72 1 ton longhorn now!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-31-2008, 10:49 AM

Randy, tee-shirt wheather!! You should come up here tonight. -22 right now and the wind is howling. -45 to -55 windchills tonight and tomorrow.
Anyhow, are the emblems "custom/30"? If so, i will take them if the studs are good. You can start another pile for me if you have more trucks coming in... We can figure shipping later if that is ok with you. Thanks, Eric

teeitup · 01-31-2008, 11:21 AM

Eric, I'm just a WUSS you know that, from meeting me in person!!!

They look like the studs are still on them. I'll set them back for you. I've got 10 others bought, 6 are mostly parted, I'll just get a few things off them then haul them to scrap, the 4 others have more parts on them. They came from a junkyard about 20 miles form me, he started crushing and I got lucky enough he remembered to call me before he crushed these, atleast I hope I was lucky

Thanks Randy

**D.PASSMORE** · 01-31-2008, 01:26 PM

Thanks Randy - I've got some good leads on all the parts that I need.

Prathbun · 02-01-2008, 05:05 AM

Randy,

I'll take the PS pump and the HEI. PM sent.

Thanks!!!

Garage Freak · 02-01-2008, 12:10 PM

Randy,

What is the rear ratio? Are the fronts disc or drum? Need boster and proportioning valve if disc. Thanks, Kirt

teeitup · 02-02-2008, 02:30 AM

D.passmore, David, glad you found your stuff
Prathbun, Perry, shipped out today
Garage Freak, Kirt, yes its disc brake front end, $50 for complete booster. I haven't pulled cover to find out rearend ratio yet, I got 4 or 5 other 3/4 trucks coming in soon, what ratio you wanting?
Thanks Randy

Garage Freak · 02-02-2008, 02:52 AM

Randy,

I'll take the booster with prop valve.

Anything less than the 4:10 I currently have such as 3.73.

Possibly I can come out one of these Saturdays if you're around.

Thanks, Kirt

Garage Freak · 02-02-2008, 12:37 PM

I didn't catch it the first time.... Pull the cover??? Just need to count the # of revolutions of the drive shaft to one revolution of the wheel.

Walts_restoration · 02-02-2008, 12:43 PM

Ill try to head up to you this weekend randy, if your coming to lawrence too that would work.

teeitup · 02-02-2008, 10:26 PM

Kirt, I'll get the booster off and sit it back for you. I've doen the way you say to check ratio, but anymore I pull the cover and get the numbers off them.
Walts, Ryan, I won't be around Sat, hauling trucks, Sunday around noon will be the only time I'm here this weekend
Thanks Randy

Walts_restoration · 02-03-2008, 07:05 AM

we will work something out, think your driving by anytime soon? if so i could just paypal and you could dropoff on your way by.

teeitup · 02-03-2008, 11:46 AM

Hey Ryan, not headed to Lawrence anytime soon, I'll set them on the shelf for you. I got one old truck home tonight, not much on it though. I'm getting 3 tomorrow. Then a one about everyday next week hopefully. Thanks Randy

Walts_restoration · 02-03-2008, 11:48 AM

anything off my wishlist?? haha

toomanytoyz · 02-03-2008, 04:03 PM

Randy is the Carb Good on That Truck< Would it Fit on a 250 6 Cylinder????
Ever Get Cargo Light Yet?

Thanks, Rick

teeitup · 02-04-2008, 01:55 PM

Ryan, Not a whole lot of parts left on them
Rick, I'm not sure if that carb will fit on a 6 cyl or not, I don't do much carb switching. Sorry no cargo light yet
Thanks Randy

c-mack · 02-05-2008, 01:52 AM

how much would you take for the steering wheel to 75851 ?

thanks

colby

teeitup · 02-05-2008, 01:33 PM

Colby, it has quite a few cracks in it. $10 plus shipping. Thanks Randy

teeitup · 02-07-2008, 01:53 PM

ttt, this thing is is getting parted this weekend and headed to scrap first of the week. Ask if you see something you need. Thanks Randy

RicksTrucks · 02-07-2008, 02:07 PM

Quote:

Originally Posted by teeitup

Rick, Its good shape as far as I can tell, no rust on front cup at all, I'll get it off and check the rear part on the inside where it rust sometimes. I got some others off other trucks up here too. I haven't got ahold of the guy with the cab yet, sorry
Thanks Randy

Did you ever check out the fender(s) for me?

teeitup · 02-07-2008, 10:35 PM

I haven't got it off yet Rick, as I said above it looks good, the only place I have to check is inside rear bottom for rust. And also I got others up here already off. Thanks Randy

sakohntr · 02-11-2008, 07:25 AM

pm sent

b.sharp · 02-11-2008, 08:16 AM

Randy,

I need the radio ash tray (center section of a dash) this one or any other one. Someone cut the ashtray out of my burb and I need a panel to fix it. I would take the hole center sectio so I can graft it in at seams. Please let me know price shipped to 40601 KY.

Thanks,

Bryan

teeitup · 02-11-2008, 09:03 AM

Sakohntr, Bruce pm'd you back
B.Sharp, Bryan, I get $20 plus shipping for center sections of dashes.
Thanks let me know, Randy

teeitup · 02-11-2008, 09:04 AM

Rickstrucks, fender is good 2 small dings on front cup, no rust. All chrome and emblems are off it. Thanks Randy

**KSCHEVYUP** · 02-11-2008, 10:13 PM

Randy-
Are the bed mounting brackets that go on the frame in good condition? (not rusted through) And how much?
I need all the mounts to put a longhorn bed on my 1 ton cab chassis as mine has a utility bed on it and different mounts.

