options for fuel injection

[hilljob26]

ok guys,most of you remember my truck,some might not,anyway,its a 72 4x4 w/ 350 crate engine,th350 and a np208 transfer case w/ 3.73 gears.i want to update the drivetrain a little.mainly i want to add fuel injection,and maybe go with a 700r tranny.what i need help on is what have you guys done,all info would be great.did you guys do efi,tpi,what adapters do i need to run a 700r with my transfer case.please,any pics would be great as well.thanx

[cameeks]

This is the fuel injection I'm going with

This is what I was going with when I was going to go TPI

Here is the solution for the TV cable on the 700r4. They also have one for the '82 - '86

TCI® TCI® Automotive
151 Industrial Dr. * Ashland, MS 38603
Phone: 1-888-776-9824 * Fax: (662) 224-8255
www.tciauto.com

Constant Pressure Valve Body™
Now Available For 1987-92 GM 700R4 Transmissions

Latest TCI® Constant Pressure Valve Body™ for GM 1987-92 700R4 eliminates low line
pressure condition and ensures perfect transmission operation
Guarantee proper performance with your 1987-92 GM 700R4 automatic transmission by
installing a new TCI® Constant Pressure Valve Body™. Many street performance enthusiasts
incorrectly install the critical TV cable that is used to set internal line pressure and part throttle
shifting by either leaving it disconnected or improperly adjusted. The result – less then optimum
line pressure that results in clutch and band slippage and ultimately, transmission failure.
Until recently, the TV cable adjustment on GM 700R4 transmissions often required an
experienced mechanic. Compatible with stock and aftermarket transmissions, installation of the
TCI® 700R4 Constant Pressure Valve Body™ avoids common transmission destruction by
maintaining adequate line pressure at all times. While the TV cable still needs connection for
proper transmission operation, the TCI® 700R4 Constant Pressure Valve Body™ provides more
liberty when setting part throttle shift points and works with a variety of cable brackets and
carburetor applications.
For more information about the TCI® 700R4 Constant Pressure Valve Body™ or any other
TCI® product, call us at 1-888-776-9824, or visit us online at www.tciauto.com.

Quick Summary
Product: TCI® 1987-92 GM 700R4 Constant
Pressure Valve Body™
Part Number: #376020
Features & Benefits:
• 1987-92 GM 700R4 Constant Pressure Valve
Body™ eliminates low line pressure due to
improper TV cable adjustment
• Street & mild race applications
• Still maintains part throttle shift points with
TV cable adjustment
• Works with wide variety of throttle brackets
and carburetion systems
• Compatible with stock and aftermarket
transmissions; installation instructions included

[hilljob26]

wow,thanx,those are some great choices,i could use some more if yall got em,i was wondering what would i have to do if i wanted to do a 4l60e as well

[1969-08 chevy]

I have a 69 4x4 swb and I bought the holley commander 950. It's installed, well almost installed and has been almost to easy to install. Depending on injector size and what your motor can handle it's suppose to be good over 1,000 poneys. I got the system with injecters for 400-450 horses. Holley has been great in the technical service department and have answered all my questions regarding the product. The draw back is that you have to use a lap top to program the system, but it's nice to know that holley is there for you. Go to holley.com for info.

[hilljob26]

sounds good,keep em comin