anybody ever use this chassis paint?

[Dhalezx12]

I am looking on ebay and there is a company that sell a chassis kit. There name is KBS coatings. I was wanting to know if anybody on here had ever used it or know's someone that has? I am ready to do my frame and have seen about 10 different companies that sell similar products. This kit is very inexspensive, but if it does not work then I will go another route. Thanks for you help.

[ryan913]

I used it on mine and am very pleased with it! A couple of things to consider: If you are spraying it you need to use their thinner and use a cheap through away gun. Brushing works well also but use good paint brushes. I blasted all of my parts before painting them and used 2 coats. If you are brushing you have to wait 6 hours between coats. Very long days and some nights too. Apply thin coats and avoid runs. The paint produces CO2 while drying and will bubble in ran areas. It is a very tough paint! Couldn't even blast it off when I made a mistake.

[70GMCer]

stuff is not cheap I see.....$40 a qt.

[Dhalezx12]

The kit I am looking at is $82 for everything plus shipping. From what I have seen It is one of the cheeper one's there is out there.

[ryan913]

Dont be fooled because a qt. will not do a whole frame if you blast it.