?

whatnow123 · 01-29-2008, 01:05 PM

wow, those are bargins. I would say between 400 and 500 since a posi unit alone is 400 and another 100 for the install kit.

meathead95 · 01-29-2008, 09:41 PM

ive been getting 250 for used ones

70rs/ss · 01-30-2008, 12:56 AM

I sold one for $500, so if you can get it for $100-300 its a deal. 4:11's are desirable for an OD trans or a race type application, also helps if you are running some rubber.

masterbeavis · 01-30-2008, 01:48 AM

In areas where self service junkyards are common, I have a hard time getting anything more than $200 for most rear ends, unless there is something special in them. If I ask too much money, they know they can go to the same place I went to and buy the same axle for less.

msgross · 01-30-2008, 01:58 AM

I paid $35 for mine at a u-pull-it but that was a junkyard score...

$250 and up would be a good price for a guy wanting one.

BarryB · 01-30-2008, 01:48 PM

Yes Bill I got the caps from Tim.
Thanks for dropping them off.

corn · 01-30-2008, 02:29 PM

Quote:

Originally Posted by BarryB

It's a 69 model so it is a coil sprung 6 lug set up.

Not necessarily, mine is leaf...

**tnblazerk5** · 01-30-2008, 02:44 PM

Quote:

Originally Posted by corn

Not necessarily, mine is leaf...

been a bunch of leaf spring trucks popin up around here lattly

BarryB · 01-31-2008, 02:11 AM

Ok but I am pretty sure it is coil springs if not I might let it set.

01-29-2008, 11:00 AM	#1
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	WIW?? 1969 1/2 ton rear diff 4.10 posi. I am looking at a posi rearend . It's a 69 model so it is a coil sprung 6 lug set up. So i really would like to know what is a good price to pay for it. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

01-29-2008, 11:25 AM	#2
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. For buying, I would say anything less than $150 is decent. I'm assuming the gears and carrier are useable. The 4:10 gear might hurt it some.

01-29-2008, 11:54 AM	#3
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. around here they are $4-500 for the ones I have found. __________________ a green one with some stuff done to it....

01-29-2008, 11:58 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. i sold my last one for $200.00. did you get your center caps at tims? __________________ i have 67/72 chevy truck parts f/s.

01-29-2008, 01:05 PM	#5
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. wow, those are bargins. I would say between 400 and 500 since a posi unit alone is 400 and another 100 for the install kit. __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

01-29-2008, 09:41 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. ive been getting 250 for used ones __________________ 72 2wd blazer 72 swb 4x4

01-30-2008, 12:56 AM	#7
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. I sold one for $500, so if you can get it for $100-300 its a deal. 4:11's are desirable for an OD trans or a race type application, also helps if you are running some rubber.

01-30-2008, 01:48 AM	#8
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. In areas where self service junkyards are common, I have a hard time getting anything more than $200 for most rear ends, unless there is something special in them. If I ask too much money, they know they can go to the same place I went to and buy the same axle for less. __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

01-30-2008, 01:58 AM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. I paid $35 for mine at a u-pull-it but that was a junkyard score... $250 and up would be a good price for a guy wanting one. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-30-2008, 01:48 PM	#10
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. Yes Bill I got the caps from Tim. Thanks for dropping them off. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

01-31-2008, 02:11 AM	#13
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: WIW?? 1969 1/2 ton rear diff 4.10 posi. Ok but I am pretty sure it is coil springs if not I might let it set. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.