01-31-2008, 10:49 AM	#26
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,810	Re: 72 1 ton longhorn now!!! Randy, tee-shirt wheather!! You should come up here tonight. -22 right now and the wind is howling. -45 to -55 windchills tonight and tomorrow. Anyhow, are the emblems "custom/30"? If so, i will take them if the studs are good. You can start another pile for me if you have more trucks coming in... We can figure shipping later if that is ok with you. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-31-2008, 11:21 AM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Eric, I'm just a WUSS you know that, from meeting me in person!!! They look like the studs are still on them. I'll set them back for you. I've got 10 others bought, 6 are mostly parted, I'll just get a few things off them then haul them to scrap, the 4 others have more parts on them. They came from a junkyard about 20 miles form me, he started crushing and I got lucky enough he remembered to call me before he crushed these, atleast I hope I was lucky Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2008, 01:26 PM	#28
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: 72 1 ton longhorn now!!! Thanks Randy - I've got some good leads on all the parts that I need.

02-01-2008, 05:05 AM	#29
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: 72 1 ton longhorn now!!! Randy, I'll take the PS pump and the HEI. PM sent. Thanks!!!

02-01-2008, 12:10 PM	#30
Garage Freak Registered User Join Date: Oct 2007 Location: Roswell, GA Posts: 43	Re: 72 1 ton longhorn now!!! Randy, What is the rear ratio? Are the fronts disc or drum? Need boster and proportioning valve if disc. Thanks, Kirt

02-02-2008, 02:30 AM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! D.passmore, David, glad you found your stuff Prathbun, Perry, shipped out today Garage Freak, Kirt, yes its disc brake front end, $50 for complete booster. I haven't pulled cover to find out rearend ratio yet, I got 4 or 5 other 3/4 trucks coming in soon, what ratio you wanting? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-02-2008, 02:52 AM	#32
Garage Freak Registered User Join Date: Oct 2007 Location: Roswell, GA Posts: 43	Re: 72 1 ton longhorn now!!! Randy, I'll take the booster with prop valve. Anything less than the 4:10 I currently have such as 3.73. Possibly I can come out one of these Saturdays if you're around. Thanks, Kirt

02-02-2008, 12:37 PM	#33
Garage Freak Registered User Join Date: Oct 2007 Location: Roswell, GA Posts: 43	Re: 72 1 ton longhorn now!!! I didn't catch it the first time.... Pull the cover??? Just need to count the # of revolutions of the drive shaft to one revolution of the wheel.

02-02-2008, 12:43 PM	#34
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 72 1 ton longhorn now!!! Ill try to head up to you this weekend randy, if your coming to lawrence too that would work. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-02-2008, 10:26 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Kirt, I'll get the booster off and sit it back for you. I've doen the way you say to check ratio, but anymore I pull the cover and get the numbers off them. Walts, Ryan, I won't be around Sat, hauling trucks, Sunday around noon will be the only time I'm here this weekend Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-03-2008, 07:05 AM	#36
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 72 1 ton longhorn now!!! we will work something out, think your driving by anytime soon? if so i could just paypal and you could dropoff on your way by. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-03-2008, 11:46 AM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Hey Ryan, not headed to Lawrence anytime soon, I'll set them on the shelf for you. I got one old truck home tonight, not much on it though. I'm getting 3 tomorrow. Then a one about everyday next week hopefully. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-03-2008, 11:48 AM	#38
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: 72 1 ton longhorn now!!! anything off my wishlist?? haha __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

02-03-2008, 04:03 PM	#39
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 72 1 ton longhorn now!!! Randy is the Carb Good on That Truck< Would it Fit on a 250 6 Cylinder???? Ever Get Cargo Light Yet? Thanks, Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

02-04-2008, 01:55 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Ryan, Not a whole lot of parts left on them Rick, I'm not sure if that carb will fit on a 6 cyl or not, I don't do much carb switching. Sorry no cargo light yet Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-05-2008, 01:52 AM	#41
c-mack Registered User Join Date: May 2007 Location: Crockett, Texas Posts: 581	Re: 72 1 ton longhorn now!!! how much would you take for the steering wheel to 75851 ? thanks colby __________________ 1967 chevy truck 350 V8 1973 VW Transporter/Hippy Bus 1964 VW Baja Bug "When the power of love overcomes the love of power the world will know peace"- Jimi Hendrix

02-05-2008, 01:33 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Colby, it has quite a few cracks in it. $10 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-07-2008, 01:53 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! ttt, this thing is is getting parted this weekend and headed to scrap first of the week. Ask if you see something you need. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-07-2008, 10:35 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! I haven't got it off yet Rick, as I said above it looks good, the only place I have to check is inside rear bottom for rust. And also I got others up here already off. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-11-2008, 07:25 AM	#46
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: 72 1 ton longhorn now!!! pm sent __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

02-11-2008, 08:16 AM	#47
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 72 1 ton longhorn now!!! Randy, I need the radio ash tray (center section of a dash) this one or any other one. Someone cut the ashtray out of my burb and I need a panel to fix it. I would take the hole center sectio so I can graft it in at seams. Please let me know price shipped to 40601 KY. Thanks, Bryan

02-11-2008, 09:03 AM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Sakohntr, Bruce pm'd you back B.Sharp, Bryan, I get $20 plus shipping for center sections of dashes. Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-11-2008, 09:04 AM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1 ton longhorn now!!! Rickstrucks, fender is good 2 small dings on front cup, no rust. All chrome and emblems are off it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-11-2008, 10:13 PM	#50
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: 72 1 ton longhorn now!!! Randy- Are the bed mounting brackets that go on the frame in good condition? (not rusted through) And how much? I need all the mounts to put a longhorn bed on my 1 ton cab chassis as mine has a utility bed on it and different mounts. __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

Register or Log In To remove these advertisements.